Transformers & Chokes

P-T1750W Transformer - Hammond, Output replacement for Fender, 100W 2kΩ
Replacement for Dual Showman, Twin Reverb Equivalent to manufacturer part number #125A29A and #022889 Warning: Not all amplifier models of the same name use the same transformer model.
$93.48
P-T125H Transformer - Hammond, Output, 8 W, 10k Primary
Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187
$37.00
P-T1650F Transformer - Hammond, Tube Output, Push-Pull, 25W 7.6kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$109.25
P-T1650K Transformer - Hammond, Tube Output, Push-Pull, 50W 3.4kΩ
  • Designed for push-pull tube output circuits.
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
$133.49
P-T1750L Transformer - Hammond, Output replacement for Fender, 50W 4.2kΩ
Replacement for Bassman Equivalent to manufacturer part number #125A13A and #022871 Warning: Not all amplifier models of the same name use the same transformer model.
$77.60
P-TBFT-1B Transformer - One Electron, BFT-1B, Power
The BFT-1B from One Electron was designed to power a stereo amplifier using UBT-1's in each channel but will also power an 80 watt push-pull tube amplifier. The BFT-1B is slightly larger than earlier versions of the BFT-1, allowing lower flux density and cooler operation. The tapped high-voltage windings and three filament windings provide flexibility in design. An electrostatic shield between the primaries and secondaries reduces power-line noise coupling. The primary arrangements allows use on virtually any power grid in the world.
$225.00
P-TF36485 Transformer - Fender®, Output, for '59 Bassman Reissue
Fender® Original '59 Bassman Reissue output transformer. Equivalent to #036485.
$51.95
P-T155J Filter Choke - Hammond, Open Bracket, 15 H, 30 mA
  • Inductance: 15 H
  • D.C. Current: 30 mA
  • Resistance: 1026 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$15.53
P-T158T Filter Choke - Hammond, Open Bracket, 1 H, 300 mA
  • Inductance: 1 H
  • D.C. Current: 300 mA
  • Resistance: 40 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$21.05
P-T167S6 Transformer - Hammond, Filament, 6.3 VCT, 10 A, Enclosed
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 6.3 VCT, 10 A
  • Mounting Centers: 2" x 1.69", vertical

Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$52.06
P-C194E Choke - Hammond, Replacement for Vox AC30 vintage
Replacement for Vox AC30 vintage
Specifications:
  • Inductance ± 15%: 30 H
  • D.C. Current: 100 mA
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$34.36
P-T1750N Transformer - Hammond, Output for Marshall, 50W 3.2kΩ
Replacement for JMP, JCM800 Specifications
  • Primary: 3,200 C.T.Ω
  • Secondary: 4Ω, 8Ω, 16Ω
  • Power: 50 W
  • Amp Type: Push-Pull

Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$86.55
P-T270CX Transformer - Hammond, Power, 275-0-275 V, 75 mA
Specifications:
  • Size: 59 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 550V.C.T.
$66.95
P-T274BX Transformer - Hammond, Power, 375-0-375 V, 201 mA
Specifications:
  • Size: 198 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 750V.C.T. @ 201mA
  • Filament Winding #1: 5 V C.T. @ 3 A
  • Filament Winding #2: 6.3 V C.T.
$103.27
P-T373BX Transformer - Hammond, Power, 350-0-350 V, 201 mA, Univ. Primary
  • Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
  • High voltage secondary designed for full wave center tapped use.
  • 50 VAC bias tap from high voltage secondary C.T.
  • Black epoxy painted to match our P-T1650 series of output transformers.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000 V RMS.
  • Windings are concentric wound for low stray field and low noise.

Secondary: 300-0-300 V, 201 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 5 A Mounting centers: 3" x 2.81" vertical mount Weight: 8
$129.33
P-TF22871 Transformer - Fender® Replacement, Output, 50 W, 4 Ohm
Replacement for Bassman heads. Equivalent to #125A13A & #022871.
$69.95
P-TM45O Transformer - Marshall, Output, for JTM45
Genuine Marshall™ output transformer for JTM45.
$135.00
P-TM9100O Transformer - Marshall, Output, 100 W, for JCM900
Genuine Marshall™ 100 watt output transformer for JCM900 and JCM2000.
$139.95
On Backorder
P-T154M Filter Choke - Hammond, Open Bracket, 2 H, 100 mA
  • Inductance: 2 H
  • D.C. Current: 100mA
  • Resistance: 175 ohms
  • Maximum Operating Voltage: 300 V
Features
  • Economical "open bracket" - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5" long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
  • Part No.: Inductance ± 15%: D.C.
  • $13.02
    P-C194C Choke - Hammond, replacement for Marshall Plexi JCM800
    Replacement for Marshall Plexi JCM 800.
    Specifications:
    • Inductance ± 15%: 40 H
    • D.C. Current: 50 mA
    Features:
    • Designed for drop in replacement of original units.
    • Physically, parts were designed to look similar to original factory units (where possible).
    • Inductances measured at rated D.C. current.
    • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
    • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
    $35.12
    P-T1615 Transformer - Hammond, Tube Output, Push-Pull, 15W 5kΩ
    • Designed for push-pull tube output circuits.
    • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
    • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
    $94.89
    P-T1650H Transformer - Hammond, Tube Output, Push-Pull, 40W 6.6kΩ
    • Designed for push-pull tube output circuits.
    • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
    • Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref.
    $127.07
    P-T1750K Transformer - Hammond, Output replacement for Fender, 50W 4kΩ
    Replacement for Tweed Bassman, Super Reverb Equivalent to manufacturer part number #125A9A and #022855 Warning: Not all amplifier models of the same name use the same transformer model.
    $78.89
    P-T272X Transformer - Hammond, Power, 310-0-310 V, 80 mA
    Specifications:
    • Size: 74 VA
    • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
    • A.C. High Voltage Secondary RMS: 620V.C.T.
    $71.85
    Don't see what you're looking for? Send us your product suggestions!