Tools

S-T414-X File - Fret Crowning, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.
  • Hard chrome coated
  • Single cut files
  • Coarse and fine included on each file
  • Medium file has a radius of 2mm
  • Jumbo file has a radius of 3mm
$45.95
S-T416 File - Fret Levelling, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.
  • Hard chrome coated
  • Two sided
  • 6.25” x 1” x 0.225”
$39.95
S-TMS-DIGIT-1 Metal Stamp Set - 0-9 Digits, 0.125” Numeral Height
Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
$6.50
S-TMS-ALPHA-1 Metal Stamp Set - A-Z Alphabet, 0.125” Letter Height
Metal stamp set with 27 stamps for the letters A through Z and an ampersand. The height of the stamped letter is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
$13.95
On Backorder
S-T415-X Fret File - Fret Dressing File, Hard Chrome Coated, for Stainless Steel Fretwire
Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.
  • Size Medium = 2mm radius for medium frets.
  • Size Jumbo = 3mm radius for jumbo frets.
$46.95
S-T225-XG Fret Hammer - Twin Heads, for delicate work
Precision luthier hammer with wooden handle. Dual sided head has a steel end and a plastic end to allow for delicate work. Can be used for applications such as ensuring a proper fret fitting.
Starting at $19.50
S-T303 Guitar Setup Mat - Dunlop, System 65
Work on your guitars without the worry of scratching the finish. This thick neoprene mat measures 17 7/8” x 23 ¾”. The tight webbing on the surface ensures no marring and helps keep debris from sticking to the mat.
$16.99
S-JQ-050 Hot Glue Gun - Atten, JQ-050, 50W
Atten JQ-050 50W hot glue gun. This glue gun is a great tool for diy projects of all kinds. With 50W of power and a fast heat time, using the gun is quick and easy. This glue gun uses 7mm glue sticks.
  • Rapid heating for quick use
  • Smooth glue delivery
  • Simple and convenient use
  • Suitable for DIY toys assembly, handmade items, repairs and more
$11.95
S-TM60 Screwdriver Set - Xcelite, Mini, 6 pieces
6-Piece Mini-driver Kit. Features:
  • Miniature version of compact convertible set. for precise detail work.
  • Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
  • Molded in color-coded plastic handles.
  • Contains a black torque amplifier handle.
  • Furnished in see-through plastic case.
$27.95
package of 6
S-T256 Routing Jig - for Soundhole & Rosette
Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).
$54.95
S-T-PK366D Desoldering Pump - Manual, for removing solder
Handheld desoldering pump for solder removal. The enhanced dual spring-loaded piston creates a powerful vacuum for easy removal of molten solder. The static free tip is self cleaning and made from a clog resistant material. The aluminum body is lightweight and durable.
$16.95
S-TRULE-SS Ruler - 12 Inch, Stainless Steel, Etched
This 12 inch ruler is a durable straight edge for measuring, marking and cutting. Made of flexible stainless steel with non-slip cork back. Includes wear resistant etched markings in inches, cm and mm.
  • 12" Stainless Steel Ruler
  • Nearly indestructible, warp-free, bend-resistant stainless steel ruler
  • Etched with 1/16 and metric markings to ensure easy readability
  • Flexible for measuring curved surfaces
  • Non slip cork backing
  • Numerals and graduations are sharply delineated
  • Attractive finish fits right into modern office environments
$8.50
S-TWLTS-X Soldering Iron Tip - Weller, solid core, screwdriver type, ST Series, 3-Pack
Genuine Weller screw driver (chisel) style tips for use with all ST Series compatible soldering irons. The screwdriver style is great for soldering through hole components and many other situations. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-TWLC100 soldering station. Sold in a pack of three. ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WLIR60, WLIR60K, WP25, WP30, WP35, WLC100 series tools.
Starting at $16.95
package of 3
S-CTO-15 Tool Oil - for Maintenance & Work
Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.
$5.50
S-T5000 Jumper Test Lead Set - Clip 35mm, Total Length 24", 22AWG
Set of 10 Jumper Test Leads " Alligator Clips 35mm each. Total Length 24", 22AWG wire. Black, Red, White, Yellow, Green
$4.99
package of 10
S-TCPS7 Springs - Xcelite, replacement for S-TCN255
Replacement spring for S-TCN255 (Xcelite curved nose pliers).
$1.00
S-T-MAGNETIZER Tool - Magnetizer / Demagnetizer
Small magnetizer / demagnetizer for use with hand tools. Simply pass a tool such as a screwdriver through the square hole to magnetize the tool and pass it through the u-shaped channel to demagnetize the tool. Note: When passing through the square cutout to magnetize a tool, be sure to keep the tool from touching the four walls of the magnetizer to ensure a proper magnetization. When using the demagnetizer, the tool can touch the plastic of the channel.
$3.99
S-TPMAT-1 Tape - Painter’s, Outdoor, Blue, 1⁄2" x 60 yds
Blue outdoors painter's tape. Resists direct sunlight. Holds up to 14 days with clean removal. Recommended for detailed paint jobs.
$6.25
S-T8454 Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$8.45
package of 6
P-PC-PR1590B ProtoBoard - Fits 1590B, 1 sided, 2-hole strips
Prototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190) Features:
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • Convenient 2-hole pattern provides an easy way to connect parts.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
  • 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
  • PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)
$3.59
S-T213-SET Nut File - Edge-Cut, for guitar, 10 sizes
Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
  • 4-1/2” cutting edge
  • Double sided (both sides are the same gauge)
  • Set of 10 files
  • Made In Japan

Set contains one of each size:
  • 0.010"
  • 0.013"
  • 0.016"
  • 0.024"
  • 0.028"
  • 0.032"
  • 0.036"
  • 0.042"
  • 0.046"
  • 0.056"
$120.70
package of 10
S-T267 Radius Gauge - stainless steel, 6 radius measurements
This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes
  • 7.25"
  • 9.5"
  • 10"
  • 12"
  • 14"
  • 16"
$17.95
S-AT-FJ1 Tool - Antistatic Wrist Strap
Antistatic wrist strap with a banana plug connector and alligator clip attachment providing a variety of attachment options. This wrist strap is a great tool for handling static sensitive components. Features
  • Strong anti-static properties
  • High safety performance
  • Lightweight thermoplastic construction
  • Thin and soft elastic wrist band for a comfortable fit
  • Wrist band can detach from cable
$2.99
S-TNN7776 Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
$38.79
Don't see what you're looking for? Send us your product suggestions!