Transformers & Chokes

P-CF22707 Filter Choke - 50 mA for Fender® Deluxe & Vibrolux
Replacement for Fender Deluxe and Vibrolux. Equivalent to #125C3A & #022707.
$12.95
P-C194G Choke - Hammond, Replacement for Marshall Plexi
Replacement for Marshall Plexi Specifications:
  • Inductance ± 15%: 3 H
  • D.C. Current: 250 mA

Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Inductances measured at rated D.C. current.
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.
$22.14
P-C159V Filter Choke - Hammond, Open Bracket, 1.5 H, 500 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Inductance (+/- 15%) 1.5H D.C. Current 500 ma. Resistance (+/- 15%) 27 ohms Maximum Operating Volt (D.C.) 500V
$27.58
P-C159Y Filter Choke - Hammond, Open Bracket, 0.6 H, 750 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Inductance (± 15%) 0.6H D.C. Current 750 ma. Resistance (± 15%) 11 ohms Maximum Operating Volt (D.C.) 500V
$27.58
P-T1182D240 Transformer - Hammond, Toroidal Power, 30VA
Special Order Item
Toroidal power transformer. 30VA, 50/60 Hz. 12.30% voltage regulation, open toroid center.
  • Torodial transformer benefits:
    • low profile
    • lightweight
    • cool running / high efficiency
    • due to the core shape - low stray magnetic flux leakage (low EMI)
  • Dual 117/234 VAC primary, 50/60 Hz. operation.
  • Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer.
  • Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware
  • Minimum 8" long flexible leads
  • Manufactured using Class B (130 degree C) materials.
  • Hi-Pot test of 4,000VAC RMS between primary & secondary
  • UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
  • CSA certified to C22.2 #66 - CSA file #209651
  • CE compliant to IEC 61558-2-4
$55.56
Note: special order items require additional lead time. See our page on special order items.
P-T145B Transformer - Hammond, Audio driver, 145B
Special Order Item
Audio TX driver, chassis mount.
  • Small, economical, open, two hole horizontal bracket mount.
  • Insulated, color coded flexible leads, 4" long minimum
  • Frequency response 150 Hz. to 15 Khz. (± 1 db, reference 1000 Hz.)
  • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
  • Primary: 600 ohms
  • Secondary: 600 ohms
  • Primary D.C.: 18 mA
  • D.C. Resistance (±15%): 30 ohms primary, 38 ohms secondary
  • Output: 200 mW
$21.98
Note: special order items require additional lead time. See our page on special order items.
P-T161E24 Transformer - Hammond, Power, 115V, 34V/50mA, 1.2VA, 161E24
Special Order Item
  • Vertical mount, split bobbin design.
  • Non-concentric wound.
  • Low primary to secondary coupling - no electrostatic shield required.
  • High insulation - Hipot of 2,000V RMS.
  • Class B insulation - 130 degrees C.
  • CSA certified (File # LR3902) and UL recognized (File #E207860).
$7.69
Note: special order items require additional lead time. See our page on special order items.
P-T1630SEA Audio Transformer - Hammond, 30W, 3.5kΩ, 42H, Tube Output
Special Order Item
  • "Over designed" for high fidelity, single ended, Class-A, tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), four slot, chassis Type "X" mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (+/- 1 db max., ref. 1 Khz.)
  • Insulated flexible leads 8" min.
  • For maximum versatility, all units include a 40% screen tap for Ultra-Linear, tetrode/pentode operation (if desired).
  • High quality laminations, (M6) grain oriented silicon steel.
  • Core is gapped to reduce core saturation in Class-A tube amplifier circuits.
$193.01
Note: special order items require additional lead time. See our page on special order items.
P-T164F28 Power Transformer - Hammond, 115V, 28V/200mA, 6VA
Special Order Item
  • Both series operate on 50/60 Hz current
  • Low profile, split bobbin design.
  • Dual winding secondaries, non-concentrically wound
  • Units are designed so that all windings must be used
  • Low primary to secondary coupling - no electrostatic shield required.
  • High insulation - Hipot of 2,500V RMS.
  • Class B insulation - 130 degrees C.
  • c UL us recognized
$9.61
Note: special order items require additional lead time. See our page on special order items.
P-T164H28 Power Transformer - Hammond, 115V, 28V/700mA, 20VA
Special Order Item
  • Both series operate on 50/60 Hz current
  • Low profile, split bobbin design.
  • Dual winding secondaries, non-concentrically wound
  • Units are designed so that all windings must be used
  • Low primary to secondary coupling - no electrostatic shield required.
  • High insulation - Hipot of 2,500V RMS.
  • Class B insulation - 130 degrees C.
  • c UL us recognized
$14.94
Note: special order items require additional lead time. See our page on special order items.
P-T1650PA Audio Transformer - Hammond, 60W, 6.6kΩ, Push-Pull Tube Output
Special Order Item
  • Designed for push-pull tube output circuits.
  • Units are designed to provide ample "headroom" at bass frequencies
  • Has a secondary tap for 4, 8 or 16 ohm outputs.
  • Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
  • Manufactured with plastic coil forms for coil support and insulation.
  • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum.
  • Insulated flexible leads 8" min.
  • Includes 40% screen taps for Ultra-Linear operation (if desired).
  • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
$181.31
Note: special order items require additional lead time. See our page on special order items.
P-T165P60 Transformer - Hammond, Power, 115V, 60V/5A, 300VA
Special Order Item
Low Voltage, Filament High Current, Chassis Mount. 115 V primary.
$92.56
Note: special order items require additional lead time. See our page on special order items.
P-T166G36 Power Transformer - Hammond, 115V, 36V/500mA, 18VA
Special Order Item
  • Economical single primary 115 VAC, 60 Hz.
  • Center tapped secondary
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • We use Class B insulation (130 degrees, C) for extra protection - UL listed as a Class A (105 degree, C) design
  • Hi-Pot test of 2,000V RMS.
  • UL listed.
  • CSA certified.
$25.00
Note: special order items require additional lead time. See our page on special order items.
P-T166J6 Transformer - Hammond, Power, 115V/60Hz, 6.3VA, 6.3V/1A
Special Order Item
6.3 VA, 115V 60 Hz primary. 6.3 VAC 1A secondary
$18.18
Note: special order items require additional lead time. See our page on special order items.
P-T166N12B Transformer - Hammond, Power, 117V, 48VA, 12V/4A
Special Order Item
48 VA, 117V 50/60 Hz primary. 12 VAC 4A secondary.
$25.01
Note: special order items require additional lead time. See our page on special order items.
P-T166U7 Transformer - Hammond, Power, 115V/60Hz, 112.5VA, 7.5V/15A
Special Order Item
112.5 VA, 115V 60 Hz primary. 7.5 VAC 15A secondary.
  • Economical single primary 115 VAC, 60 Hz
  • Center tapped secondary.
  • Open style, channel bracket, two hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • We use Class B insulation (130 degrees, C) for extra protection - UL listed as a Class A (105 degree, C) design
  • Hi-Pot test of 2,000V RMS.
  • UL listed.
  • CSA certified.
$61.37
Note: special order items require additional lead time. See our page on special order items.
P-T167L60 Power Transformer - Hammond, 115V, 60V/2A, 120VA
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • 60 C.T. Secondary 2 Amps
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
$65.90
Note: special order items require additional lead time. See our page on special order items.
P-T171E Transformer - Hammond, line isolation/plug & receptacle, 500VA
Special Order Item
500VA capacity. 93% full load efficiency, 0.18% harmonic distortion at full load. 20pF capacitance between windings at 1Khz. 5A circuit breaker.
$189.51
Note: special order items require additional lead time. See our page on special order items.
P-T1760E Output Transformer - Hammond, 15W, 8kΩ, Push-Pull
Replacement for Princeton Reverb, Tweed Deluxe Equivalent to manufacturer part number #125A10B and #022913 Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here. Specifications: Primary: 8,000 C.T.Ω Secondary: 4Ω, 8Ω, 16Ω Power: 15 W Amp Type: Push-Pull Core Type: Plastic Features:
  • Designed for drop in replacement of original units
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used and design specs were kept as close as possible to the original part to preserve the stock "tone".
$41.52
P-T193N Filter Choke - Hammond, 3H, 500mA, 35Ω, Chassis Mount
Special Order Item
3H inductance, 500 mA D.C. current, 35 ohms. Maximum operating voltage is 600V.
$80.95
Note: special order items require additional lead time. See our page on special order items.
P-T229B230 Transformer - Hammond, Power, 115V/230V, 230V/50mA, 12VA
Special Order Item
Low profile mounting, dual - split bobbin design. 12VA.
$15.18
Note: special order items require additional lead time. See our page on special order items.
P-T262F12 Transformer - Hammond, low power plate & filament
Special Order Item
Designed for small power or bias supplies, test equipment, preamps etc. Primary 115 VAC, 60 Hz. 120V @ 140mA A.C. secondary, 12.6V @ 0.75A A.C. filament secondary.
$39.75
Note: special order items require additional lead time. See our page on special order items.
P-T850HA Audio Transformer - Hammond, 150/600Ω, Line Isolation
Special Order Item
  • 150/600 Ohm Primary Impedance
  • 300/1200 Ohm Secondary Impedance
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response ± 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz. under full power.
  • Electrostatic shield between pri. & sec. connected to the green lead.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Lead length: Min. 4"
$146.22
Note: special order items require additional lead time. See our page on special order items.
P-TF413160 Transformer - Fender, Power, for Deluxe Reverb 120V
Genuine Fender power transformer designed for use in the ‘65 Deluxe Reverb as well as the ‘68 Deluxe. Made to original fender specifications. 120V Primary
$74.95
Don't see what you're looking for? Send us your product suggestions!