Tools

S-Z3220 Digital Multimeter - YF-3220, multi-purpose
Ergonomically designed. Uses one 9V battery, included.
  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case
$49.95
S-TGTDKMT1 Drum Key Multi-Tool - DK Multi, Groovetech, 4-in-1
The DK Multi Multi-Tool is a drum key made from pro-grade materials for exceptional durability with three metric-hex-wrench ends to cover pedal and other adjustments. The DK Drum Multi Multi-Tool is the sturdiest, handiest drum key you’ll ever buy. Made from pro-grade chrome vanadium steel, the centerpiece is a forged skeleton made to precision tolerances, ensuring exceptional durability and a proper fit. It comes wrapped in a polypropylene jacket for a comfortable feel. But that’s not all. We added three metric hex wrenches to cover the most common sizes found on drum hardware—especially pedals. Even with all of these features, the DK Multi Multi-Tool is about the same size as a standard drum key. This is likely to become your favorite. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.
$9.95
S-TGTDMT1 Drum Multi-Tool - Groovetech, 14-in-1
This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.
$16.95
S-T207 Feeler Gauge - 20 Sizes, for measuring gaps / clearance
This precise set of 20 feeler gauges in the luthier's workshop can perform a wide variety of functions to measuring with string action to measuring the correct nut slot depths, fret slot width, string to fret clearances, and other hardware installation work, these ground steel feeler gauges are marked in both metric and imperial measurements for easy use.
$8.30
package of 20
S-T264 File - Diamond, for Frets, Straight
Double sided diamond fret file. Easily the best choice for fret crowning, diamond files cut in two directions (push and pull) rather than one with no chatter giving you a smoother fret after the crowning process File cutting surface is impregnated with diamonds to give you a smooth cut with long lasting durability.
  • Made of solid steel with diamond cutting surface.
  • Soft rubber coating on the handle
  • 5-3/4” cutting surface
  • Double sided to cover different fret sizes
$62.95
S-T414-X File - Fret Crowning, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.
  • Hard chrome coated
  • Single cut files
  • Coarse and fine included on each file
  • Medium file has a radius of 2mm
  • Jumbo file has a radius of 3mm
$45.95
S-T416 File - Fret Levelling, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.
  • Hard chrome coated
  • Two sided
  • 6.25” x 1” x 0.225”
$39.95
S-T218-SET File Set - for Nut And Saddle Shaping
Set of files for control over shaping nuts and saddles.
  • Half-round shape
  • Flat shape
  • Triangle shape
$54.95
package of 3
S-T219-X File Set - Needle files, 5 types, for precision work
Set of files for precision work.
Includes:
  • flat
  • half round
  • round
  • square
  • three square (i.e. triangular)
Starting at $11.95
package of 5
S-TWSA350F Filters - Weller, for bench top smoke absorber
For replacement of the filters used in the benchtop smoke absorber S-TWSA350. Package of 3
  • Carbon Activated Filters
  • Removes flux fumes from soldering workbench
  • Replacement for WSA350 Benchtop Smoke Absorber
$12.65
package of 3
S-T205 Fingerboard Guards - 2 Sizes, for protecting frets
Designed to protect the fingerboard when doing work on your frets. These shields are indispensable when doing any sort of fret work. Being only .010” thick they can bend to accommodate and fingerboard radius. Made of 304 spring stainless steel.
Comes with 2 sizes: 3-1/8" x 7/8" x .010" - 1/4 inch protection on either side of the fret, 3-1/8"" x 0.59" x .010"" - 3/8 inch protection on either side of the fret
$4.30
package of 2
S-T306 Flashlight - Dunlop, System 65 gig, adjustable brightness
The Dunlop System 65 Gig Light is a high lumen, road ready flashlight. At 3.7” in length it easily fits in a gig bag or pocket and can be safely secured with its metal belt clip. This flash light has three different modes that can be accessed by lightly tapping the power switch: high beam, low beam, and strobe. The beam can also be focused by adjusting the lens providing up to 100 yards of visible light with a tight focus. This waterproof flashlight runs on a single AA battery which is included.
$11.99
S-T210-X Fret / Fingerboard Leveler - for checking frets
Fast, accurate leveling tools for the pro shop. This heavyweight steel tube is precision-ground for flatness on the narrow sides. Attach abrasive to quickly level frets or unfretted fingerboards.
Each heavyweight rectangular 1" x 2" steel tube is precision-ground for flatness on two opposite sides. The tool's edges are smooth to prevent gouging.
Starting at $11.95
S-T257 Fret Bender - for creating radius in or flattening Fret Wire
Multi-functional Fret Bender - bend or staighten either bulk fretwire or pre-cut short piece fret wire precisely and quickly! For bending fret wire, crank a length of fretwire through the fret bender, and it comes out curved and ready to install in a radiused fretboard. Get a perfect bend on enough wire for a whole guitar in just seconds. Precisely radiused fretwire makes your fretwork fast, accurate, and professional.
Can be mounted to a workbench by using the two 5/16” bolt holes.
$69.95
S-T310 Fret Collars - Dunlop, System 65, for fret polish without taping
The Dunlop System 65 Fret Collars include everything you need for a quick fret polish without the need for taping the entire neck. Two sizes of flexible steel collars are included, 0.125 and .080.
$21.99
package of 2
S-T223 Fret Cutter - 190mm, for Trimming Fret Wire
Fret Cutters. Use to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions:
  • 190 mm total length
  • 27 mm jaw width
$38.95
S-T268 Fret Cutter - Carbon Steel, for Cutting Stainless Steel Fret Wire
High quality carbon steel fret cutters for use with stainless steel fret wire. These newly designed cutters improve accuracy providing a flatter cut than other versions. Additionally the blades are designed for improved durability. The cutters can also be locked in the closed position for protection when not in use.
$39.95
S-T236 Fret File - 600 grit, 3 radiuses, diamond, for Crowns
600 grit diamond-plated file. 3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.
$96.95
S-T211-X Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
$66.95
S-T215-X Fret File - for Filing Fret Ends, pencil shape
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
$31.95
S-T216 Fret File - for leveling across multiple frets
For filing straight across multiple frets to ensure that they are level.
$17.75
S-T415-X Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
$46.95
S-T214-X Fret Files - for Filing Fret Crowns
Solid steel crowning files with dual cutting edges for precision fret crowning. These should be in any luthier’s tool kit!
  • Made of solid steel
  • Soft rubber coating on the handle
  • Double sided (both sides are the same size)
  • 4-3/16” cutting surface
  • Available in three sizes to cover most fret sizes (small,medium,large)
$29.95
S-T225-XG Fret Hammer - Twin Heads, for delicate work
Precision luthier hammer with wooden handle. Dual sided head has a steel end and a plastic end to allow for delicate work. Can be used for applications such as ensuring a proper fret fitting.
Starting at $19.50
Don't see what you're looking for? Send us your product suggestions!