Terminal Boards & Strips

Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.99
package of 10

Eyelets, bag of 10 (mounts in 1/8" hole).
$0.80
package of 10

Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
$0.85
package of 10

Colors Available:
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
Starting at $1.93
package of 10

0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
$0.15

Bifurcated turrets for use on boards measuring 3mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 2mm boards, see S-HTUR-BI-2S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.25
package of 10

Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.
- Contact Material: Brass
- Contact Plating: Tin
- Inner Diameter: 3.5± 0.2 mm
- Outer Diameter: Ø6.3 ± 0.2 mm
- Length: 12.7 ± 0.5 mm
- Thickness: 0.35 mm
$1.35
package of 12

Hollow Turret Terminal,Brass, .172" Long, Premium.
- Finish/Plating: Tin
- For Panel Thickness: .125 [3.2]
- Material: Brass
- Mounting Hole: 0.116
- Terminal Length: 0.312
- Terminal Style: Tubular Turret
- Type: Solder Turret Terminal
- Package of 10
$4.95
package of 10

PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
$0.79

High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.
Stake and anvil required for mounting.
- Triple turret with slot
- 9.12mm height when installed
- 3.18mm diameter
- For 3.0mm to 3.2mm panel thickness
- Recommended for mounting holes sized 2.68mm to 2.78mm
- Bright 100% tin finish
- Knurled underside of shoulder to prevent rotation once swaged
Stake and anvil required for mounting.
- Staking Tool is our part number: S-T1715
- Anvil is our part number S-T1717
- For a budget tool set see S-T-STAKE-SET
$4.95
package of 10

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
$12.55

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:
- Drill 1/8" hole
- Insert eyelet
- Flip board over on to a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$14.95

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.
$5.99
package of 10

Turret anvil for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For staking tool see S-T1715
Directions:
For staking tool see S-T1715
Directions:
- Drill 1/8" hole
- Insert eyelet
- Flip board over on to a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$14.39

Staking tool for small eyelets such as S-HEYE-B. Directions:
- Drill hole using #42 drill bit
- Insert eyelet
- Flip board over onto a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
$14.95