Transformers & Chokes

P-T31 Transformer - Output, 8 W, Single Ended
Specifications
  • Power: 8 W
  • Primary Impedance: 5,000 Ω single-ended
  • Secondary Impedance: 8 Ω
  • Primary DC Resistance (Red to Blue): 230 Ω
  • Mounting Centers: 2.375"
  • Mounting Type: U-bracket
  • Weight: 0.7 lbs
$13.80
Save 11%
Originally: $15.50
P-T154-P-T156-X Filter Choke - Hammond, Open Bracket
Features
  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C.
Starting at $11.40
Save 11%
Originally: $12.81
Note:
P-T155B: 6 mH / 2 A
P-T159ZC: 60 mH / 2 A
P-T156M: 3 H / 100 mA
P-T157Q: 3.5 H / 150 mA
P-T156L: 5 H / 75 mA
P-T154G: 9 H / 40 mA (700 ohm)
P-T155C: 60 H / 8 mA
are special order items.
Note: some of these items are special order items.
P-TF41318 Transformer - Fender® Replacement, Output, 25 Watt, 8 Ohm
Replacement for Deluxe and Deluxe Reverb, 8 ohms.
Equivalent to #125A1A & #041318.
$32.25
Save 11%
Originally: $36.24
P-TF50438 Transformer - Fender®, Output, Hot Rod Deluxe and Blues Deluxe
Fender Original Hot Rod Deluxe and Blues Deluxe output transformer. 40 watts. Equivalent to #050438.
$36.94
Save 11%
Originally: $41.50
P-T1750X-FENDER Transformer - Hammond, Output, replacement for Fender
  • Replacements for Fender Amps
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
Starting at $16.41
Save 11%
Originally: $18.44
P-TF22905 Transformer - Fender® Replacement, Output, 8 W, 3.2 Ohm
Replacement for Fender Champ, VibroChamp, and Bronco amps, 4 ohms.
Equivalent to #125A35A & #022905.
$31.11
Save 11%
Originally: $34.95
P-T125X Transformer - Hammond, Universal Push-Pull
  • Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits).
  • Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz).
  • Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
  • Tables provided with transformer listing 90 pre-calculated impedance ratios.
Starting at $32.77
Save 11%
Originally: $36.82
Note:
P-T125B: 5 W / 45 mA
P-T125D: 10 W / 70 mA
are special order items.
Note: some of these items are special order items.
P-TUBT-3 Transformer - One Electron, Output, 3000 Ω to 16/8/4 Ω
The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc.
$97.86
Save 11%
Originally: $109.95
P-TF49969 Transformer - Output, Replacement for Blues Junior, 15 W
Fender Original Blues Junior output transformer.
Equivalent to #049969.
15 watts.
$22.38
Save 11%
Originally: $25.15
P-TUBT-1 Transformer - One Electron, Output, 1600 Ω to 16/8/4 Ω
The UBT-1 from One Electron is a low-impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s (triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power.
$111.25
Save 11%
Originally: $125.00
P-T166X-6D3 Transformer - Hammond, Low Voltage / Filament, Open, 6.3 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 6.3 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
Starting at $9.77
Save 11%
Originally: $10.98
Note:
P-T166G6: 0.6 A
P-T166J6: 1 A
P-T166K6B: 1.2 A
P-T166S6: 10 A
are special order items.
Note: some of these items are special order items.
P-TM050 Transformer - Marshall Replacement, Output, 50 W
Great for upgrading later issue Marshall™ amps. Good replacement for JMP and JCM 800s.
$68.49
Save 11%
Originally: $76.95
P-TM0100 Transformer - Marshall Replacement, Output, 100 W
Great for upgrading later issue Marshall™ amps. Gives great classic sound.
Good replacement for JMP and JCM 800s. for EL34!
$72.94
Save 11%
Originally: $81.95
P-TUBT-2 Transformer - One Electron, Output, 4800 Ω to 16/8/4 Ω
The UBT-2 from One Electron is the same size and power (15 watts) as the UBT-1, but has a higher primary impedance suitable for single tubes running at B+ voltages of 400 to 500 volts, such as: 50, WE 300B,etc.
$115.66
Save 11%
Originally: $129.95
P-T166X-2D5 Transformer - Hammond, Low Voltage / Filament, Open, 2.5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 2.5 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
Starting at $14.63
Save 11%
Originally: $16.44
Partially Out of Stock
Note: P-T166Q2: 6 A is a special order item.
P-TF22848-X Transformer - Fender® Replacement, Output, 35 W
Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb. Equivalent to #125A6A & #022848.
Starting at $38.27
Save 11%
Originally: $43.00
P-TF22913 Transformer - Replacement for Fender®, Output, 12W, 8Ω
Generic replacement for Fender Princeton Reverb, Tweed Deluxe, 8 ohms. Transformer is not manufactured by Fender, but is equivalent to #125A10B & #022913.


Specifications


Audio Power
12 W (RMS)


Primary Impedance
8,000 Ω


Secondary Impedance
8 Ω


Mounting Centers
2.875"


Mounting Type
Vertical


Weight
1.0 lbs


Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$35.56
Save 11%
Originally: $39.95
P-T125XSE Transformer - Hammond, Universal Single Ended
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE).
  • For push-pull output use, see P-T125A - optimized for push-pull tube output circuits.
  • Open style with minimum 12" long primary & secondary leads leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.
Starting at $40.80
Save 11%
Originally: $45.84
Note: P-T125GSE: 25 W / 100 mA is a special order item.
P-T1650X Transformer - Hammond, Tube Output, Push-Pull
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
Starting at $75.87
Save 11%
Originally: $85.25
Note: P-T1650W: 280 W / 1.9 kΩ is a special order item.
P-T193X Filter Choke - Hammond, D.C. choke, Enclosed
  • Enclosed, 4-hole mount chokes
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 8" long leads.
  • Units will exhibit less inductance at slightly higher currents or more at lower currents.
  • Perfect for high voltage power supply filtering, case matches power transformers & tube audio output transformers.
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • For more sizes and voltages (open - bracket mount type) - see P-T154-P-T156-X
  • Operating temperature range is -40C to 85C
Starting at $34.40
Save 11%
Originally: $38.65
Partially Out of Stock
Note:
P-T193T: 0.05 H / 2 A
P-T193N: 3 H / 500 mA
P-T193P: 5 H / 500 mA
P-T193G: 10 H / 150 mA
P-T193M: 10 H / 300 mA
P-T193Q: 10 H / 500 mA
P-T193B: 12 H / 100 mA
P-T193C: 20 H / 100 mA
are special order items.
Note: some of these items are special order items.
P-T166N12 Transformer - Hammond, Low Voltage / Filament, Open, 12.6 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 12.6 C.T.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).
$21.96
Save 11%
Originally: $24.67
P-T125H Transformer - Hammond, Output, 8 W, 10k Primary
Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187
$32.93
Save 11%
Originally: $37.00
P-TF36485 Transformer - Fender®, Output, 50 W, 2 Ω
Fender® Original '59 Bassman Reissue output transformer. Equivalent to #036485.
$46.24
Save 11%
Originally: $51.95
P-T167X-6D3 Transformer - Hammond, Low Voltage / Filament, Enclosed, 6.3 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 6.3 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Starting at $33.97
Save 11%
Originally: $38.17
Note:
P-T167N6: 4 A
P-T167T6: 12 A
are special order items.
Note: some of these items are special order items.
Don't see what you're looking for? Send us your product suggestions!