Terminal Boards & Strips

Single row of 26 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Two rows of 8 U-style terminals (16 total) on a black board. This U-style terminal strip is extra dense with 6.35mm terminal spacing allowing for even more densely populated point-to-point builds. The boards are 0.063” thick.

PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. The spacing between pads is 9.1mm horizontally and 34.4mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for 7.5mm spacing 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 9.1mm x 34.4mm eyelet spacing
• 69.42mm x 40.1mm board
• 54.6mm spacing for 3.2mm mounting holes
• Great fit for 1590P1, Gorva S90, and YY slanted enclosures

2x10 Board:

• 2 rows of 10 eyelets (20 total)
• 9.1mm x 34.4mm eyelet spacing
• 87.1mm x 40.1mm board
• 72.8mm spacing for 3.2mm mounting holes
• Great fit for 1590BB enclosures

Single row of 9 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Single row of 3 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

Two rows of 30 U-style terminals (60 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.

Single row of 7 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Two rows of 15 U-style terminals (30 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Two rows of 13 U-style terminals (26 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Single row of 11 U-style terminals on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

2 rows/12 lugs per row, 2 mounting holes, 5 ¼" x 1 ¼" board dimensions.

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

• Accepts 2mm turrets.

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.

• 2mm board
• 5F1 Layout

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Turret strip, with 6 turrets. Measures 67mm x 15.875mm.

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

1 row/12 lugs per row. 2 mounting holes. Board dimensions 5 ¼" x ½".

2 rows/6 lugs per row, 2 mounting holes. Board dimensions 3" x 1 ¼".

Turret strip, with 9 turrets. Measures 95mm x 15.875mm.

Phenolic PCBs with similar styling to the eyelet/fiberboard used in vintage equipment. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. The spacing between pads is 7.5mm horizontally and 26mm vertically. The two mounting holes have a 3.2mm diameter to fit M3 or 4-40 hardware and also fit the S-H190 adhesive standoffs perfectly. See P-HTB-X for black version. See P-HTB-PG-X for premium black version. 2x8 Board:

• 2 rows of 8 eyelets (16 total)
• 7.5mm x 26mm eyelet spacing
• 57.15mm x 30.66mm board
• 45mm spacing for 3.2mm mounting holes
• Great fit for 125B and 1590N1 enclosures

2x12 Board:

• 2 rows of 12 eyelets (24 total)
• 7.5mm x 26mm eyelet spacing
• 87.15mm x 30.66mm board
• 75mm spacing for 3.2mm mounting holes
• Great fit for 1590BB enclosures