Transformers & Chokes

Open style, chassis mount transformers with a 117V 50/60Hz primary and a 25V secondary.

Secondary VAC: 10V C.T.
Current: 5 A
VA Rating: 50
Features:

• Single Primary 115VAC
• Operates on 50/60 Hz.
• Combination solder or quick connect terminals.
• Split bobbin construction eliminates the need for an electrostatic shield.
• Hi-pot tested to 2 KV RMS.
• Economical open style, channel frame - chassis mount design
• UL recognized & CSA certified.

Features:

• Small, economical, open, two hole horizontal bracket mount.
• Insulated, color coded flexible leads, 4" long minimum
• Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
• When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

Features:

• Small, economical, open, two hole horizontal bracket mount.
• Insulated, color coded flexible leads, 4" long minimum
• Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
• When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

Features:

• Small, economical, open, two hole horizontal bracket mount.
• Insulated, color coded flexible leads, 3" long minimum
• Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
• When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

Replacement for Fender Bandmaster, Dual Showman, Pro Reverb, Twin Super Equivalent to Manufacturer part number 125C1A & 022699 Specifications:

• Inductance ± 15%: 4 H
• D.C. Current: 90 mA

Features:

• Designed for drop in replacement of original units.
• Physically, parts were designed to look similar to original factory units (where possible).
• Inductances measured at rated D.C. current.
• Material used & design specs.

• Open style, chassis mount transformers with a 115V 60Hz primary and a 5V center tapped secondary.

• Open style, chassis mount transformers with a 115V 60Hz primary and a 50V center tapped secondary.

• Primary 115 VAC, 60 Hz.
• Secondary 30 C.T.
• Center tapped secondary.
• Open style, channel bracket, two hole chassis mount.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C).
• Hi-Pot test of 2,000 V RMS.
• UL listed (# E50394) & CSA certified (# LR3902).

Open style, chassis mount transformers with a 115V 60Hz primary and a 44V center tapped secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and an 8V or 8.5V secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and a 9V center tapped secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and a 7V or 7.5V secondary.

Features:

• Designed for drop in replacement of original units.
• Physically, parts were designed to look similar to original factory units (where possible).
• Inductances measured at rated D.C. current.
• Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".
• Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

16H @ 40 mA guitar amplifier replacement for Vox TB35C2 Tony Bruno. Physically, parts were designed to look similar to original factory units (where possible). Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

• Open style, chassis mount transformers with a 115V 60Hz primary and a 60V center tapped secondary.

Specifications:

• Size: 7 VA
• Dual Primary: 117 VAC, 234VAC, 50/60 Hz.
• Secondary VAC RMS Series: 14V @ 0.5 A
• Secondary VAC RMS Parallel: 7V @ 1 A

Features:

• Primary 117/234 VAC, 50/60 Hz.
• Dual secondaries
• Secondaries can be used as; a center tapped secondary, parallel connected or used individually
• Units are designed for use with all windings engaged.
• Open style.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees, C) for extra p

• Replacements for Fender Amps
• Designed for drop in replacement of original units.
• Physically, parts were designed to look similar to original factory units (where possible).
• Material used & design specs. were kept as close as possible to the original part to preserve the stock "tone".

Open style, chassis mount transformers with a 115V 60Hz primary and a 120V center tapped secondary.

Open style, chassis mount transformers with a 115V 60Hz primary and a 33V center tapped secondary.

Size: 48 VA
Secondary Series: 40V C.T. @ 1.2A
Secondary Parallel: 20V @ 2.4 A
Features:

• Low profile mounting, dual - split bobbin design.
• Low primary to secondary coupling, balanced windings, no electrostatic shield required and low EMF radiation due to semi-toroidal design.
• Universal dual primary 115/230V - 50/60 Hz.
• High insulation - Hipot of 1,750V RMS.
• Class B insulation - 130 degrees C.
• C UL US recognized.

Features:

• Small, economical, open, two hole horizontal bracket mount.
• Insulated, color coded flexible leads, 4" long minimum
• Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
• When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.

Part No. Applicaton Nominal Impedance (Ohms) Primary D.C. D.C.

Features:

• Perfect for audio input, line matching, isolation or output transformer applications.
• 2 watt (± 1.5 dB, 300 Hz. - 50 kHz.).
• Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187" length).
• Power level ratings are maximum at lowest frequency rating
• Power can be increased slightly at higher frequencies.
• Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.

Open style, chassis mount transformers with a 115V 60Hz primary and an 80V center tapped secondary.