Tools

This 12 inch ruler is a durable straight edge for measuring, marking and cutting. Made of flexible stainless steel with non-slip cork back. Includes wear resistant etched markings in inches, cm and mm.
- 12" Stainless Steel Ruler
- Nearly indestructible, warp-free, bend-resistant stainless steel ruler
- Etched with 1/16 and metric markings to ensure easy readability
- Flexible for measuring curved surfaces
- Non slip cork backing
- Numerals and graduations are sharply delineated
- Attractive finish fits right into modern office environments
$8.50

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Max-Cure™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes.
$12.55

Krylon 9090 high strength spray adhesive. This fast-acting adhesive has a variable volume controlled web spray pattern that offers high contact strength.
For use on: Wood, Metal, Plastic, Glass, Paper, Papier-mâché, Plaster, Ceramic Application conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact finish Indoor/outdoor: Interior/Exterior
- Superior, permanent bond
- High contact strength
- Bonds heavy-duty materials like wood, metal, plastic, glass, laminate and more
- Dries in 30 minutes
For use on: Wood, Metal, Plastic, Glass, Paper, Papier-mâché, Plaster, Ceramic Application conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact finish Indoor/outdoor: Interior/Exterior
$16.95

High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.
Starting at $16.69

600 grit diamond-plated file. 3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.
$96.95

Package of 4
Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.- Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
- Gauge 3+4 has 14", 15", 16", and 20" radiuses
- Notched version great for taking measurements with strings on
- Set of 4
$29.95

Works like duct tape but leaves no residue. Used extensively in the entertainment industry. Can be used outdoors and tolerates UV rays. The matte finish back reduces light reflection. Gaff tape is easy to tear by hand. The temperature range is 40° to 200°F. Uses natural rubber adhesive. 29 oz./in. unwind adhesive.
$30.95

Comfort grip marker with a soft, rubber handle for excellent grip and control. This fine tip permanent marker has low odor and is non-toxic. Instant-drying.
$1.65

Blue outdoors painter's tape. Resists direct sunlight. Holds up to 14 days with clean removal. Recommended for detailed paint jobs.
$5.95

High quality, heavy duty work gloves great for drilling, sawing, chiseling, and any kind of machining. These gloves feature a reinforced double split leather on palm and index finger, leather knuckle strap, rubberized safety cuff, canvas back, pull tab at cuff. The reinforced leather offers reliable hand protection. The rubberized safety cuffs help protect wrists. The leather knuckle strap provides extra protection where you need it most. The comfortable canvas back is cool and allows greater flexibility.
$9.99

Angled nozzle attachments for the Atten ST-862D hot air station. These attachments are a great accessory allowing for a more relaxed grip and better control. Sold individually.
$5.55

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in many cases is an easier way to apply the CA. As long as brush is put back into the bottle after use, the bristles of the brush will not harden. Care must be taken, however, not to introduce foreign material into the bottle. The brush should not be used, for example, to apply CA to wood that has been freshly sanded. Plastic-Cure will also bond wood, but its brush applicator at times will not be the best way to apply it. Plastic-Cure is superior for the application of false nails and wraps on fingernails, where its brush is the preferred method of application. Uses
Directions: Carefully unscrew the cap.
- Plastics
- Wood
- Foam
- False nails and wraps on fingernails
Directions: Carefully unscrew the cap.
$8.45

Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.
$35.95

Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners. 7.8 mm inner diamter, 9.9 mm outer diameter.
$57.55

This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes
Includes
- 7.25"
- 9.5"
- 10"
- 12"
- 14"
- 16"
$16.00

Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. Begin by squeezing, then hold over the solder to be removed and release the bulb to allow the solder to be sucked into the bulb. This method of solder removal is very basic and inexpensive. The bulb takes up very little space in your tool kit. Made in Taiwan.
$23.75

The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.
$214.95

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.
Starting at $26.37

This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:
The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
- S-T235
- S-T256
The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
- Excellent control
- Easy installation
- Accurate freehand routing
Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).
$99.65

6" stripper, cutter with spring and lock, cushion grip handles, carded. Features
- Wire cutting and stripping edges conveniently located in front of pivot
- Allows use in tight places
- Needle nose pliers add wire pulling and bending capabilities
- Scissors-action stripper for cleaner, faster and more accurate stripping
- Serrated edge
- Includes work-speeding automatic spring and lock
- Red cushion grip handle provides maximum leverage
- For copper and aluminum wire 10 - 22 AWG
$30.39

Three neodymium magnets on each end to ensure a straight cut at a right angle. The saw guide can adjust 0mm to 4.7mm slot depth by sliding the frame. The slide frame side has scale marks representing 1mm of depth. For use with S-T254.
$93.25

75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.
Starting at $22.45