Terminal Boards & Strips

Eyelets, bag of 10 (mounts in 1/8" hole).

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.

Premium versions of the pseudo eyelet boards with 7.5mm spacing. The premium versions feature 2.4mm thick boards with gold plated contacts. These PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. For standard versions, see P-HTB-X. 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 7.5mm x 26mm eyelet spacing
• 57.15mm x 30.66mm board
• 45mm spacing for 3.2mm mounting holes
• Great fit for 125B and 1590N1 enclosures

2x12 Board:

• 2 rows of 12 eyelets (24 total)
• 7.5mm x 26mm eyelet spacing
• 87.15mm x 30.66mm board
• 75mm spacing for 3.2mm mounting holes
• Great fit for 1590BB enclosures

Phenolic PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The spacing between pads is 9.1mm horizontally and 34.4mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for 7.5mm spacing 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 9.1mm x 34.4mm eyelet spacing
• 69.42mm x 40.1mm board
• 54.6mm spacing for 3.2mm mounting holes
• Great fit for 1590P1, Gorva S90, and YY slanted enclosures

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 6.35mm horizontally and 22mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. 2x9 Board:

• 2 rows of 9 eyelets (18 total)
• 6.35mm x 22mm eyelet spacing
• 55.44mm x 26.66mm board
• 45mm spacing for 3.2mm mounting holes
• Great fit for 1590B and Gorva C65 enclosures

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 7.5mm horizontally and 26mm vertically.

Phenolic PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for black version. See P-HTB-PG-X for premium black version. 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 7.5mm x 26mm eyelet spacing
• 57.15mm x 30.66mm board
• 45mm spacing for 3.2mm mounting holes
• Great fit for 125B and 1590N1 enclosures

2x12 Board:

• 2 rows of 12 eyelets (24 total)
• 7.5mm x 26mm eyelet spacing
• 87.15mm x 30.66mm board
• 75mm spacing for 3.2mm mounting holes
• Great fit for 1590BB enclosures

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 9.1mm horizontally and 34.4mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for 7.5mm spacing 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 9.1mm x 34.4mm eyelet spacing
• 69.42mm x 40.1mm board
• 54.6mm spacing for 3.2mm mounting holes
• Great fit for 1590P1, Gorva S90, and YY slanted enclosures

2x10 Board:

• 2 rows of 10 eyelets (20 total)
• 9.1mm x 34.4mm eyelet spacing
• 87.1mm x 40.1mm board
• 72.8mm spacing for 3.2mm mounting holes
• Great fit for 1590BB enclosures

Pseudo eyelet boards with 3 rows of ½” spacing. These 2mm thick boards have a vertical spacing of 1” from row to row. The pseudo eyelet PCBs have similar styling to the eyelet/fiberboard used in vintage equipment. The size and layout of the 3 x 29 works well for AB763 style builds. For a blank board to pair with this one for use as an insulator, see P-HBB-3X29.

• 3 rows of 29 eyelets (87 total)
• 0.5” x 1” eyelet spacing
• 14.5” x 2.5” board
• Great fit for AB763 style builds

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Staking tool for small eyelets such as S-HEYE-B. Directions:

• Drill hole using #42 drill bit
• Insert eyelet
• Flip board over onto a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

Single socket, 2 rows/6 lugs per row, 4 mounting holes. Board dimensions 3" x 3". Terminals are not pre-wired.

Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.

1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".

1 row/6 lugs per row, 2 mounting holes. Board dimensions 3" x ½".

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.

2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!

• Accepts 2mm turrets.

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.

• 2mm board
• 5F1 Layout

Turret board with pre installed turrets designed to be used to build a 5F6A layout or variants. Includes the required 2 pieces

• 2mm board
• 5F6A Layout
• Includes 2 pieces

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.