Tilt Back Leg Kit - Fender

Fender
Pictured: 14"
Pictured: 14"
Pictured: 14"
Pictured: 14"
Pictured: 19"
Pictured: 19"
Click to zoom in
Tilt Back Leg Kit - Fender image 1Tilt Back Leg Kit - Fender image 2Tilt Back Leg Kit - Fender image 3
Customer Images:
No Images yet! Submit a product image below!

Tilt Back Leg Kit - Fender

Starting at: $39.50
Package of 2
Sold as a package of 2
In stock

If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!

  • BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
  • Comes with mounting hardware

Fender part number: 099-0713-000

Fender part number: 099-0712-000

Fender part number: 099-0714-000

SKU:
P-H265X
Item ID:
002476
Brand:
Fender
Part Numbers
LengthOur Part NumberUPC/EAN
14"P-H265S885978001477
16"P-H265M717669449339
19"P-H265L717669449346
Product Measurements
Item Length14" version14 in.
16" version16 in.
19" version19 in.
Packaging Information
Packaging Dimensions14" version17.5 in. × 5 in. × 0.7 in.
16" version19.8 in. × 5 in. × 0.7 in.
19" version22.5 in. × 5 in. × 1 in.
Weight (Packaging)14" version1.506 lbs.
16" version1.752 lbs.
19" version2.022 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on December 28th, 2016.
Matt H
December 28th, 2016
We only have these parts as a kit.
Anonymous
December 19th, 2017
I bet you could get away with using a bass string retainer, in place of the missing parts.
Anonymous
February 9th, 2019
is it the same part ( tilt abck leg stop and string guide)?
BradWbr
February 12th, 2019
Staff Member
They are very similar, but slightly different. The major issue being that the bass string retainer uses a smaller diameter of screw and with the larger screw being used in the leg stop, we would not advise using a bass string retainer as a replacement.
Asked by Anonymous on February 9th, 2017.
Matt H
February 9th, 2017
No, these only come with the legs and mounting hardware.
Anonymous
September 12th, 2017
iN REGARD TO THE TILT BACK LEGS, WHEN YOU HAVE NO HARD WARE FOR THEM MEANING THE NUTS AND THE WASHERS AND NUTS YOU WILL FIND THEM AT HARD WARE SHOPS OR ON LINE NOW THE TWO STOPS AS YOU REFERRED TO THEM AS ShowI have all the pieces of the kit except the ear type pieces that kinda look like large strap buttons for guitar, that the legs actually rest on when leaned back. Can I purchase 2 of those separately? you can use the string tree off a fender bass they look identical but I can't remember if the hole was the same size but that would not matter as you would just drill the correct size hole anyway study one of the pictures to see how many washers you need to go with them cheers terry
Asked by Anonymous on November 13th, 2015.
JustinG
November 17th, 2015
Staff Member
Top Contributor
Both legs and mounting hardware are included.
Asked by Jose Lopez on June 15th, 2016.
Matt H
June 15th, 2016
No, these only come with the legs and mounting hardware.
Asked by Anonymous on November 27th, 2016.
Matt H
December 2nd, 2016
Hi, the 19" legs are typically used on 4x10 cabs.
Asked by Anonymous on December 2nd, 2016.
Matt H
December 2nd, 2016
This is a new product.
Asked by Anonymous on December 2nd, 2016.
Matt H
December 2nd, 2016
The proper legs for your amp should be 14".
Asked by Anonymous on December 2nd, 2016.
Matt H
December 2nd, 2016
From doing a quick internet search, it seems that the 16" legs should work for your amp. To connect your head to your cab piggyback style you need the following part: S-H252, S-H253, and S-H251.
Asked by andretenenbaum on January 22nd, 2017.
Matt H
January 25th, 2017
Yes, you will need to drill holes into the sides of your amp to install these tilt back legs. You may need to remove the chassis to do this properly. Since some of the parts in the chassis contain lethal voltage, you need to use extreme caution. If you have any doubts about you ability to drain the lethal voltage from your amp please consult a qualified tech.
Asked by Anonymous on June 4th, 2018.
BradWbr
June 8th, 2018
Staff Member
The 14" legs are the ideal size for small amps, but the Princeton 112 did not have these installed when manufactured, so additional holes would need to be drilled into the cabinet for installation.
Asked by Anonymous on June 22nd, 2018.
Matt H
June 22nd, 2018
The 16" legs are often used on 2x12 amps like the Twin Reverb. The 19" legs would be seen on 4x10 amps such as the Super Reverb.
Asked by Anonymous on June 30th, 2018.
Matt H
July 2nd, 2018
The 14" legs are traditionally used on 2x10's and should work on a 1x12 combo.
Asked by Anonymous on September 24th, 2018.
BradWbr
September 24th, 2018
Staff Member
These tilt back leg kits include everything needed to install them on your amp.
Asked by Anonymous on October 16th, 2018.
BradWbr
October 16th, 2018
Staff Member
Given that the 14" legs are the smallest option available, it would be the logical choice, but since Princetons are not equipped with tilt-back legs from the manufacturer, we can not advise. There may be information available on forums or you may want to consult a professional amp tech.
Asked by Anonymous on November 3rd, 2018.
BradWbr
November 6th, 2018
Staff Member
It is two for each leg (One inside the cab and one outside) and one for the stopper.
Asked by Anonymous on November 6th, 2018.
BradWbr
November 6th, 2018
Staff Member
The included hardware in not available outside of this kit at this time.
Asked by Anonymous on February 5th, 2019.
BradWbr
February 6th, 2019
Staff Member
We do not have sufficient information to verify these will work in those amps. We suggest consulting a local professional repair tech and they may be able to confirm if you plan is possible.
Asked by Anonymous on March 1st, 2019.
BradWbr
March 1st, 2019
Staff Member
We do not have sizing info for the amp in question. You will need to measure your amp and make the determination or consult a professional repair tech for their suggestion.
Asked by Anonymous on March 11th, 2019.
BradWbr
March 11th, 2019
Staff Member
It appears these amps used the 16" legs.
Asked by Anonymous on March 15th, 2019.
BradWbr
March 15th, 2019
Staff Member
With the amp's 18 1/2" height, you would want the 16" legs. Keep in mind, additional holes will need to be drilled in your cabinet.

Product Reviews

No product reviews yet! Be the first!
Don't see what you're looking for? Send us your product suggestions!