Tools

S-Z3220 Digital Multimeter - YF-3220, multi-purpose
Ergonomically designed. Uses one 9V battery, included.
  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case
$49.95
S-TSPG80L Soldering Iron - Weller SPG80L, 80 watts
The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:
  • 900°F tip temperature suitable for chassis soldering and other heavy duty applications
  • Indicator light to show when the iron is on
  • 3/8” chisel tip
  • 6 foot power cord
  • Metal stand included
$49.95
S-Z150 Digital Capacitance Meter - YF-150, 9 ranges
Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.
  • 0.1 pf to 20,000 μF, 9 ranges
  • Over range indicator
  • 0.5% basic accuracy
  • Tilt stand
  • 3-1/2 digit LCD, 1" h x 2-¼" w
  • 1.5" x 2.8" x 6"
  • Zero adjustment
  • Input protected
  • Low battery indicator
  • Includes case, leads, battery, spare fuse and instructions
$49.95
S-T9000X Solder - Kester, 60 / 40, 44 Flux, 1 lb spool
60/40 Rosin Core, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.
Starting at $49.95
S-ST-1016 Bench-top Smoke Absorber - Atten, ST-1016, For Soldering
Atten ST-1016 benchtop fume extractor with LED light. This smoke absorber can be operated vertically or horizontally for more focused extraction based on positioning. The filter is made of highly activated carbon for better absorption. The fan provides a steady pull ensuring that all fumes pass through the filter when used properly. The optional light can provide additional lighting on the soldering surface. Carbon filter included. Specifications:
  • Air volume (vertical): 1.03 m³/min
  • Air volume (horizontal): 0.4 m³/min0.4
  • Air flow (vertical): 1.0 m/s
  • Air flow (horizontal): 2.6 m/s
$49.95
S-T235 Precision Router Base - Support for Dremel Tool
A stable and versatile way to support your Dremel tool. This precision router base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.
$49.95
S-TXP600 Screwdriver Set - Xcelite, Precision, XP600, 6 pieces
Electrostatic Discharge Safe. Designed to maximize efficiency and production. Fast turning swivel cap with cavity provides precise centering. Constructed of superior strength materials. Product Features:
  • ESD safe to provide protection to ESD sensitive items
  • Chrome-molybdenum vanadium steel blades provide superior strength
  • Fast turning swivel caps provides optimum control for precise centering
  • Black oxide tips for longer wear life
  • No-roll handle design keeps drivers from rolling off uneven surfaces
  • Storage case provides a home and keeps drivers safe
$49.95
package of 6
S-T415-X Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
$46.95
S-ST-2090D Soldering Iron - Atten, ST-2090D, 80W, Adjustable Temp., Digital Display
High quality digitally controlled soldering iron from Atten. The ST-2090D is a 80W benchtop soldering iron with a ton of features packed into its small package. This powerful iron features accurate and adjustable temperature control along and is compatible with a wide variety of tip options. This iron has a built-in dry tip cleaner and an attachable solder spool stand. Conical tip included. Features
  • Digital led display
  • Combined soldering station with soldering iron and solder wire holder.
  • MCU controlled temperature calibration with PID system equipped
  • Adjust temperature by knob button, easy to operate.
  • The handle structure is ergonomically designed for comfortable grip.
  • The heating wire and sensor are made of PTC material, which is quick in temperature rise and precise in temperature control.
  • Auto-standby, auto-shut down is available.
$45.95
S-T414-X File - Fret Crowning, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.
  • Hard chrome coated
  • Single cut files
  • Coarse and fine included on each file
  • Medium file has a radius of 2mm
  • Jumbo file has a radius of 3mm
$45.95
S-T258 Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
$44.95
S-TCN255 Pliers - Xcelite, 60 degree curved nose
Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
Product Features:
  • Curved nose pliers
  • Thin tip
  • Features green cushion grips
  • Features serrated jaws
$40.69
S-T416 File - Fret Levelling, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.
  • Hard chrome coated
  • Two sided
  • 6.25” x 1” x 0.225”
$39.95
S-T268 Fret Cutter - Carbon Steel, for Cutting Stainless Steel Fret Wire
High quality carbon steel fret cutters for use with stainless steel fret wire. These newly designed cutters improve accuracy providing a flatter cut than other versions. Additionally the blades are designed for improved durability. The cutters can also be locked in the closed position for protection when not in use.
$39.95
S-T223 Fret Cutter - 190mm, for Trimming Fret Wire
Fret Cutters. Use to trim the ends of new fret wire close to the fingerboard without leaving marks. Made in Japan. Dimensions:
  • 190 mm total length
  • 27 mm jaw width
$38.95
S-TNN7776 Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
$38.79
S-T263 Knob & Bushing Puller - for Easy Removal From Guitar
The Knob and Bushing Puller's clear acrylic housing has a rubberized base to help protect the guitar's finish. The square unit has 2 ends- one end for pulling knobs, the other end can work with the attached hardware to easily extract Gibson, Schaller or Gotoh bridge and tailpiece stud bushings, without damaging the guitar Includes 6 bolts and 2 flat washers for pulling various bushing threads:
  • 5/16-20
  • 5/16-24
  • 5/16-18
  • 10-32
  • M5
  • M6
  • M8

Roughly 0.065" clearance between the bottom of the knob and the top of the guitar required for knob puller attachment.
$37.00
S-T-MCHISEL-1D1 Chisel - Flat, Japanese, Micro, 1.1mm
Small flat chisel with an offset handle allowing this tool to easily get into tight spaces for luthier work. The 1.1mm blade is made of high quality HSS steel and is perfect when precision is required for nut slots and elsewhere. Made in Japan.
$35.95
S-THG-300D Tool - ECG, HG-300D Mini Heat Gun
Multi-function mini heat gun with two speed/temperature settings. This small handheld heat gun is fast and easy to use with its lightweight build and comfortable grip. The nozzle is equipped with a safety shield and the built-in stand makes safely resting it on a table top simple when in use. Ideal for:
  • Heat Shrink Tubing
  • Embossing
  • Drying Paint
  • Drying Glue
  • Drying Ink

Features:
  • 350 Watt
  • cULus approved compliance for both US & Canadian markets
  • Ideal for heat shrink tubing
  • 2 speed/temperature settings featuring quiet operation
  • 482°F (Low) / 662°F (High)
  • Fast and easy to use
  • Comfortable and lightweight
  • Safety shield on nozzle
  • Built-in bracket for self-support and table top use
  • Double insulated power cord
$35.95
S-TMS543J Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
$35.60
S-T7874B Desoldering Pump - Weller, manual, for removing solder
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.
$35.49
S-T260 Fret Press Caul - Converts Drill Press to Fret Press
Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8” shank. (Includes 2.5 mm hex key).
Used with radius inserts (S-T261) to press frets into guitar fret boards.
$34.95
S-F316X Tolex Glue - Brush-on adhesive for applying tolex
Brush-on adhesive ideal for applying tolex. Cleans up with soap and water. No nasty solvents required. Does not stretch or shrink the vinyl. Comes in quarts or gallons. Specifications: Tolex Glue is a non-flammable, Neoprene based, water borne adhesive formulated to bond tolex and vinyl to wood and wood based substrates. Min. use temp: 45°F Freezes at 32°F and lower Shelf Life: 6 Months Directions: Surfaces to be bonded must be clean. Apply a very thin coat to both surfaces. Very porous surfaces may require more than one coat. Second coat should not be applied until first has dried. Allow to 'flash off' for 20-30 minutes. Cloudy areas indicate incomplete drying. This time can be shortened with forced air and/or heat. Position pieces carefully prior to bringing surfaces together as bond is made instantly.
Starting at $32.95
S-T215-X Fret File - for Filing Fret Ends, pencil shape
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
$31.95
Don't see what you're looking for? Send us your product suggestions!