You are here

Tech Supplies

 

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(23 pages)
S-T1715Staking Tool - for Eyelets and Turrets
Turret staking tool.
Directions:
  • Drill 1/8" hole
  • Insert eyelet
  • Flip board over on to a hard service
  • Center staking tool over the eyelet
  • Strike staking tool with hammer to clamp eyelet to board
$9.95
$8.96
You save: 10%
Click to read more
S-T9338Burnishing Tool - GC Electronics, ¼" wide, steel

Stainless steel strip, microscored to an ultrafine file surface. Remove oxide and corrosion on contacts made of platinum, paladium, moybdenum, gold, tungsten, and silver.


$3.25
$2.93
You save: 10%
Click to read more
S-T8454Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.

Tools are:

  • 8282 Zenith type Hex/Screwdriver
  • 8606 5" Hex wrench
  • 9091 Hex iron core tool
  • 9300 5" Double sided hex tool
  • 9304 Hex screwdriver combination
  • 8608 Potentiometer Adjustment Tool
$7.95
$7.16
You save: 10%
Click to read more
S-M436WSpaghetti - Old-Style, White, 20 AWG
White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG. 11 AWG also available as part number S-M401W. Minimum order is 10 feet
This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.
$0.50
$0.45
You save: 10%
A minimum order of at least 10 is required.
Click to read more
S-CK-CK44-GKit - Caig, Caikote 44 carbon coating

Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Net Weight: 1.0 g Surface Resistivity: 50 ohms/sq Volume Resistivity: 0.5 ohm-cm Attenuation: 60-65 dB @ 2 mils Recommended Film Thickness: 2.0 - 3.0 mils (51-75 mm)


$9.95
$8.96
You save: 10%
Click to read more
S-TETRSoldering iron tip - Weller, 1.6mm, screwdriver, for WES51
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWES51.
  • Sensor hole in the base of tip is fitted with a stainless steel liner
  • Prevents the tip from seizing to the sensor
$4.95
$4.46
You save: 10%
Click to read more
S-C10-3702Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$9.85
$8.87
You save: 10%
Click to read more
S-T9004Solder - Kester, 60/40, 44 Flux, 66 Core, .031 Dia, .5 OZ
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
$5.78
$5.20
You save: 10%
Click to read more
S-MW-28-200Wire - Magnet, 28 Gauge, 200 feet

Insulated with two coats of enamel. Perfect for winding coils or transformers. 28 gauge, 200 foot. 105°C temperature rating, 600V.


$7.95
$7.16
You save: 10%
Click to read more
S-C10-302Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$8.95
$8.06
You save: 10%
Click to read more

Pages

(23 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Tech Supplies