Fret Saw - Standard Model, for cutting fret slots
Standard fret slot cutting saw with 0.50/0.60 mm pitch. Made in Japan. Overall length = 324 mm (12 ¾”) Cutting Length = 115 mm (4 ½”) Blade Depth = 30 mm (1 3/16”)
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
- Measures fret height before AND after fret installation
- Accurate readouts in inches or millimeters
- A must for all precision guitar work
Magnetic Parts Tray - Dunlop, System 65
Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.
String Action Gauge - Dunlop, System 65
The Dunlop System 65 String Action Gauge is a precision measurement tool for setups and adjustments. The gauge includes both metric and imperial measurements on opposite sides.
Cutters - Xcelite, Relieved Tapered Head
- Relieved tapered head-flush cutter
- Allows use between closely spaced components
- Features blue cushion grips
Fret File - for Filing Fret Ends, pencil shape
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
Wire Stripper / Cutter - 8", 10-24 AWG
Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.
Neck Cradle - Dunlop, Maintenance Station
The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.
Wrench - Dunlop, System 65, Uni-wrench
The Dunlop System 65 Uni-Wrench is great tool for tightening and loosening any threaded nut on a guitar or bass. This includes pots, jacks, bridge posts, rounded knurled nuts on selector switches and more.
Truss Rod Driver - Cruz Tools, GrooveTech
Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. Cruz Tools developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.
Routing Jig - for Soundhole & Rosette
Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).
Fret Cutter - Carbon Steel, for Cutting Stainless Steel Fret Wire
High quality carbon steel fret cutters for use with stainless steel fret wire. These newly designed cutters improve accuracy providing a flatter cut than other versions. Additionally the blades are designed for improved durability. The cutters can also be locked in the closed position for protection when not in use.
Soldering iron tip - Weller, hollow core, 1.6mm, narrow screwdriver, ET Series
Genuine Weller narrow screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The narrow screwdriver style is great for soldering in hard to reach and narrow spots. These tips are an excellent choice for use with the S-TWE1010 soldering station.
- Sensor hole in the base of tip is fitted with a stainless steel liner
- Prevents the tip from seizing to the sensor
Soldering Iron - Weller SPG80L, 80 watts
The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:
- 900°F tip temperature suitable for chassis soldering and other heavy duty applications
- Indicator light to show when the iron is on
- 3/8” chisel tip
- 6 foot power cord
- Metal stand included
Generator - Lodestar, RF Signal generator
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suited for checking and aligning the IF circuit and tuners in AM, FM, and TVs. 100 kHz to 150 MHz in 6 bands and up to 450 MHz on third harmonics.
- Wide frequency range- 100 Khz to 150 MHz
- With 1 KHz oscillator purpose of modulation
- High Stability
- Output control- 0dB/-20dB/-40dB and fine adjuster
- Frequency accuracy + or - 5%
- RF output- 100mV rms appx. (up to 35MHz unloaded)
- Output control- High-low switch, fine adjust
- Audio output 1 KHz min., 2V rms
- Modulation: Internal: 1 KHz (AM) 30% appx., External: 50 Hz ~ 20 KHz at <1V rms input
Wire Stripper / Cutter - Xcelite, 5", with Cushion Grip Handle
5" wire stripper & cutter with cushion grip handles. Features:
- Cuts and strips both solid and stranded wire cleanly, neatly.
- Adjustable screw stop for different wire sizes.
- Hardened with ground blades.
- Red plastic-coated cushion grip provides maximum leverage.
- Strips 8AWG - 22AWG wire.
Solder - Kester 48, .031", Flux 66, Lead-free 1 lb Spool
Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66. Kester SAC305 48 Activated Rosin Flux for cored solder wire was developed for lead-free applications to enable soldering of most common metals.
Starting at $80.00
Pliers - Xcelite, 60 degree curved nose
Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
- Curved nose pliers
- Thin tip
- Features green cushion grips
- Features serrated jaws
Radius Gauges - Notched, stainless steel
Package of 4Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
- Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
- Gauge 3+4 has 14", 15", 16", and 20" radiuses
- Notched version great for taking measurements with strings on
- Set of 4
File - Diamond, for Frets, Straight
Double sided diamond fret file. Easily the best choice for fret crowning, diamond files cut in two directions (push and pull) rather than one with no chatter giving you a smoother fret after the crowning process File cutting surface is impregnated with diamonds to give you a smooth cut with long lasting durability.
- Made of solid steel with diamond cutting surface.
- Soft rubber coating on the handle
- 5-3/4” cutting surface
- Double sided to cover different fret sizes
T-Handle Drum Key - CruzTOOLS GrooveTech
The GrooveTech puts a new 'spin' on drum keys with a unique sliding 'T' handle that allows quick and easy changing of drum heads without power tools. The handle can be slid from one end to the other for extra leverage - especially useful for high-tension drum corps tuning. Fit and finish is top-drawer, using heat-treated chrome vanadium alloy with a polished chrome finish. The detachable ¼"' drive drum key socket is made to precise tolerances.
Cutters - Diagonal, With Lead Catcher
Diagonal cutters with an attachment for catching cut leads. This set of cutting pliers is made from high quality carbon steel with a hardened finish. The catcher can also be removed for use with vacuum attachments.
Wood Carving File - Half-Round, anti-clog
High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.
Starting at $21.50
Sanding - Diamond Sheet, 75x150mm, Self-Adhesive
75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.