Tools

S-TGTBAS1 Bass Player Tech Kit - CruzTOOLS, GrooveTech
Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment.
$53.36
Save 11%
Originally: $59.95
S-TGTGTR1 Tech Kit - CruzTOOLS GrooveTech, for Guitar Player
Guitar players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a good setup will improve your performance. The GrooveTech provides everything you need to work on your guitar, plus an Easy Setup Guide that takes the mystery out of the process. Eleven hex keys are color-coded gold for metric and black for inch sizes, and long pattern for easy access. All truss rod sizes are ball end. Also included is a thickness gauge, ruler, capo, cutters, string winder, and 6-in-1 screwdriver.
$53.36
Save 11%
Originally: $59.95
S-T170M Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$10.24
Save 11%
Originally: $11.50
S-T1715 Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$8.86
Save 11%
Originally: $9.95
S-T806 The Nibbler - cutter for square holes
Instructions
  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.
$6.19
Save 11%
Originally: $6.95
S-TGTSC1 String Cutters - CruzTOOLS GrooveTech, for guitar and bass
CruzTOOLS developed the GrooveTech String Cutters specifically for Guitar and Bass strings. Guitar and bass strings are made of hardened stainless steel or nickel with thicknesses as high as 3mm. Ordinary diagonal cutters are designed for soft copper, and thus fail miserably when used on strings. GrooveTech String Cutters were developed specifically for this application, using a proprietary heat-treatment process. Despite its compact five-inch length, even “B” bass strings cut easily and your days of dented blades will be a thing of the past. Vinyl grips feel great in your hands.
$10.64
Save 11%
Originally: $11.95
S-TGTMLT1 Multi-Tool - CruzTOOLS GrooveTech, for Guitar and Bass
Introducing the second generation of the GrooveTech Guitar/Bass Multi-Tool Introduced in 2008, the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. In spite of market acceptance, CruzTOOLS designers envisioned improvements and spent over two years developing a second generation tool that boasts significant advances. Like the original tool, both inch and metric hex wrenches are provided with ball-ends for truss rod sizes. Tool components use professional S2 steel with an attractive polished-chrome finish. Second-generation improvements include a 5/16" socket for Gibson and similar truss rod nuts, addition of 5mm and 1/16" hex wrenches, and a precision ruler with inch and metric scales.
$14.20
Save 11%
Originally: $15.95
S-T42H Seizer forceps - Xcelite, 5.5" straight nose, serrated jaws
Seizer forceps. Product Features:
  • Versatile tool with unusual holding qualities
  • Clamps firmly to hold wires for soldering
  • Acts as a heat sink and retrieves small parts from hard-to-reach places
  • Precision-machined from perfectly tempered stainless steel
  • Box-joint construction
  • 3-position snap lock
  • Serrated jaws
$10.68
Save 11%
Originally: $12.00
S-TGTJPT1 Tool - Cruz Tools, GrooveTech Jack / Pot Tool
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.
$13.31
Save 11%
Originally: $14.95
S-TNN7776 Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
$28.44
Save 11%
Originally: $31.95
S-T378M Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
  • Thin profile, long reach pliers
  • For access into tight spaces
  • Lightweight for maximum comfort
  • For use in precision electronic assembly applications
  • Features serrated jaws
  • Features red grips
$16.55
Save 11%
Originally: $18.60
S-TMS543J Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
$26.66
Save 11%
Originally: $29.95
S-TCN255 Pliers - Xcelite, 60 degree curved nose
Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
Product Features:
  • Curved nose pliers
  • Thin tip
  • Features green cushion grips
  • Features serrated jaws
$29.33
Save 11%
Originally: $32.95
S-TXP600 Screwdriver Set - Xcelite, Precision, XP600, 6 pieces
Package of 6
Electrostatic Discharge Safe. Designed to maximize efficiency and production. Fast turning swivel cap with cavity provides precise centering. Constructed of superior strength materials. Product Features:
  • ESD safe to provide protection to ESD sensitive items
  • Chrome-molybdenum vanadium steel blades provide superior strength
  • Fast turning swivel caps provides optimum control for precise centering
  • Black oxide tips for longer wear life
  • No-roll handle design keeps drivers from rolling off uneven surfaces
  • Storage case provides a home and keeps drivers safe
$30.13
Save 11%
Originally: $33.85
S-TGTDKY1 T-Handle Drum Key - CruzTOOLS GrooveTech
The GrooveTech puts a new 'spin' on drum keys with a unique sliding 'T' handle that allows quick and easy changing of drum heads without power tools. The handle can be slid from one end to the other for extra leverage - especially useful for high-tension drum corps tuning. Fit and finish is top-drawer, using heat-treated chrome vanadium alloy with a polished chrome finish. The detachable ¼"' drive drum key socket is made to precise tolerances.
$14.20
Save 11%
Originally: $15.95
S-T100X Wire Stripper / Cutter - Xcelite, 5", with Cushion Grip Handle
5" wire stripper & cutter with cushion grip handles. Features:
  • Cuts and strips both solid and stranded wire cleanly, neatly.
  • Adjustable screw stop for different wire sizes.
  • Hardened with ground blades.
  • Red plastic-coated cushion grip provides maximum leverage.
$12.91
Save 11%
Originally: $14.50
S-T105SCGV Wire Stripper / Cutter - Xcelite, 6", with Spring and Lock
6" stripper, cutter with spring and lock, cushion grip handles, carded. Features
  • Wire cutting and stripping edges conveniently located in front of pivot
  • Allows use in tight places
  • Needle nose pliers add wire pulling and bending capabilities
  • Scissors-action stripper for cleaner, faster and more accurate stripping
  • Serrated edge
  • Includes work-speeding automatic spring and lock
  • Red cushion grip handle provides maximum leverage
  • For copper and aluminum wire 10-20 AWG
$20.43
Save 11%
Originally: $22.95
S-T703X Punch - Greenlee, Chassis, for punching round holes
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
Starting at $59.59
S-TGTAWX Wrench - Cruz Tools, Soundhole Truss Rod
Cruz Tools GrooveTech soundhole truss rod wrench for acoustic guitars. Acoustic guitar truss rods need adjustment just like electrics, but manufacturers sure don't make it easy. Access is typically through the sound hole, sometimes through a brace to an unseen nuts. These wrenches allow quick access to nuts on most makes and models of acoustics, with a precision ball-end tip for easy fit, extra length on both segments of the blade, and an oversized handle for confidence when making adjustments. Professional-grade.
$11.53
Save 11%
Originally: $12.95
S-TM60 Screwdriver Set - Xcelite, Mini, 6 pieces
Package of 6
6-Piece Mini-driver Kit. Features:
  • Miniature version of compact convertible set. for precise detail work.
  • Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
  • Molded in color-coded plastic handles.
  • Contains a black torque amplifier handle.
  • Furnished in see-through plastic case.
$20.43
Save 11%
Originally: $22.95
S-T252 Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
$14.20
Save 11%
Originally: $15.95
S-T258 Caliper - Digital, for Luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
$40.01
Save 11%
Originally: $44.95
S-TGTTRX Truss Rod Driver - Cruz Tools, GrooveTech
Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. Cruz Tools developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.
$10.64
Save 11%
Originally: $11.95
S-TCPS7 Springs - Xcelite, replacement for S-TCN255
Replacement spring for S-TCN255 (Xcelite curved nose pliers).
$0.89
Save 11%
Originally: $1.00
Don't see what you're looking for? Send us your product suggestions!