Tools

Make your frets shine with this fret polishing rubber. Erases fine scratches and marks. Set of 2. Because of the softness of the rubber, the polisher fits to fret arch perfectly and keeps the fingerboard damage to a minimum. Easy to cut for delicate fret work. This is a great rust remover and polisher!
Available in 1000 (tan), 400 (red), or 180 (blue) grit.

Solid, high quality stainless steel radius gauges. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench.

• Gauge 1 has 7.25", 9.5", 10", and 12" radiuses
• Gauge 2 has 14", 15", 16", and 20" radiuses
• Set of 2

Our low profile aluminum understring radius gauges have a precision radiused top and bottom for accurate measurement. The slim shape allows you to take measurements of several radii without removing the strings on your guitar.

• Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge. The bottom radius can also be used to set pickup polepiece height to the string radius.
• Use the top radius of this gauge to determine the proper height adjustment for the bridge saddles.
• The following gauges are included in this set: 7.25" 9.5" 10" 12" 14" 15" 16" 17" 20"

High quality made in Japan flat chisels for luthier work. These chisels have a blade hardness of HRC63 and a total length of 225mm. The hardwood handle features a flat end for hammering,

A stainless steel pocket-sized String Action Gauge that's perfect for obtaining quick and accurate action measurements for acoustic and electric instruments. A must have in a busy repair shop! Measurements taken using this gauge include:

• Saddle height/slot depth
• String height
• Nut height/slot depth
• Pickup pole piece height/string to pole piece distance
• Fret slot depth(unbound fingerboards only)

Plus more! The back includes a useful fraction/metric/decimal conversion chart that saves you time. Available in metric or in imperial models (sold individually)

The contact surface of this solid brass tool fits over the crown of a fret and reseats loose fret ends without unstringing the instrument. Place the end of the tool on the crown of the fret and tap with a hammer. Also works well for pressing loose fret ends down while supergluing.

Two-way sanding block for radius fretboard sanding. There are two different radiuses on each block. Sandpaper not included.

High quality wood carving files with a special toothpattern designed to avoid clogs and self-clean as you file. These files are available in three different lengths to meet the needs of any project and feature a half round shape.

Work on your guitars without the worry of scratching the finish. This thick neoprene mat measures 17 7/8” x 23 ¾”. The tight webbing on the surface ensures no marring and helps keep debris from sticking to the mat.

CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.

For filing straight across multiple frets to ensure that they are level.

This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes

• 7.25"
• 9.5"
• 10"
• 12"
• 14"
• 16"

Precision luthier hammer with wooden handle. Dual sided head has a steel end and a plastic end to allow for delicate work. Can be used for applications such as ensuring a proper fret fitting.

Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.

Wood rasp - one coarse side for heavy work and one fine side for detailed work

75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.

Standard fret slot cutting saw with 0.50/0.60 mm pitch. Made in Japan. Overall length = 324 mm (12 ¾”) Cutting Length = 115 mm (4 ½”) Blade Depth = 30 mm (1 3/16”)

Solid steel crowning files with dual cutting edges for precision fret crowning. These should be in any luthier’s tool kit!

• Made of solid steel
• Soft rubber coating on the handle
• Double sided (both sides are the same size)
• 4-3/16” cutting surface
• Available in three sizes to cover most fret sizes (small,medium,large)

The notched straight edge is a must have on any luthier’s bench for evaluating the straightness of your fret board while avoiding frets that may have seen better days.It’s made of satin stainless steel so cleaning off any markings made with a pencil is a breeze!
One side is marked Long Scale Guitar for use with Fender, Martin, Gibson long scale guitars plus others.
The opposite side is marked Short Scale Guitar for use with Gibson’s shorter scale as well as Dobro and PRS guitars plus others.

Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.

• Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
• Gauge 3+4 has 14", 15", 16", and 20" radiuses
• Notched version great for taking measurements with strings on
• Set of 4

The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.

Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.

Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8” shank. (Includes 2.5 mm hex key).
Used with radius inserts (S-T261) to press frets into guitar fret boards.