Transformer - Hammond, Plate & Filament

Hammond
No image available

Transformer - Hammond, Plate & Filament

Starting at: $68.32
Save 11%
Originally: $76.76
In stock
  • Universal primary with taps for 100, 120, 220 or 240 VAC, 50 / 60 Hz. (Except the 260A6 which is 117V, ~\frac{50}{60}~ Hz only)
  • Designed for preamps, low power amps, general replacement, test equipment, etc.
  • Economical, open frame, chassis mount - two hole (.187 dia. = G) channel bracket (figure #1) or four hole mounting (figure #2).
  • Units include a Faraday shield between the primary and secondary windings. Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries.
  • Minimum 5" long leads.
  • For more selection check out our P-T300-X series of universal plate & filament transformers.

Notes:

  1. These units are designed to run with BOTH primary windings energized for maximum efficiency (see wiring table below).
  2. The Faraday shield lead - the gray wire - marked SH (shield), should remain grounded to the mounting bracket & in turn to the chassis.
Part No. VA A.C. High Voltage A.C. Filament A.C. Filament
Secondary #1 Secondary #2 Secondary #3
RMS RMS RMS
P-T260A 22 400V C.T. @ 40ma. 6.3V C.T. @ 1A -
P-T260C 65 500V C.T @ 85ma.. 5V @ 2A 6.3V C.T. @ 2A
P-T260E 80 450V C.T. @ 115ma. 5V @ 2A 6.3V C.T. @ 3A
Part No. Dimensions
A B C D E G
P-T260A 3.25 2.00 2.00 2.81 - 0.19
P-T260C 4.03 2.65 2.62 3.56 - 0.19
P-T260E 3.00 3.06 2.53 2.50 2.40 0.21 x 0.38
RoHS Compliant
SKU:
P-T260X
Item ID:
010315
Brand:
Hammond
Part Numbers
SecondaryOur Part NumberUPC/EAN
400 V C.T. @ 40 mAP-T260A623980008127
450 V C.T. @ 115 mAP-T260E623980008141
500 V C.T. @ 85 mAP-T260C623980008134
Product Measurements
Item Height400 V C.T. @ 40 mA version2.0 in.
450 V C.T. @ 115 mA version2.53 in.
500 V C.T. @ 85 mA version2.62 in.
Item Length400 V C.T. @ 40 mA version3.25 in.
450 V C.T. @ 115 mA version3.00 in.
500 V C.T. @ 85 mA version4.03 in.
Item Width400 V C.T. @ 40 mA version2.0 in.
450 V C.T. @ 115 mA version3.06 in.
500 V C.T. @ 85 mA version2.65 in.
Mounting Hole Center to Center A400 V C.T. @ 40 mA version2.81 in.
450 V C.T. @ 115 mA version2.50 in.
500 V C.T. @ 85 mA version3.56 in.
Mounting Hole Center to Center B450 V C.T. @ 115 mA version2.40 in.
Mounting Hole Diameter400 V C.T. @ 40 mA version0.19 in.
500 V C.T. @ 85 mA version0.19 in.
Mounting Hole Length450 V C.T. @ 115 mA version0.38 in.
Mounting Hole Width450 V C.T. @ 115 mA version0.21 in.
Primary100 / 120 / 220 / 240 VAC @ 50 / 60 Hz
Secondary 1400 V C.T. @ 40 mA version400 V C.T. @ 40 mA
450 V C.T. @ 115 mA version450 V C.T. @ 115 mA
500 V C.T. @ 85 mA version500 V C.T. @ 85 mA
Secondary 2400 V C.T. @ 40 mA version6.3 V C.T. @ 1 A
450 V C.T. @ 115 mA version5 V C.T. @ 2 A
500 V C.T. @ 85 mA version5 V C.T. @ 2 A
Secondary 3450 V C.T. @ 115 mA version6.3 V C.T. @ 3 A
500 V C.T. @ 85 mA version6.3 V C.T. @ 2 A
VA Rating400 V C.T. @ 40 mA version22
450 V C.T. @ 115 mA version80
500 V C.T. @ 85 mA version65
Packaging Information
Packaging Dimensions400 V C.T. @ 40 mA version1 in. × 1 in. × 1 in.
450 V C.T. @ 115 mA version3 in. × 3.06 in. × 2.53 in.
500 V C.T. @ 85 mA version4.03 in. × 2.65 in. × 2.62 in.
Weight (Packaging)400 V C.T. @ 40 mA version1.406 lbs.
450 V C.T. @ 115 mA version3.4 lbs.
500 V C.T. @ 85 mA version2.77 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet265.92 KB

Questions and Answers

No questions have been asked about this product.

Product Reviews

No product reviews yet! Be the first!
Don't see what you're looking for? Send us your product suggestions!