1. Home
  2. Products
  3. Transformers & Chokes

Transformers & Chokes

products per page
P-TM950O Transformer - Marshall, Output, 50 W, for JCM 900
Genuine Marshall™ output transformer for JCM900 and JCM2000.
$117.80
P-TM950P Transformer - Marshall, Power, 50 W, for JCM 900
Genuine Marshall™ 50 watt power transformer for JCM900.
$115.00
P-TVC30V Filter Choke - Vox, for Vintage AC30
Genuine Vox filter choke for vintage AC30.
$84.95
Out of Stock
P-TVO30V Transformer - Vox, Output, for Vintage AC30
Genuine Vox output transformer for vintage AC30.
$109.95
Out of Stock
P-RC-3 Choke - One Electron, Audio, PRC-3, 225H for Preamp Output
The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.
$69.95
P-C194G Choke - Hammond, Replacement for Marshall Plexi
Replacement for Marshall Plexi Specifications:
  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$22.14
P-T290WEX Transformer - Hammond, 240V for Stand Alone Reverb 1963
Replacement for Fender Stand Alone Reverb - 1963 Equivalent to Fender part number 47609 Primary:240 VAC, 50 Hz. Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Plastic Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Warning: Not all amplifier models of the same name use the same transformer model.
$41.00
P-TF37610 Transformer - Fender®, Power, for '65 Twin Reverb Reissue
Made precisely to the original Fender® specifications. Drop-in replacement for '65 Twin Reverb Reissue. Made in the USA. 120V Primary.
$79.95
P-C159V Filter Choke - Hammond, Open Bracket, 1.5 H, 500 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Inductance (+/- 15%) 1.5H D.C. Current 500 ma. Resistance (+/- 15%) 27 ohms Maximum Operating Volt (D.C.) 500V
$27.58
P-C159Y Filter Choke - Hammond, Open Bracket, 0.6 H, 750 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Inductance (± 15%) 0.6H D.C. Current 750 ma. Resistance (± 15%) 11 ohms Maximum Operating Volt (D.C.) 500V
$27.58
P-T1760E Output Transformer - Hammond, 15W, 8kΩ, Push-Pull
Replacement for Princeton Reverb, Tweed Deluxe Equivalent to manufacturer part number #125A10B and #022913 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications: Primary: 8,000 C.T.Ω Secondary: 4Ω, 8Ω, 16Ω Power: 15 W Amp Type: Push-Pull Core Type: Plastic Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$41.52
P-T290CAX Transformer - Hammond, 120V for Harvard
Hammond tube guitar amp power transformer.
  • Compatible with Fender Harvard
  • Made In Canada
$67.25
P-TF413160 Transformer - Fender, Power, for Deluxe Reverb 120V
Genuine Fender power transformer designed for use in the ‘65 Deluxe Reverb as well as the ‘68 Deluxe. Made to original fender specifications. 120V Primary
$74.95
P-T1750PA Output Transformer - Hammond, For 18W Combo
18 Watts, 4/8/16 ohms.
$37.50
P-T290PAZ Power Transformer - Hammond, For 18W Combo
Hammond transformer/replacement for 18W Combo
$96.50
P-TM45P Transformer - Marshall Replacement, Power for JTM45
Replacement power transformer for Marshall JTM45.
$110.00
P-TF22848-A Transformer - Fender® Replacement, Output, 35W, 8 Ohm
Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb, 8 ohms. Equivalent to #125A6A & #022848.



Specifications



Audio Power
35 W (RMS)


Primary Impedance
4,000 CT Ω


Secondary Impedance
8 Ω


Mounting Centers
3.5"


Mounting Type
Vertical


Weight
2.4 lbs


Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
$44.95
P-T290UX Transformer - Hammond, 120V for Hot Rod Deluxe
Replacement power transformer for Hot Rod Deluxe. Equivalent to Fender 036958. 120VAC / 60Hz. 40 Watt output.
$68.07
P-T290QX Transformer - Hammond, Classic replacement for Marshall JTM30
Replacement for Marshall JTM 45. Primary: 120/240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Plastic Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$102.10
P-T290BBX Power Transformer - Hammond, 120V for Fender Deluxe 5E3
Replacement for Fender Deluxe 5E3.Primary:120 VAC, 60 Hz. Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Paper Core
  • Material used & design specs. were kept as close as possible to the original art to preserve the stock "tone".
$77.95
P-T1750JA Output Transformer - Hammond, for Fender Hot Rod Deluxe, 40W 4.25kΩ
Replacement for Hot Rod Deluxe
Equivalent to manufacturer part number #50438
Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
Specifications:


Primary:
4,250 C.T.Ω


Secondary:
4Ω, 8Ω


Power:
40 W


Amp Type:
Push-Pull


Core Type:
Paper


Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$59.21
P-T290TX Transformer - Hammond, Power for Fender Bassman '59 Reissue
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$119.12
P-T291AEX Transformer - Hammond, Power for Bronco, Champ, Princeton, etc.
For Bronco (Blackface, AA764, AB764) Champ (5C1, 5E1, 5F1, Tweed, Blackface, Silverface, AA764) Vibro Champ (Blackface, Silvewrface, AA764) Princeton (Tweed, Brown, Blackface, Silverface, AA964) Princeton Reverb (AA1164, AA764, B1270, Blackface, Silverface). Similar to 125P1B, 022772 but 50/60 Hz.
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Primary 120/220/230/240VAC 50/60Hz. Secondary 325-0-325 / 275-0-275, 100mA Secondary 6.3VCT, 2.25A Secondary 5V, 3A
$93.37
P-T290CBZ Transformer - Hammond, For '65 Deluxe Reverb Reissue Blackface
For 65 Deluxe Reverb Reissue Blackface & 68 Silverface. Similar to 41316.
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Primary 120V, 60Hz. Secondary 325-0-325 with 38V tap, 120mA Secondary 5V, 3A Secondary 6.3VCT, 4A
$114.95
Don't see what you're looking for? Send us your product suggestions!