Transformers & Chokes

P-T166MS Transformer - Hammond, Filament, 5 VCT, 3 A, Open Style
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 5 VCT, 3 A
  • Mounting Centers: 2.81", u-bracket

Key Features
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$20.56
P-T166N12 Transformer - Hammond, Filament, 12.6 VCT, 4 A
  • Primary 115 VAC, 60 Hz
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
  • Specifications Rating: 12.6 VCT, 4 A Mounting Centers: 3-1/8", u-bracket
$24.67
P-T166N6 Transformer - Hammond, Filament, 6.3 VCT, 4 A, Open Style
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 4 A
  • Mounting Centers: 2.81", u-bracket

Key Features
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$12.81
P-T166Q6 Transformer - Hammond, Filament, 6.3 VCT, 6 A
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 6 A
  • Mounting Centers: 3-1/8", u-bracket

Key Features
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$30.83
P-T166S2 Transformer - Hammond, Filament, 2.5 VCT, 10 A
  • Primary 115 VAC, 60 Hz.
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees, C).
  • Hi-Pot test of 2,000 V RMS.
  • UL listed (# E50394) & CSA certified (# LR3902).

Specifications Rating: 2.5 VCT, 10 A Mounting Centers: 3-1/8", u-bracket
$24.67
P-T167G120 Transformer - Hammond, Filament, 120 VCT, 0.5 A
Special Order Item
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 120 VCT, 0.5 A
  • Mounting Centers: 2" x 1.69", vertical

Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$52.73
Out of Stock
P-T167U6 Transformer - Hammond, Filament, 6.3 VCT, 16 A
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 16 A
  • Mounting Centers: 2" x 2.19", vertical

Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$58.33
P-T1750A Transformer - Hammond, Output for Fender, 3.5W 22.8kΩ
Replacement for Reverb Driver Equivalent to manufacturer part number #125A20B & #022921 Warning: Not all amplifier models of the same name use the same transformer model.
$18.44
P-T1750C Transformer - Hammond, Output replacement for Fender, 5W 5kΩ / 8kΩ
Replacement for Bronco (AA764, AB764, Blackface, Silverface), Champ (Tweed, 5C1, 5E1, 5F1, AA764, Blackface, Silverface, Vibro Blackface), Harvard (6G10), Princeton (Tweed, 5B2, 5C2, 5D2, 5E2, 5F2, 5F2A). Equivalent to manufacturer part number #125A35A and #022905 Warning: Not all amplifier models of the same name use the same transformer model.
$33.80
P-T1750E Transformer - Hammond, Output replacement for Fender, 15W 8kΩ
Replacement for Princeton Reverb, Tweed Deluxe Equivalent to manufacturer part number #125A10B and #022913 Warning: Not all amplifier models of the same name use the same transformer model.
$38.42
P-T1750F Transformer - Hammond, Output replacement for Fender, 15W 6950Ω
Special Order Item
Replacement for Blues Junior Equivalent to manufacturer part number #49969 Warning: Not all amplifier models of the same name use the same transformer model.
$47.16
Note: special order items require additional lead time. See our page on special order items.
P-T1750H Transformer - Hammond, Output replacement for Fender, 20W 6.6kΩ
Replacement for Deluxe, Deluxe Reverb Equivalent to manufacturer part number #125A1A & #022640 Warning: Not all amplifier models of the same name use the same transformer model.
$38.42
P-T1750J Transformer - Hammond, Output replacement for Fender, 35W 4kΩ
Replacement for Pro-Reverb, Tremolux, Vibrolux Equivalent to manufacturer part number #125A6A and #022848 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications:























Primary: 4,000 C.T.Ω
Secondary:
Power: 35 W
Amp Type: Push-Pull
Coil Type: Plastic Bobbin

Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$50.37
P-T1750K Transformer - Hammond, Output replacement for Fender, 50W 4kΩ
Replacement for Tweed Bassman, Super Reverb Equivalent to manufacturer part number #125A9A and #022855 Warning: Not all amplifier models of the same name use the same transformer model.
$78.89
P-T1750L Transformer - Hammond, Output replacement for Fender, 50W 4.2kΩ
Replacement for Bassman Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.
$77.60
P-T1750M Transformer - Hammond, Output for Fender, 50W 4.2kΩ, general
General Replacement Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.
$78.89
P-T1750N Transformer - Hammond, Output for Marshall, 50W 3.2kΩ
Replacement for JMP, JCM800 Specifications
  • Primary: 3,200 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull

Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$86.55
P-T1750P Transformer - Hammond, Output for Marshall, 50W 126, 500, 2kΩ
Special Order Item
Replacement for JCM900
Specifications
  • Primary: 126, 500, 2000Ω
  • Secondary: 2Ω, 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$112.88
Note: special order items require additional lead time. See our page on special order items.
P-T1750Q Transformer - Hammond, Output for Marshall, 50W 7371Ω
Replacement for JTM45
Specifications
  • Primary: 7,371 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$99.06
P-T1750T Transformer - Hammond, Output replacement for Vox AC30 Reissue
Replacement for Vox AC30 Reissue
Specifications
  • Power: 30 W
  • Primary Impedance: 4,000 Ω CT
  • Secondary Impedance: 8 Ω, 16Ω
  • Coil Type: Bobbin
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$118.20
P-T1750U Transformer - Hammond, Output for Marshall, 100W 1.7kΩ
Replacement for JMP, JCM800
Specifications
  • Primary: 1,700 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 100 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$127.31
P-T1750V Transformer - Hammond, Output replacement for Vox AC30 Vintage
Special Order Item
Replacement for Vox AC30 Vintage
Specifications
  • Power: 30 W
  • Primary Impedance: 4,000 Ω CT
  • Secondary Impedance: 8 Ω, 16Ω
  • Coil Type: Paper
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$136.47
Note: special order items require additional lead time. See our page on special order items.
P-T1750W Transformer - Hammond, Output replacement for Fender, 100W 2kΩ
Replacement for Dual Showman, Twin Reverb Equivalent to manufacturer part number #125A29A and #022889 Warning: Not all amplifier models of the same name use the same transformer model.
$93.48
P-T1750X Transformer - Hammond, Output for Marshall, 100W 126, 500, 2kΩ
Special Order Item
Replacement for JCM900
Specifications
  • Primary: 126, 500, 2000Ω
  • Secondary: 2Ω, 4Ω, 8Ω, 16Ω
  • Power: 100 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$146.22
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!