Terminal Boards & Strips

S-T1714 Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$12.56
Save 10%
Originally: $13.95
S-HEYE-B Eyelets - Plated Brass, Small, .089” x .125” x .150”
Package of 10
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.72
Save 10%
Originally: $0.80
P-H219 Board - Marshall, Replacement for JCM 2000 DSL 100
Replacement board for Marshall JCM 2000 DSL 100
$220.50
Save 10%
Originally: $245.00
On Backorder
P-0501H01 Terminal Strip - 5 Lug, 1st Lug Common, Horizontal, package of 5
Package of 5
Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground first lug common
$4.46
Save 10%
Originally: $4.95
P-0501H05 Terminal Strip - 5 Lug, 5th Lug Common, Horizontal, package of 5
Package of 5
Standard size terminal strips, 1/16 thick bake lite tin plated steel solder lugs and brackets on 3/8" centers. 5 lug 1 ground fifth lug common.
$4.50
Save 10%
Originally: $5.00
P-0601H02 Terminal Strip - 6 Lug, 2nd Lug Common, Horizontal, package of 5
Package of 5
Standard size terminal strips, 1/16 thick bakelitetin plated steel solder lugs and brackets on 3/8" centers. 6 lug, 1 ground. Second lug common.
$4.28
Save 10%
Originally: $4.75
P-HTUR-STRIP-9 Turret Strip - 95mm x15.875mm , loaded with 9 turrets
Turret strip, with 9 turrets. Measures 95mm x 15.875mm.
$3.31
Save 10%
Originally: $3.68
P-HTUR-STRIP-6 Turret Strip - 67mm x15.875mm , loaded with 6 turrets
Turret strip, with 6 turrets. Measures 67mm x 15.875mm.
$2.92
Save 10%
Originally: $3.24
P-HTUR-STRIP-12 Turret Strip - 77mm x 32mm , loaded with 12 turrets
Turret strip, with 12 turrets. Measures 77mm x 32mm.
$4.39
Save 10%
Originally: $4.88
P-H217 PCB - Marshall, Valve PCB TSL100 / TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20. Marshall Part: M-TL10-60-02-01
$212.63
Save 10%
Originally: $236.25
On Backorder
S-H11X Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.35
Save 10%
Originally: $1.50
S-HEYE-A Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
$0.72
Save 10%
Originally: $0.80
S-HTUR-AX Turrets - mounting, for use on 2mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-BX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.69
Save 10%
Originally: $1.88
S-HTUR-BX Turrets - mounting, for use on 3mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 3mm thick, such as P-HTUR-C or P-HTUR-B. For 2mm boards, see S-HTUR-AX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.69
Save 10%
Originally: $1.88
S-T1715 Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$8.96
Save 10%
Originally: $9.95
P-TB8-1-2 Terminal Board - one 8 Pin socket, 2 x 6 lugs
Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.
$17.06
Save 10%
Originally: $18.95
P-TB8-2-2 Terminal Board - two 8 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$30.56
Save 10%
Originally: $33.95
P-TB9-1-3 Terminal Board - one 9 Pin socket, 3 x 6 lugs
Single socket. 3 rows/6 lugs per row, 6 mounting holes. Board dimensions 3 ¾" x 3". Terminals are not pre-wired.
$21.83
Save 10%
Originally: $24.25
P-TB9-2-2 Terminal Board - two 9 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
$24.75
Save 10%
Originally: $27.50
P-TB9-2-3 Terminal Board - two 9 Pin sockets, 3 x 10 lugs
Dual socket. 3 rows/10 lugs per row, 4 mounting holes. Board dimensions 5 ½" x 3 ¾". Terminals are not pre-wired.
$31.46
Save 10%
Originally: $34.95
P-TB9-3-2 Terminal Board - three 9 Pin sockets, 2 x 14 lugs
Three socket. 2 rows/ 14 lugs per row, 6 mounting holes. Board dimensions 6 ¾" x 3". Terminals are not pre-wired. The distance between tube socket centers is 2.18".
$36.23
Save 10%
Originally: $40.25
P-TB9-MK3 Terminal Board - two 9 Pin sockets, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
$23.18
Save 10%
Originally: $25.75
P-TC4-1 Terminal Strip - Ceramic, 1 row, 4 slots, 2.5mm thread
Ceramic terminal strip, 1 row, 4 slots, 2.5mm thread.
$2.92
Save 10%
Originally: $3.24
P-TS12-1 Terminal Strip - 1 row, 12 turrets per row
1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".
$7.16
Save 10%
Originally: $7.95
Don't see what you're looking for? Send us your product suggestions!