Tools

S-TPSI10 Soldering Iron Tip - Weller, for PSI100, Hot Knife tip
Replacement hot knife tip (cat no. PSI 10) for Weller Portasol, butane soldering iron.
Cut and cauterize nylon ropes and synthetic upholstery materials easily. Adjustable temperatures up to 450°C (850°F) make it perfect for cutting and shaping plastics and model making.
$12.95
S-TGTTRX Tool - Cruz Tools, GrooveTech Truss Rod Driver, Standard/Cheater
Tool - Cruz Tools, GrooveTech Truss Rod Driver, Standard or Cheater
$11.95
S-ZVT1000 Valve Tester - Orange, VT-1000
The compact and extremely easy to use VT1000 is a fully automatic valve tester, which performs a wide range of tests quickly and accurately. The benefits of using the VT1000 are clear and wide reaching; users can quickly and simply match and test valves, plus receive a reliable health check as to whether their valves are good, bad or worn.
Orange Amps developed the world's first fully automatic, portable, digital valve tester, the VT1000, to make it easy to test amp valves. Until now testing valves with little or no knowledge of valve theory was difficult, expensive and often unreliable.
$499.00
S-T223 Fret Cutter - 190mm, for Trimming Fret Wire
Fret Cutters. Use to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions:
  • 190 mm total length
  • 27 mm jaw width
$37.95
S-T225-XG Fret Hammer - Twin Heads
115g or 225g precise luthier hammer. Can be used for applications such as ensuring a proper fret fitting.
Starting at $19.50
S-T212-C Nut Files - Double Edge, for Classical Guitars, 3 Sizes
Package of 3
Double edge nut files featuring popular classical guitar gauges specially designed for slotting nuts. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
  • 4” cutting edge
  • 6 gauges: .030" / .038"- .032" / .042"- .035" / .046"
  • Set of 3 files
  • Made In Japan
$62.95
S-T215-X Fret File - for Filing Fret Ends
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
$34.25
S-T224-SET Wrench Set - Boxed Set, 78 Pieces
Package of 78
Total 78pcs per box. Include : 12pcs each of 1.27mm, 1.5mm, 2.0mm, 2.5mm and 6pcs each of 3.0mm, 4.0mm, 5.0mm, 7.0mm, 8.0mm
$67.95
S-T218-SET File Set - for Nut And Saddle Shaping
Package of 3
Set of files for control over shaping nuts and saddles.
$57.00
S-T219-SF File Set - Standard Super Fine, 5 Types
Package of 5
Super fine set of files for ultra-fine file work. Swiss Model. 200 mm in length Includes:
  • (1) flat
  • (1) half round
  • (1) round
  • (1) square
  • (1) three square (i.e. triangular)
$52.25
S-T219-F File Set - Standard Fine, 5 Types
Package of 5
Set of fine files for precise file work, 2nd cut. Made in Japan. 190 mm in length. Includes:
  • (1) flat
  • (1) half round
  • (1) round
  • (1) square
  • (1) three square (i.e. triangular)
$33.35
S-T219-D File Set - Standard Diamond, 5 Types
Package of 5
Set of diamond files for file work with extremely hard materials. 140 mm in length. Includes:
  • (1) flat
  • (1) half round
  • (1) round
  • (1) square
  • (1) three square (i.e. triangular)
$15.20
S-T221-X Fret Slot Cleaning Saws - Standard
Fret slot cleaning saw with 45 degree angle and pencil grip.
Starting at $16.00
S-T300 Neck Cradle - Dunlop, Maintenance Station
The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.
$25.95
S-T230-X Chemical Polishing File - Flat
CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.
Starting at $18.15
S-T231-X Chemical Polishing File - Half-Round
CP files have special file toothpattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.
Starting at $21.50
S-T233-7086 Two-Step Drill Bit - 7.0mm (0.275") x 8.6mm (0.34")
Two-step drill bit for drilling two-step holes. HSS material.
$69.95
S-T233-7899 Two-Step Drill Bit - 7.8mm (0.307") x 9.9mm (0.39")
Two-step drill bit for drilling two-step holes. HSS material.
$69.95
S-TCPS7 Springs - Xcelite, replacement for S-TCN255
Replacement spring for S-TCN255 (Xcelite curved nose pliers).
$1.00
S-TMT1 Tip - Weller, Replacement for SP23 and SP23D
Package of 2
MT1 - 0.031" / 0.8 mm Conical Tip For Weller SP23 / SP25 Series Irons. Package of 2
  • Consumer tip series from Weller
  • MT series tips are plated with Electroless Nickel for ease of wetting during soldering
  • 10/24" Thread in tips for SP23 / SP25 series soldering irons
$7.95
S-T236 Fret File - #600, 3-in-1 Diamond, for Crowns
3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.
$104.95
S-T238 Radius Gauges - Notched
Package of 4
Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench.
Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
  • Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
  • Gauge 3+4 has 14", 15", 16", and 20" radiuses
  • Notched version great for taking measurements with strings on
  • Set of 4
$29.95
S-TGTAWX Wrench - Cruz Tools, Soundhole Truss Rod
Cruz Tools GrooveTech soundhole truss rod wrench for acoustic guitars
• Allows easy adjustment of truss rods without loosening strings
• Ball-end tip for easy fit
• Large handle provides confident grip
• Pro-grade
$12.95
S-T239 Fret Saw Guide - for Ensuring Straight Cuts
Three neodymium magnets on each end to ensure a straight cut at a right angle. The saw guide can adjust 0mm to 4.7mm slot depth by sliding the frame. The slide frame side has scale marks representing 1mm of depth. Size is 195 x 90 x 25 mm. Weight is 475g.
$81.95
Don't see what you're looking for? Send us your product suggestions!