Products
No product page found for product tools.
Showing search results for tools
Showing results for tool. Search instead for tools
Alignment Tool - Zenith-Admiral Hex Wrench
GC Electronics 8606 alignment tool with hex and special tip slug. This tool is made of non-conductive Delrin.
- End 1 - 0.027 in.
- End 2 - 0.1 in.
- End 3 - 0.1 in.
$1.50
Multi-Tool - GrooveTech, for Guitar and Bass
The GrooveTech Guitar/Bass Multi-Tool has everything you need to give your guitar or bass a full setup—and it’ll all fit in your pocket or your gig bag. For truss rod adjustments, this multi-tool is equipped with three ball-end hex wrenches for standard nuts and a a 5/16” nut driver for Gibson-style nuts. Additional hex wrenches cover bridge and tremolo adjustments, and if you need to work on an instrument with vintage-style saddle screws, the 2.5mm slotted screwdriver is ready to go. Need to remove your pick guard or neck plate or put on a new set of Straplok® Strap Buttons? The two Phillips screwdrivers will take care of these and other needs. Finally, the ruler will help you check neck relief and string action.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.
$16.95
String Action Gauge - Measurement Tool
A stainless steel pocket-sized String Action Gauge that's perfect for obtaining quick and accurate action measurements for acoustic and electric instruments. A must have in a busy repair shop! Measurements taken using this gauge include:
Plus more! The back includes a useful fraction/metric/decimal conversion chart that saves you time. Available in metric or in imperial models (sold individually)
- Saddle height/slot depth
- String height
- Nut height/slot depth
- Pickup pole piece height/string to pole piece distance
- Fret slot depth(unbound fingerboards only)
Plus more! The back includes a useful fraction/metric/decimal conversion chart that saves you time. Available in metric or in imperial models (sold individually)
$13.95
Case Tools - Multi-Tool for USA Fender Guitars, Groovetech, 4-in-1
An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.
$11.95
Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
- Drill hole using #42 drill bit
- Insert eyelet
- Flip board over onto a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$14.95
Multi Tool - Dunlop, System 65, for guitar / bass work
The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.
$14.95
Aligner tool - GC Electronics, Duplex
Butyrate shaft 6-1/8" long with 1/8" wide steel tips. Tip on one end recessed.
- Material: Conductive Nylon Metal
- End: 1/8"
- End 2: 1/8"
$1.95
Guitar/Bass Multi-Tool - Mini-Multi, Groovetech, 14-in-1
This multi-tool has everything you need to make quick, gig-saving adjustments on the fly, featuring hex wrenches, screwdrivers, and a precision ruler for tremolo, action, pickup height, and other basic tweaks using both metric and imperial units. The GrooveTech Mini-Multi Guitar/Bass Multi-Tool is designed for all those on-the-fly adjustments you might need to make when it counts the most. It comes equipped with hex wrenches, screwdrivers, and a precision ruler so that you can quickly adjust your tremolo system, action, pickup height, and other basic functions. Oh, and it comes with a super-handy bottle opener for when you need to get to that refreshing beverage after the gig. Virtually all makes and models of guitars and basses are covered. Tools are pro-grade and absolutely dependable. Don’t head to the gig without a Mini-Multi Guitar/Bass Multi-Tool in your pocket. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.
$11.95
Precision Router Base - Support for Dremel Tool
A stable and versatile way to support your Dremel tool. This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
$49.95
Knife - Scraper tool, Retractable Blade
High Quality retractable scraper blade. House in a small but comfortably sized handle, the blade makes scraping a simple task.
- Scrape paint off, clean glass.
- Retractable locking blade.
- Includes 1 single-edge blade.
$5.95
Drum Key Multi-Tool - DK Multi, Groovetech, 4-in-1
The DK Multi Multi-Tool is a drum key made from pro-grade materials for exceptional durability with three metric-hex-wrench ends to cover pedal and other adjustments. The DK Drum Multi Multi-Tool is the sturdiest, handiest drum key you’ll ever buy. Made from pro-grade chrome vanadium steel, the centerpiece is a forged skeleton made to precision tolerances, ensuring exceptional durability and a proper fit. It comes wrapped in a polypropylene jacket for a comfortable feel. But that’s not all. We added three metric hex wrenches to cover the most common sizes found on drum hardware—especially pedals. Even with all of these features, the DK Multi Multi-Tool is about the same size as a standard drum key. This is likely to become your favorite. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.
$9.95
Drum Multi-Tool - Groovetech, 14-in-1
This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.
$16.95
Turrets - mounting, for use on 3mm boards
Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.
Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.99
package of 10
Nut - Dress Nut, For Mini Toggle Switches
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Colors Available:
Starting at $0.75
Turrets - mounting, for use on 2mm boards
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.
Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.93
package of 10
Fiberboard - Vulcanized, 3" x 15", .062" Thick
Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.
- .062" thick
- 3" x 15"
$2.65
Speaker - Jensen® Vintage Ceramic, 8", C8R, 25W
The C8R is the little gem in the Jensen Vintage series. It delivers a solid compact tone that defies its size. Extremely versatile, it finds application in small home and student amplifiers; but with a microphone in front, it is capable of transferring on tape some of the biggest tones ever. Not by chance, the vintage Fender® Champ® amplifiers produced with the C8R speaker are treasured by many players as a great studio tool.
$49.95
Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.25
Turrets - 0.172" Long, Brass, Premium, Package of 10
Hollow Turret Terminal,Brass, .172" Long, Premium.
- Finish/Plating: Tin
- For Panel Thickness: .125 [3.2]
- Material: Brass
- Mounting Hole: 0.116
- Terminal Length: 0.312
- Terminal Style: Tubular Turret
- Type: Solder Turret Terminal
- Package of 10
$4.95
package of 10
Turrets - Bifurcated, Brass, Premium, for use on 3mm boards
High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.
Stake and anvil required for mounting.
- Triple turret with slot
- 9.12mm height when installed
- 3.18mm diameter
- For 3.0mm to 3.2mm panel thickness
- Recommended for mounting holes sized 2.68mm to 2.78mm
- Bright 100% tin finish
- Knurled underside of shoulder to prevent rotation once swaged
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
$6.29
package of 10
Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
Connector - Quick Disconnect, .187”, Fully Insulated
Fully insulated quick disconnect connectors for use with spade lugs. These connectors are size .187” and fit wire gauges 16-22AWG. These connectors are simple to attach to speaker wires using a crimping tool such as S-T-CP412G.
$1.55
package of 10
Fret Rocker - for Identifying Uneven Frets
Fret rocker luthier tool. Four precision ground flat edges having lengths: 4.0”, 3.0”, 2.0” and 1.3”. Perfect for finding the source of fret buzz. Place the flat edge over three frets at a time and try to rock the tool. If the tool rocks, you’ve located the uneven fret.
$8.80
Turrets - Bifurcated, for use on 3mm boards
Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10