1. Home
  2. Products
  3. Transformers & Chokes

Transformers & Chokes

products per page
P-T272X Transformer - Hammond, Power, 310-0-310 V, 80 mA
Specifications:
  • Size: 74 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 620V.C.T.
$69.85
P-T278X Transformer - Hammond, Power, 400-0-400 V, 230 mA
Specifications:
  • Size: 229 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 800V.C.T. @ 230mA
  • Filament Winding #1: 5 V C.T. @ 3 A
  • Filament Winding #2: 6.3 V C.T.
$125.87
P-T372BX Transformer - Hammond, Power, 300-0-300 V, 115 mA, Univ. Primary
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers.
  • Class A insulation (105 degrees C).
  • Hi-Pot tested to 2,500 VAC.
  • Windings are concentric wound for low stray field and low noise.

Secondary: 300-0-300 V, 115 mA Filament winding 1 : 5 VCT, 2 A Filament winding 2 : 6.3 VCT, 3 A Mounting centers: 2.5" x 2.19" vertical mount Weight:
$100.42
P-RC-2 Choke - One Electron, Audio, PRC-2, for Shunt Feed SE Output
The PRC-2 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes.
$69.95
P-T1650P Transformer - Hammond, Tube Output, Push-Pull, 60W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$140.22
P-T1750Q Transformer - Hammond, Output for Marshall, 50W 7371Ω
Replacement for JTM45
Specifications
  • Primary: 7,371 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$101.91
P-T261C6 Transformer - Hammond, Plate & Filament or Bias, 250V@45mA
Specifications:
  • Primary: 115 VAC, 125 VAC, 60 Hz.
  • Secondary #1: 250 VCT @ 45 mA
  • Filament Secondary #2: 6.3 V @ 1 A
  • Mounting Centers: 2.81" u-bracket
  • Weight: 1 lbs.
Features:
  • Primary 115 VAC, 60 Hz.
  • Designed for small power or bias supplies, test equipment, preamps etc.
  • Can also be used with full wave C.T. rectifiers.
  • Economical , two hole, channel bracket, chassis mount.
  • Minimum 5" long leads.
  • Convenient 6.3 or 12.6 volt filament/auxiliary winding.
$46.23
P-T290MX Transformer - Hammond, Power, 275-0-275 V, 230 mA
Specifications:























Dual Primary: 120 VAC / 120 VAC, 50/60 Hz.
A.C. high Voltage Secondary RMS: 550V.C.T. @ 230mA
Filament Winding #1 5 V @ 3 A
Filament Winding #2 6.3 V @ 6 A
Bobbin: Plastic
$110.00
P-T290PX Transformer - Hammond, Classic replacement for Vox AC15
Replacement for Vox AC15
Primary: 120/240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$99.13
P-T370FX Transformer - Hammond, Power, 275-0-275 V, 173 mA, Univ. Primary
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers.
  • Class A insulation (105 degrees C).
  • Hi-Pot tested to 2,500 VAC.
  • Windings are concentric wound for low stray field and low noise.

Secondary: 275-0-275 V, 173 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 5 A Mounting centers: 2.5" x 2.94" vertical mount Weight:
$113.69
P-TF41752 Transformer - Fender®, Power, Hot Rod Deville
Fender Original Hot Rod DeVille Power Transformer. Equivalent to #041752.
$94.95
On Backorder
P-T125FSE Transformer - Hammond, Universal Single Ended, 20 W, 90 mA
Transformer - Hammond, Universal Single Ended, 20 W, 90 mA max DC bias
  • Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits.
  • Frequency response: 100 Hz. - 15 Khz at full rated power (± 1db max. - ref. 1 Khz).
  • For full frequency response (20 Hz. to 20 Khz.) - see our 1627-1642 series.
  • For push-pull output use, see our 125 series.
  • Open style with minimum 12" long primary & secondary leads.
  • All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C.
$87.43
P-C194D Choke - Hammond, Replacement for Vox AC30 reissue
Replacement for Vox AC30 reissue
Specifications:
  • Inductance ± 15%: 5 H
  • D.C. Current: 150 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$37.94
P-RC-1 Choke - One Electron, Audio, PRC-1, for Shunt Feed SE Output
The PRC-1 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes.
$85.00
P-T1650G Transformer - Hammond, Tube Out, Easy Secondary, 35W 6.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$125.37
P-T1750Y Transformer - Hammond, Output replacement for Vox AC15
Replacement for Vox AC15.
Specifications
  • Power: 15 W
  • Primary Impedance: 6,300 Ω CT
  • Secondary Impedance: 8 Ω
  • Coil Type: Bobbin
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$86.64
P-T290BEX Transformer - Hammond, 240V for Deluxe, Deluxe Reverb
Replacement for Fender Deluxe, Deluxe Reverb Equivalent to Fender part number 125P23D & 041316 Primary:240 VAC, 50 Hz. For 120V version, see P-T290BX Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Paper Core
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Warning: Not all amplifier models of the same name use the same transformer model.
$95.17
P-TF26477 Transformer - Fender®, Power, for Tone Master
Fender® Original Tone Master Power Transformer. Equivalent to #026477.
$179.95
On Backorder
P-TF36483 Transformer - Fender®, Power, for '59 Bassman Reissue
Fender® Original '59 Bassman Reissue Power Transformer. Equivalent to #036483.
$89.95
P-TMJTM30-O Transformer - Marshall, Output, 30 W, for JTM30
Genuine Marshall™ 30 watt output transfomer for JTM30.
$42.95
P-C1536X Choke - 0.17 - 250, Heavy Duty Hash Choke
Molded powdered iron core.
1-1/4 long axial leads.
High inductance & high current.
L measured at 1 Khz. Inductance: 250 µH20% tolerance
DC resistance ohms: .17
Self Resonant Frequency (MHz): 1.5
Maximum DC current amps: 2.5
Coil diameter (in): .43
Core Length (in): 1.25
$1.15
S-H135 Form - Ceramic, 2-½" x ½" Diameter, 6-32 Threads
Use as a standoff, coil/choke form, or antenna coil.
$0.20
P-T1750T Transformer - Hammond, Output replacement for Vox AC30 Reissue
Replacement for Vox AC30 Reissue
Specifications
  • Power: 30 W
  • Primary Impedance: 4,000 Ω CT
  • Secondary Impedance: 8 Ω, 16Ω
  • Coil Type: Bobbin
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$107.23
P-T1750U Transformer - Hammond, Output for Marshall, 100W 1.7kΩ
Replacement for JMP, JCM800
Specifications
  • Primary: 1,700 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 100 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$115.47
Don't see what you're looking for? Send us your product suggestions!