1. Home
  2. Products
  3. Terminal Boards & Strips

Terminal Boards & Strips

products per page
P-H219 Board - Marshall, Replacement for JCM 2000 DSL 100
Replacement board for Marshall JCM 2000 DSL 100
$245.00
P-H217 PCB - Marshall, Valve PCB TSL100 / TSL122, Rev 20
Marshall PC Board for TSL 100 / 122. Rev 20. Marshall Part: M-TL10-60-02-01
$236.25
K-704 Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$52.95
P-ECB-25 PC Board - Dunlop, replacement for Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
$22.95
S-T1714 Staking Tool - For Small Eyelets
Staking tool for small eyelets such as S-HEYE-B. Directions:
  • Drill hole using #42 drill bit
  • Insert eyelet
  • Flip board over onto a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$13.95
S-T1717 Tool - Anvil for Turret Terminals, .750 L
Turret anvil for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For staking tool see S-T1715
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$10.95
S-T1715 Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-AX, S-HTUR-BX, S-HTUR-P).
For anvil see S-T1717
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
S-HTUR-P Turrets - 0.172" Long, Brass, Premium, Package of 10
Package of 10
Hollow Turret Terminal,Brass, .172" Long, Premium.
  • Finish/Plating: Tin
  • For Panel Thickness: .125 [3.2]
  • Material: Brass
  • Mounting Hole: 0.116
  • Terminal Length: 0.312
  • Terminal Style: Tubular Turret
  • Type: Solder Turret Terminal
  • Package of 10
$4.50
S-HTUR-AX Turrets - mounting, for use on 2mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-BX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.88
S-HTUR-BX Turrets - mounting, for use on 3mm boards
Package of 10
Colors Available:
Turrets for use on boards measuring 3mm thick, such as P-HTUR-C or P-HTUR-B. For 2mm boards, see S-HTUR-AX
Stake and anvil required for mounting.
  • Staking Tool is our part number: S-T1715
  • Anvil is our part number S-T1717
Starting at $1.88
S-HEYE-A Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80
S-HEYE-B Eyelets - Plated Brass, Small, .089” x .125” x .150”
Package of 10
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.80
Don't see what you're looking for? Send us your product suggestions!