Transformers & Chokes

P-T229B230 Transformer - Hammond, Power, 115V/230V, 230V/50mA, 12VA
Special Order Item
Low profile mounting, dual - split bobbin design. 12VA.
$15.18
Note: special order items require additional lead time. See our page on special order items.
P-T1640SEA Transformer - Hammond, Output, Single-Ended, 30 W
Special Order Item
  • Over designed for single ended tube output circuits (triode, tetrode or pentode tubes).
  • Enclosed (shielded), 4 slot, above chassis Type 'X' mounting.
  • Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref.
$193.01
Note: special order items require additional lead time. See our page on special order items.
P-T1750G Transformer - Hammond, Output for Yorkville/Traynor 50W
Special Order Item
Replacement for Yorkville/Traynor 50W General
Specifications
  • Power: 50 W
  • Primary Impedance: 3,800 Ω CT
  • Secondary Impedance: 4Ω, 8Ω, 16Ω
  • Coil Type: Paper
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$165.71
Note: special order items require additional lead time. See our page on special order items.
P-T273DX Transformer - Hammond, Power, 350-0-350 V, 103 mA
Special Order Item
Specifications:
  • Size: 101 VA
  • Dual Primary: 117 VAC, 50/60 Hz.
  • A.C. High Voltage Secondary RMS: 700V.C.T. @ 103mA
  • Filament Winding #1: 5 @ 2 A
  • Filament Winding #2: 6.3 V C.T.
$117.11
Note: special order items require additional lead time. See our page on special order items.
P-T290KX Transformer - Hammond, for Marshall JCM900-50W
Special Order Item
Replacement for Marshall JCM900 - 50 Watt Primary: 120/240 VAC, 50/60 Hz Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$175.86
Note: special order items require additional lead time. See our page on special order items.
P-T1629SEA Transformer - Hammond, Output, Single-Ended, 30 W, 6.5k Primary
Special Order Item
New and improved version, higher power handling smoother frequency response, easy to use secondary tap. Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type X" mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz.) Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations(M6) grain oriented silicon steel Core is gapped to reduce core saturation in Class-A circuits.
$193.01
Note: special order items require additional lead time. See our page on special order items.
P-T166L2 Transformer - Hammond, Filament, 2.5 VCT, 2.5 A
Special Order Item
Primary 115 VAC, 60 Hz.
Center tapped secondary.
Open style, channel bracket, two hole chassis mount.
Minimum 6 long leads.
Dual bobbin design - no electrostatic shield required.
Class B insulation (130 degreesC)
Hi-Pot test of 2000 V RMS.
UL listed (# E50394) & CSA certified (# LR3902).
Specifications
Rating: 2.5 VCT2.5 A
Mounting Centers: 2.38"u-bracket
Rating: 0.7 lbs
$25.00
Note: special order items require additional lead time. See our page on special order items.
P-T166RS Transformer - Hammond, Filament, 5 VCT, 8 A , 4.5" x 2.5" x 3"
Special Order Item
Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 5 VCT8 A Weight: 3.4 lbs Mounting Centers: 4"u-bracket
$36.37
Note: special order items require additional lead time. See our page on special order items.
P-T167L12 Transformer - Hammond, Filament, 12.6 VCT, 2.5 A
Special Order Item
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 12.6 VCT, 2.5 A
  • Mounting Centers: 1.5" x 1.56", vertical
Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$37.84
Note: special order items require additional lead time. See our page on special order items.
P-T167R5 Transformer - Hammond, Filament, 5 VCT, 8 A
Special Order Item
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 5 VCT, 8 A
  • Mounting Centers: 1.75" x 1.44", vertical
Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$49.34
Note: special order items require additional lead time. See our page on special order items.
P-T171A Transformer - Hammond, line isolation/plug & receptacle, 100VA
Special Order Item
100VA capacity. 89% full load efficiency, 0.21% harmonic distortion at full load. 15pF capacitance between windings at 1Khz. 1A circuit breaker.
$105.96
Note: special order items require additional lead time. See our page on special order items.
P-T182L6 Transformer - Hammond, Toroidal Power, Chassis Mount, 30VA
Special Order Item
Specifications
  • VA: 30
  • VAC Secondary (RMS) Series: 12V C.T. @ 2.5A
  • VAC Secondary (RMS) Parallel: 6V @ 5A

Features:
  • Dual Secondary
  • Open Toroid Center
  • Low profile, lightweight, cool running - due to high efficiency toroidal design
  • Dual 117/234 VAC primary, 50/60 Hz.
$68.17
Note: special order items require additional lead time. See our page on special order items.
P-T167L60 Power Transformer - Hammond, 115V, 60V/2A, 120VA
Special Order Item
  • Primary 115 VAC, 60 Hz.
  • 60 C.T. Secondary 2 Amps
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
$65.90
Note: special order items require additional lead time. See our page on special order items.
P-T850HA Audio Transformer - Hammond, 150/600Ω, Line Isolation
Special Order Item
  • 150/600 Ohm Primary Impedance
  • 300/1200 Ohm Secondary Impedance
  • Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware.
  • Sealed case and wax potted core internally for stable characteristics and long life.
  • Wide frequency response ± 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.)
  • Insertion loss of apx. 1 db.
  • Maximum power level +15 dbm. with specified characteristics, or higher levels with reduced low frequency performance.
  • Distortion is apx. 1.5% @ 20 Hz. under full power.
  • Electrostatic shield between pri. & sec. connected to the green lead.
  • Humbucking construction
  • Balanced split windings on pri. & sec. for circuit versatility. Primary may be used as a secondary and vice versa for impedance matching.
  • Lead length: Min. 4"
$146.22
Note: special order items require additional lead time. See our page on special order items.
P-T166F30 Power Transformer - Hammond, 30VAC, .25 Amp
Special Order Item
30VCT, .25 Amp. 2.375” Mounting centers (U-frame mounting). 115V primary, 60 Hz.
$25.00
Note: special order items require additional lead time. See our page on special order items.
P-T155B Filter Choke - Hammond, Open Bracket, 6 mH, 2 A
Special Order Item
  • Inductance: 6 mH
  • D.C. Current: 2 A
  • Resistance: 0.3 ohms
  • Maximum Operating Voltage: 400 V
  • Features
    • Economical "open bracket" - channel mount.
    • Tolerance of 15% on both inductance & resistance.
    • Inductances measured at rated D.C.
$16.43
Note: special order items require additional lead time. See our page on special order items.
P-T167G120 Transformer - Hammond, Filament, 120 VCT, 0.5 A
Special Order Item
Specifications
  • Primary: 115 VAC, 60 Hz
  • Secondary: 120 VCT, 0.5 A
  • Mounting Centers: 2" x 1.69", vertical

Key Features
  • Center tapped secondary
  • Enclosed, 4 hole chassis mount
  • Minimum 6" long leads
  • Dual bobbin design - no electrostatic shield required
  • Class B insulation (130 degrees, C)
  • Hi-Pot test of 2,000 V RMS
  • UL listed (# E50394) & CSA certified (# LR3902)
$52.73
Out of Stock
P-T1750F Transformer - Hammond, Output replacement for Fender, 15W 6950Ω
Special Order Item
Replacement for Blues Junior Equivalent to manufacturer part number #49969 Warning: Not all amplifier models of the same name use the same transformer model.
$47.16
Note: special order items require additional lead time. See our page on special order items.
P-T1750R Transformer - Hammond, Output for Yorkville/Traynor 100W
Special Order Item
Replacement for Yorkville/Traynor 100W General
Specifications
  • Power: 100 W
  • Primary Impedance: 2,000 Ω CT
  • Secondary Impedance: 4Ω, 8Ω, 16Ω
  • Coil Type: Paper
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$200.88
Note: special order items require additional lead time. See our page on special order items.
P-T1750X Transformer - Hammond, Output for Marshall, 100W 126, 500, 2kΩ
Special Order Item
Replacement for JCM900
Specifications
  • Primary: 126, 500, 2000Ω
  • Secondary: 2Ω, 4Ω, 8Ω, 16Ω
  • Power: 100 W
  • Amp Type: Push-Pull
Features:
  • >Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$146.22
Note: special order items require additional lead time. See our page on special order items.
P-T263AX Transformer - Hammond, Power, 100-0-100 V, 115 mA
Special Order Item
Specifications:
  • Size: 32 VA
  • Dual Primary: 115 VAC, 125 VAC, 60 Hz.
  • A.C. High Voltage Secondary RMS: 200V.C.T.
$62.32
Out of Stock
P-T273CZ Transformer - Hammond, Power, 325-0-325 V, 172 mA
Special Order Item
Specifications:
  • Size: 159 VA
  • Dual Primary: 117 VAC, 50/60 Hz.
  • A.C. High Voltage Secondary RMS: 650V.C.T. @ 172mA
  • Filament Winding #1: 5 V @ 3 A
  • Filament Winding #2: 6.3 V C.T.
$141.80
Note: special order items require additional lead time. See our page on special order items.
P-T290HX Transformer - Hammond, for Marshall JCM800, JMP-100W
Special Order Item
Replacement for Marshall JCM800 and JMP - 100 Watt
Primary: 120/220//240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$148.40
Note: special order items require additional lead time. See our page on special order items.
P-T290LX Transformer - Hammond, Classic replacement for Marshall JTM45
Special Order Item
Replacement for Marshall JTM 45
Primary: 120/240 VAC, 50/60 Hz
Features:
  • Designed for drop in replacement of original units.
  • Physically, parts were designed to look similar to original factory units (where possible).
  • Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
$195.26
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!