Tools

S-T1715 Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$10.45
S-T170M Cutters - Xcelite, Shearcutter, General Purpose
5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:
  • Low profile, general-purpose cutter
  • Superior blade by-pass shear cutting action
  • Better cuts with half the effort
  • Greatly reduced mechanical shock delivered to the work
  • Features red grips
  • Flush cuts soft wire up to 20 AWG (0.8mm)
$14.35
S-T806 The Nibbler - cutter for square holes
Instructions
  • Simply drill 3/8" hole insert cutting head and compress handles.
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc.
  1. Material to be nibbled is placed in the gap between the punch and blade channel.
  2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
  3. A scribe line can be followed by looking down on work in this position.
$6.95
S-T8454 Alignment Kit - GC Electronics, for color TVs
Package of 6
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$7.95
S-TGTJPT1 Tool - Cruz Tools, GrooveTech Jack / Pot Tool
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.
$14.95
On Backorder
S-T42H Seizer forceps - Xcelite, 5.5" straight nose, serrated jaws
Seizer forceps. Product Features:
  • Versatile tool with unusual holding qualities
  • Clamps firmly to hold wires for soldering
  • Acts as a heat sink and retrieves small parts from hard-to-reach places
  • Precision-machined from perfectly tempered stainless steel
  • Box-joint construction
  • 3-position snap lock
  • Serrated jaws
$14.95
S-T-SPRINGPUNCH Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
$6.45
S-T-STAKE-SET Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
$12.50
S-T378M Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
  • Thin profile, long reach pliers
  • For access into tight spaces
  • Lightweight for maximum comfort
  • For use in precision electronic assembly applications
  • Features serrated jaws
  • Features red grips
$19.75
S-TGTMLT1 Multi-Tool - CruzTOOLS GrooveTech, for Guitar and Bass
Introducing the second generation of the GrooveTech Guitar/Bass Multi-Tool Introduced in 2008, the original GrooveTech Multi-Tool was an instant hit with guitar and bass players alike. Never before had a multi-tool provided such functionality or made use of pro-grade components. In spite of market acceptance, CruzTOOLS designers envisioned improvements and spent over two years developing a second generation tool that boasts significant advances. Like the original tool, both inch and metric hex wrenches are provided with ball-ends for truss rod sizes. Tool components use professional S2 steel with an attractive polished-chrome finish. Second-generation improvements include a 5/16" socket for Gibson and similar truss rod nuts, addition of 5mm and 1/16" hex wrenches, and a precision ruler with inch and metric scales.
$15.95
S-T-PK366D Desoldering Pump - Manual, for removing solder
Handheld desoldering pump for solder removal. The enhanced dual spring-loaded piston creates a powerful vacuum for easy removal of molten solder. The static free tip is self cleaning and made from a clog resistant material. The aluminum body is lightweight and durable.
$16.95
S-TGTSC1 String Cutters - CruzTOOLS GrooveTech, for guitar and bass
CruzTOOLS developed the GrooveTech String Cutters specifically for Guitar and Bass strings. Guitar and bass strings are made of hardened stainless steel or nickel with thicknesses as high as 3mm. Ordinary diagonal cutters are designed for soft copper, and thus fail miserably when used on strings. GrooveTech String Cutters were developed specifically for this application, using a proprietary heat-treatment process. Despite its compact five-inch length, even “B” bass strings cut easily and your days of dented blades will be a thing of the past. Vinyl grips feel great in your hands.
$11.95
S-F316-BRUSH Brush - Flat Chip, 2”, 1500, applicator
2 inch flat chip brush great for applying tolex glue or any other purposes. This brush features a 4.75 inch wood handle.
$2.25
S-T1714 Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$13.95
S-TCPS7 Springs - Xcelite, replacement for S-TCN255
Replacement spring for S-TCN255 (Xcelite curved nose pliers).
$1.00
S-T252 Guitar Nut Cube - for adjusting guitar nuts
Unique tool for the easy removal and adjustment of potentiometers and switches from guitars
$15.95
S-TNN7776 Needle Nose Pliers - Xcelite, 6", long
Extra long nose, Serrated jaws, Green cushion grips Product Features:
  • Long needle nose pliers
  • Extra long nose
  • Features serrated jaws
  • Features green cushion grips
$38.45
S-T211-X Fret File - Diamond, offset, for dressing and shaping frets
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
Starting at $66.95
S-TGTAWX Wrench - Cruz Tools, Soundhole Truss Rod
Cruz Tools GrooveTech soundhole truss rod wrench for acoustic guitars. Acoustic guitar truss rods need adjustment just like electrics, but manufacturers sure don't make it easy. Access is typically through the sound hole, sometimes through a brace to an unseen nuts. These wrenches allow quick access to nuts on most makes and models of acoustics, with a precision ball-end tip for easy fit, extra length on both segments of the blade, and an oversized handle for confidence when making adjustments. Professional-grade.
$12.95
S-TMS543J Cutters - Xcelite, Relieved Tapered Head
  • Relieved tapered head-flush cutter
  • Allows use between closely spaced components
  • Features blue cushion grips
$32.95
S-T258 Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
  • Measures fret height before AND after fret installation
  • Accurate readouts in inches or millimeters
  • A must for all precision guitar work
$44.95
S-T-CP412G Wire Stripper / Cutter - 8", 10-24 AWG
Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.
$15.95
S-TGTTRX Truss Rod Driver - Cruz Tools, GrooveTech
Vintage-style truss rod nuts have long, thin slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. Cruz Tools developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver™ allows quick minor adjustment without removing the neck. Both have oversized handles with extra-long shafts for a firm grip and easy access.
$11.95
S-T100X Wire Stripper / Cutter - Xcelite, 5", with Cushion Grip Handle
5" wire stripper & cutter with cushion grip handles. Features:
  • Cuts and strips both solid and stranded wire cleanly, neatly.
  • Adjustable screw stop for different wire sizes.
  • Hardened with ground blades.
  • Red plastic-coated cushion grip provides maximum leverage.
  • Strips 8AWG - 22AWG wire.
$16.50
Don't see what you're looking for? Send us your product suggestions!