Tools
![StripBoard - Single Sided, 3.94” x 3.15”, Mounting Holes P-PC-ST2](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-st2_1.png?itok=ke0KZzmI)
ST2 StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. ST2 has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
- Standard stripboard pattern, with tracks running the length of the board.
- Single-sided high-quality FR4 glass-epoxy circuit board.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$4.75
![StripBoard - Single Sided, 6.30” x 3.94” P-PC-ST3U](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-st3u_1.png?itok=D42Kpkiu)
ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features
- Standard stripboard pattern, with tracks running the length of the board.
- Single-sided high-quality FR4 glass-epoxy circuit board.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
$8.75
![PadBoard - Single Sided, 3.04” x 1.55”, Vintage Spacing P-PC-PADD15-1-X](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-padd15-1_p-pc-padd15-1-blk_cards_1.png?itok=6-CT1caI)
Colors Available:
- High-quality 1.6mm FR4 glass-epoxy circuit board
- 1oz/ft2 copper weight
- HASL coated square shaped pads
- 20 x 10 holes
- 3.04” x 1.55”
$2.99
![BreadBoard - Solderless, 400 point pattern P-PC-BB400](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-bb4001_1.png?itok=SX61Qk6H)
Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.
$5.50
![StripBoard - Single Sided, 3.04” x 1.55”, 0.1” Spacing, Phenolic Board P-PC-STD1-1-BRN](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std1-1-brn_1.png?itok=mbi7MSXR)
Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features standard 0.1” (2.54mm) spacing. The board has a 30x15 grid (15 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each strip is gold coated making soldering easier than most protoboards and also ensures a long shelf life. Features:
- High-quality 1.6mm phenolic circuit board
- Gold coated strips
- 30 x 15 holes (15 strips)
- 3.04” x 1.55”
$2.75
![StripBoard - Single Sided, 3.15” x 1.97”, Mounting Holes P-PC-ST1](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-st1_main1_1.png?itok=WLpkghKG)
Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.
$3.09
![Standoff - M3 Threaded, Adhesive Backing S-H192-X](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/s-h192-10_1.png?itok=oY_rvS2X)
Adhesive backed standoff with M3 threading. The high-strength adhesive tape allows the standoff to be securely mounted, providing an easy option for mounting PCBs in enclosures. These standoffs use a captive metal nut in a strong nylon plastic base for a durable and lightweight solution.
$0.95
![Kit - BusBoard, Junior Genius Blinky Lights Kit K-JRG01-KIT](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/k-jrg01-kit_retail_box_0.png?itok=Jv3XkDH4)
Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.
$27.95
![StripBoard - Single Sided, 6.14” x 3.15”, Vintage Spacing, Black P-PC-STD15-2-BLK](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std15-2-blk_side_2_1.png?itok=vaU2uLgu)
Black stripboard featuring a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has 40 x 20 holes (20 strips). Each strip is HASL coated making soldering easier than most protoboards and also ensures a long shelf life. Features:
Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.
- High-quality 1.6mm FR4 glass-epoxy circuit board
- HASL coated strips
- 40 x 20 holes (20 strips)
- 6.14” x 3.15”
Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.
$6.49
![ProtoBoard - Fits 1590B, 1 sided, 2-hole strips P-PC-PR1590B](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/bps-pr1590b_top_1.png?itok=N4gDt7Vk)
Prototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190) Features:
- Single-sided high-quality FR4 glass-epoxy circuit board.
- Convenient 2-hole pattern provides an easy way to connect parts.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
- 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
- PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)
$3.59
![Standoffs - 0.18", plastic with adhesive backing S-H190](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/s-h190-8_indv_bgd.png?itok=W6Tdm8rr)
Low-profile adhesive standoffs with a 0.180" standoff height that securely attaches your PCB to a flat surface. The post inserts into a 0.125” mounting hole and includes a locking tab that secures the PCB when inserted. It can be used with 1/16” or 1/32” thick PCBs. The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the mounting hole is close to the PCB edge and the offset base provides a large sticking surface while permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when working with small enclosures. High-quality 3M™ brand double-sided tape secures the standoff to a flat surface. These standoffs are available in packs of 8, 24, or 100 pieces Features:
- Low profile 0.180" standoff height.
- Offset base allows use when holes are close to the PCB edge.
![Breadboard - Solderable PCB, 3.00” x 1.90” P-PC-SB400](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-sb400_1.png?itok=uXKAqe82)
The SB400 Solderable PCB BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. The SB400 has the same pattern and spacing as a standard 400 connection point BB400 solderless plug-in breadboard. It has a standard 5-hole strip for each IC pin, just like solderless breadboards plus 4 power rails. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The SB400 has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used. BPS prototyping boards use high-quality FR4 glass epoxy PCBs for long life, with an anti-tarnish protective coating for easy soldering.
$4.35
![PadBoard - Double Sided, Plated Holes, 3.94” x 3.15”, Mounting Holes P-PC-PAD2](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-pad2_1.png?itok=_4H_W_Nx)
The PadBoard-2 prototyping circuit board has a general purpose pad-per-hole pattern which is good for analog and digital use. It is a double-sided board with plated holes, which allows components to be soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. Features
- Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
- Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
- 31 x 39 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
- Size2 = 100 x 80mm (3.94 x 3.15in), 1/16" thick (1.6mm)
$5.95
![StripBoard - Single Sided, 3.04” x 1.55”, Vintage Spacing P-PC-STD15-1-X](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std15-1_p-pc-std15-1-blk_cards_1.png?itok=ZsyF5fCc)
Colors Available:
- High-quality 1.6mm FR4 glass-epoxy circuit board
- 1oz/ft2 copper weight
- HASL coated strips
- 20 x 10 holes (10 strips)
- 3.04” x 1.55”
$2.99
![StripBoard - Single Sided, 3.04” x 1.55”, 0.1” Spacing P-PC-STD1-1-X](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std1-1-blk_p-pc-std1-1-wht_group_0.png?itok=1z5w8p-u)
Colors Available:
- High-quality 1.6mm FR4 glass-epoxy circuit board
- 1oz/ft2 copper weight
- HASL coated strips
- 30 x 15 holes (15 strips)
- 3.04” x 1.55”
$2.95
![Breadboard - Solderable PCB, 3.75” x 1.85”, Mounting Holes P-PC-SB404](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-sb404_back1.png?itok=n3XlUoEM)
Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.
$4.75
![StripBoard - Single Sided, 3.04” x 1.55”, Vintage Spacing, Phenolic Board P-PC-STD15-1-BRN](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std15-1-brn_1.png?itok=hQ4_zQLK)
Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 20x10 grid (10 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each strip is gold coated making soldering easier than most protoboards and also ensures a long shelf life. Features:
- High-quality 1.6mm phenolic circuit board
- Gold coated strips
- 20 x 10 holes (10 strips)
- 3.04” x 1.55”
$2.95
![ZipWire - Jumper Cable Kit for circuits S-W604X](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/bps-kit-zw-10x3_spread1.png?itok=5UsGZXkA)
The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.
Starting at $9.85
package of 120
![StripBoard - Single Sided, 6.14” x 3.15”, Vintage Spacing, Phenolic Board P-PC-STD15-2-BRN](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-std15-2-brn_tsm_4.png?itok=VOdHCGlq)
Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 40 x 20 holes (20 strips). Each strip is surface treated making soldering easier than most protoboards and also ensures a long shelf life. Features: High-quality 1.6mm phenolic circuit board Corrosion resistant, surface treated copper strips 40 x 20 holes (20 strips) 6.14” x 3.15” Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.
$5.49
![ProtoBoard - Fits 1590BB, 1 sided, 2-hole strips P-PC-PR1590BB](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/bps-pr1590bb_top_1.png?itok=HpqqET-f)
Prototyping circuit board (PCB) designed to fit the Hammond 1590BB die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590BB enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190). Features:
- Single-sided high-quality FR4 glass-epoxy circuit board.
- Convenient 2-hole pattern provides an easy way to connect parts.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
- 0.042" holes are drilled on 0.1" (2.54mm) centers. 4 mounting holes.
- PCB Size 3.20 x 4.25 in (81.3 x 108.0 mm)
$5.75
![PadBoard - Double Sided, Plated Holes, 3.15” x 1.97” P-PC-PAD1](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/p-pc-pad11.png?itok=ncd9iS-o)
Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.
For fastening your project to a surface see our adhesive standoffs (S-H190)
Features:
For fastening your project to a surface see our adhesive standoffs (S-H190)
Features:
- Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
- Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
- 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
- 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
- Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)
$3.15
![Tool - IC Extractor / Puller S-T-IC-PULLER](https://www.amplifiedparts.com/sites/default/files/styles/uc_product_list/public/uc_products/s-t-ic-puller_0.png?itok=vRNqbbya)
Hand-held IC extractor for use on a variety of chip sizes. The metal ends hook beneath the chip. When a pinching force is applied to the bends of the plastic, the metal ends clamp onto the chip and pull upward uniformly to avoid bending pins. This tool can be used on widths of 7mm and up.
$3.99