Tools

S-T259-A Fret Press - Handheld, 4 cauls
Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with radius inserts (S-T261) to press frets into guitar fret boards. This method is preferred by many as an alternative to hammering the frets in. Includes 4 interchangeable support cauls.
$109.95
S-T213-SET Nut File - Edge-Cut, for guitar, 10 sizes
Package of 10
Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
  • 4-1/2” cutting edge
  • Double sided (both sides are the same gauge)
  • Set of 10 files
  • Made In Japan

Set contains one of each size:
  • 0.010"
  • 0.013"
  • 0.016"
  • 0.024"
  • 0.028"
  • 0.032"
  • 0.036"
  • 0.042"
  • 0.046"
  • 0.056"
$119.95
S-T265 Fret Leveling File - Diamond, 600 grit, Wooden Grip
600 grit diamond fret leveling file used for leveling frets and beveling fret ends. Comfortable wooden handle.
$120.00
S-T262 Fret Slotting Miter Box - for guiding fret saws
Use this Fret Slotting Miter Box to accurately cut fret slots with a fretting handsaw. The ball-bearing guides make sawing easier and faster; they hold your fret saw perpendicular to the fingerboard and can be adjusted to match the blade precisely. You can quickly slot any board up to 3"" (76.2mm) wide, with adjustable depth of cut for any fret wire. You always have an unobstructed view of your work.
Made of rugged aluminum and 12" (304.8mm) long, this miter box has convenient mounting holes for firm attachment to your workbench, the mounting screws and spanners are included. Instructions also included.
$135.00
S-MAFGEN Generator - Lodestar, Audio Frequency
The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.
$169.95
S-MRFGEN Generator - Lodestar, RF Signal
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suited for checking and aligning the IF circuit and tuners in AM, FM, and TVs. 100 kHz to 150 MHz in 6 bands and up to 450 MHz on third harmonics.
Features:
  • Wide frequency range- 100 Khz to 150 MHz
  • With 1 KHz oscillator purpose of modulation
  • High Stability
  • Output control- 0dB/-20dB/-40dB and fine adjuster
  • Frequency accuracy + or - 5%
  • RF output- 100mV rms appx. (up to 35MHz unloaded)
  • Output control- High-low switch, fine adjust
  • Audio output 1 KHz min., 2V rms
  • Modulation: Internal: 1 KHz (AM) 30% appx., External: 50 Hz ~ 20 KHz at <1V rms input
$178.00
S-TBM4-X Bias Master™ - TAD, tube tester, with 4 probes
BIASMASTER System BM4 Measures BIAS current of the vacuum tubes in your amp. Includes 4 probes and english/german operation manual.
The BiasMaster™ allows you to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp, the Bias Master™ shows the actual result. This lets you set and evaluate the full reasonable biasing range your amp and tubes offer to find and set your personal perfect choice.
The Bias setting has a dramatic impact on the amp's response, break-up and dynamic character.















Probe Type Measures
Octal 6L6GC, 6550, EL34, 6V6GT, 5881, KT66, KT88, KT90, KT100, KT120, 7027A
Noval EL84 types

For additional probes (for testing other types of tubes), see S-TBMA2-X
$224.95
S-ZVT1000 Valve Tester - Orange, VT-1000
The compact and extremely easy to use VT1000 is a fully automatic valve tester, which performs a wide range of tests quickly and accurately. The benefits of using the VT1000 are clear and wide reaching; users can quickly and simply match and test valves, plus receive a reliable health check as to whether their valves are good, bad or worn.
Orange Amps developed the world's first fully automatic, portable, digital valve tester, the VT1000, to make it easy to test amp valves. Until now testing valves with little or no knowledge of valve theory was difficult, expensive and often unreliable.
$499.00
Don't see what you're looking for? Send us your product suggestions!