Tools

This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.

An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.

The GrooveTech Guitar Player Tech Kit has everything you need to take care of your guitar with confidence, featuring top-shelf tools that have been optimized for just about every make and model of guitar. For your truss rod and string action adjustments, take your pick from the 11 color-coded hex wrenches—gold for metric, black for imperial. Truss rod sizes come with ball ends for hard-to-reach nuts. Check your neck relief with the capo and thickness gauge and your string action with the ruler. The 6-in-1 screwdriver, which comes with two Phillips bits, two slotted bits, and two nut drivers, allows for easy tightening or removal of various hardware pieces. Remove your strings in no time with the string cutters—they’ll cut through even bass strings with ease—and then string up again with a fast-action string winder. Tools are guaranteed with a limited lifetime warranty. Never worked on your instrument before?

Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.

The GrooveTech Guitar/Bass Multi-Tool has everything you need to give your guitar or bass a full setup—and it’ll all fit in your pocket or your gig bag. For truss rod adjustments, this multi-tool is equipped with three ball-end hex wrenches for standard nuts and a a 5/16” nut driver for Gibson-style nuts. Additional hex wrenches cover bridge and tremolo adjustments, and if you need to work on an instrument with vintage-style saddle screws, the 2.5mm slotted screwdriver is ready to go. Need to remove your pick guard or neck plate or put on a new set of Straplok® Strap Buttons? The two Phillips screwdrivers will take care of these and other needs. Finally, the ruler will help you check neck relief and string action.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.

This multi-tool has everything you need to make quick, gig-saving adjustments on the fly, featuring hex wrenches, screwdrivers, and a precision ruler for tremolo, action, pickup height, and other basic tweaks using both metric and imperial units. The GrooveTech Mini-Multi Guitar/Bass Multi-Tool is designed for all those on-the-fly adjustments you might need to make when it counts the most. It comes equipped with hex wrenches, screwdrivers, and a precision ruler so that you can quickly adjust your tremolo system, action, pickup height, and other basic functions. Oh, and it comes with a super-handy bottle opener for when you need to get to that refreshing beverage after the gig. Virtually all makes and models of guitars and basses are covered. Tools are pro-grade and absolutely dependable. Don’t head to the gig without a Mini-Multi Guitar/Bass Multi-Tool in your pocket. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.

GrooveTech developed the String Cutters specifically for Guitar and Bass strings. Guitar and bass strings are made of hardened stainless steel or nickel with thicknesses as high as 3mm. Ordinary diagonal cutters are designed for soft copper, and thus fail miserably when used on strings. GrooveTech String Cutters were developed specifically for this application, using a proprietary heat-treatment process. Despite its compact five-inch length, even “B” bass strings cut easily and your days of dented blades will be a thing of the past. Vinyl grips feel great in your hands.

Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. GrooveTech developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.

Multi-function mini heat gun with two speed/temperature settings. This small handheld heat gun is fast and easy to use with its lightweight build and comfortable grip. The nozzle is equipped with a safety shield and the built-in stand makes safely resting it on a table top simple when in use. Ideal for:

• Heat Shrink Tubing
• Embossing
• Drying Paint
• Drying Glue
• Drying Ink

Features:

• 350 Watt
• cULus approved compliance for both US & Canadian markets
• Ideal for heat shrink tubing
• 2 speed/temperature settings featuring quiet operation
• 482°F (Low) / 662°F (High)
• Fast and easy to use
• Comfortable and lightweight
• Safety shield on nozzle
• Built-in bracket for self-support and table top use
• Double insulated power cord

Magnifier with 2 ½" lens. Both clamps and magnifier can be removed. Great for precision work on circuit boards, solders and repairs. 6 ball joints for any angle. Simple to adjust thumb screws. Nickel plating fittings. Sturdy iron cast base. Alligator spring clips

Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.

High Quality retractable scraper blade. House in a small but comfortably sized handle, the blade makes scraping a simple task.

• Scrape paint off, clean glass.
• Retractable locking blade.
• Includes 1 single-edge blade.

Box cutter-style steel utility knife. This high quality, heavy-duty knife easily cuts tape, cartons, strapping and twine. Zinc die cast. Retractable with 3 blade-locking positions for safety. Includes three heavy-duty blades.

The X-ACTO #1 knife set is the classic X-Acto blade handle. The pointed tip of the sharp #11 blade allows for precise cutting. The #1 Knife is compatible with the 10, 12, 13, 16 and 17 X-Acto blades. Includes:

• X-Acto #1 Knife
• #11 blade
• Safety cap

6-Piece Mini-driver Kit. Features:

• Miniature version of compact convertible set. for precise detail work.
• Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
• Molded in color-coded plastic handles.
• Contains a black torque amplifier handle.
• Furnished in see-through plastic case.

1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.

Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).

Comfort grip marker with a soft, rubber handle for excellent grip and control. This fine tip permanent marker has low odor and is non-toxic. Instant-drying.

Medium tip paint marker. The black paint marker is suitable for both indoor and outdoor use. The oil-based paint leaves permanent marks.

Metal stamp set with 27 stamps for the letters A through Z and an ampersand. The height of the stamped letter is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.

Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.

• Relieved tapered head-flush cutter
• Allows use between closely spaced components
• Features blue cushion grips

MT1 - 0.031" / 0.8 mm Conical Tip For Weller SP23 / SP25 Series Irons. Package of 2

• Consumer tip series from Weller
• MT series tips are plated with Electroless Nickel for ease of wetting during soldering
• 10/24" Thread in tips for SP23 / SP25 series soldering irons

Simple and easy to use nut driving tool for the slotted nuts found on Qingpu jacks that are commonly used in Eurorack modules. The tool anchors into the sleeve of the jack ensuring no slippage when in use, protecting the faceplate from accidental damage. The two grip holes are cut to the size of M2.5 and M3 hex nuts and can be used in a pinch to tighten nuts of those sizes, or to hang your tool on a keyring! One side of the tool works with Mod "Top Brass" nuts and slotted W-QP-NUT-K nuts used on W-QP-518MA, W-QP-419GR, and W-QP-518MA-BM. The other side works with slotted W-QP-NUT-PJ-R nuts used on W-QP-PJ3410. Either side will work with Befaco Bananuts for 3.5mm jacks (W-BNUT-X). The nut driving tool is made of steel.