Tools

S-T378M Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
  • Thin profile, long reach pliers
  • For access into tight spaces
  • Lightweight for maximum comfort
  • For use in precision electronic assembly applications
  • Features serrated jaws
  • Features red grips
$19.25
S-T7805 Bulb solder-off - Weller, for removing solder
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. Begin by squeezing, then hold over the solder to be removed and release the bulb to allow the solder to be sucked into the bulb. This method of solder removal is very basic and inexpensive. The bulb takes up very little space in your tool kit. Made in Taiwan.
$19.49
S-T225-XG Fret Hammer - Twin Heads, for delicate work
Precision luthier hammer with wooden handle. Dual sided head has a steel end and a plastic end to allow for delicate work. Can be used for applications such as ensuring a proper fret fitting.
Starting at $19.50
S-T203 String Spacing Ruler - Steel, for marking string locations
Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.
$19.95
S-T231-X Wood Carving File - Half-Round
High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.
Starting at $21.50
S-T-PICKPUNCH Guitar Pick Punch - For Making DIY Picks
This guitar pick punch is great for making your own guitar picks out of a wide variety of material. Two pick sheets are included but it is also great for making novelty picks out of old gift cards, IDs, credit cards, hotel key cards, and anything else you can think of.
This pick punch makes a great gift for any guitar player.
$21.99
S-T221-X Fret Slot Cleaning Saws - 45 degree, pencil grip
Fret slot cleaning saw with 45 degree angle and pencil grip.
$22.50
S-TM60 Screwdriver Set - Xcelite, Mini, 6 pieces
Package of 6
6-Piece Mini-driver Kit. Features:
  • Miniature version of compact convertible set. for precise detail work.
  • Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
  • Molded in color-coded plastic handles.
  • Contains a black torque amplifier handle.
  • Furnished in see-through plastic case.
$23.50
S-T246-X Sanding - Diamond Sheet, 75x150mm, Self-Adhesive
75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.
$23.95
K-JRG01-KIT Kit - BusBoard, Junior Genius Blinky Lights Kit
Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard. Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper. You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value. This next-generation science kit doesn’t seal the parts into simplified plastic blocks.
$23.95
S-T25-X Fret Saw - Standard Model, for cutting fret slots
Standard fret slot cutting saw with 0.50/0.60 mm pitch. Made in Japan. Overall length = 324 mm (12 ¾”) Cutting Length = 115 mm (4 ½”) Blade Depth = 30 mm (1 3/16”)
$24.95
S-TSP40L Soldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated
$25.95
S-T221-RYOBA-X Fret Slot Cleaning Saws - Ryoba, push / pull
Fret slot saw with two blades, one for push-cutting and another for pull-cutting.
$25.95
S-T300 Neck Cradle - Dunlop, Maintenance Station
The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.
$25.95
S-T105SCGV Wire Stripper / Cutter - Xcelite, 6", with Spring and Lock
6" stripper, cutter with spring and lock, cushion grip handles, carded. Features
  • Wire cutting and stripping edges conveniently located in front of pivot
  • Allows use in tight places
  • Needle nose pliers add wire pulling and bending capabilities
  • Scissors-action stripper for cleaner, faster and more accurate stripping
  • Serrated edge
  • Includes work-speeding automatic spring and lock
  • Red cushion grip handle provides maximum leverage
  • For copper and aluminum wire 10 - 22 AWG
$26.50
S-T214-X Fret Files - for Filing Fret Crowns
Solid steel crowning files with dual cutting edges for precision fret crowning. These should be in any luthier’s tool kit!
  • Made of solid steel
  • Soft rubber coating on the handle
  • Double sided (both sides are the same size)
  • 4-3/16” cutting surface
  • Available in three sizes to cover most fret sizes (small,medium,large)
Starting at $28.95
S-T7874B Desoldering Pump - Weller, manual, for removing solder
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.
$29.50
S-TMS543J Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
$29.95
S-T208 Notched Straightedge - 16.5" x 1.5", Stainless Steel, Satin
The notched straight edge is a must have on any luthier’s bench for evaluating the straightness of your fret board while avoiding frets that may have seen better days.It’s made of satin stainless steel so cleaning off any markings made with a pencil is a breeze!
One side is marked Long Scale Guitar for use with Fender, Martin, Gibson long scale guitars plus others.
The opposite side is marked Short Scale Guitar for use with Gibson’s shorter scale as well as Dobro and PRS guitars plus others.
$29.95
S-T238 Radius Gauges - Notched, stainless steel
Package of 4
Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
  • Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
  • Gauge 3+4 has 14", 15", 16", and 20" radiuses
  • Notched version great for taking measurements with strings on
  • Set of 4
$29.95
S-T9000X Solder - Kester, 60 / 40, 44 Flux, 1 lb spool
60/40 Rosin Core, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$31.95
S-T9005 Solder - Kester 63 / 37, 1 lb spool, 0.031" diameter
(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.
$31.95
S-TCN255 Pliers - Xcelite, 60 degree curved nose
Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
Product Features:
  • Curved nose pliers
  • Thin tip
  • Features green cushion grips
  • Features serrated jaws
$33.95
S-T215-X Fret File - for Filing Fret Ends, pencil shape
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
$34.25
Don't see what you're looking for? Send us your product suggestions!