Synth & Eurorack Parts / DIY

Schottky diode with low forward voltage drop and high switching speeds.

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

High quality nylon M3 flat washers. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw. These are great mounting washers for preventing rack rash on front panels like Eurorack synths or any other use where the surface beneath the screw requires protection.

The 2N3392 is a general purpose NPN transistor in a TO-92 case. The 2N3392 is used in some original silicon Fuzz Face pedals as well as the Brassmaster fuzz.

Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.

Small PCB adapter boards to convert PCB mount 9mm vertical pots to wired panel mount pots. These adapters are great for tight builds allowing for more densely populated panels than 16mm options. They’re also a great way to incorporate sealed potentiometers into builds where larger sized options would be cost prohibitive.

Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a two-input NAND gate with Schmitt-trigger action on both inputs. The gate switches at different points for positive- and negative-going signals. The difference between the positive voltage (VP) and the negative voltage (VN) is defined as hysteresis voltage (VH). Features:

• Schmitt-trigger action on each input with no external components
• Hysteresis voltage typically 0.9 V at VDD = 5 V and 2.3 V at VDD = 10 V
• Noise immunity greater than 50%
• No limit on input rise and fall times
• Standardized, symmetrical output characteristics
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V over full package-temperature range, 100 nA at 18 V and 25°C
• 5-V, 10-V, and 15-V parametric ratings
• Meets all requirements of JEDEC Tentative Standard No.

Dust cover for standard size DC power jacks. This cover is simple to install and can help protect the power jack on effects pedals and other electronics using this style of DC jack. Jack sold separately.

MC78L05 5V Linear Regulator. Used in MOD® kits. The TI version is the LM78L05. This fixed-voltage monolithic integrated circuit voltage regulator is suitable for applications that required supply current up to 100 mA.

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz.

High-quality Bourns 3296Y trimpots. These sealed cermet trimmers have 25 turns for precision setting. ±10% tolerance.

W taper, vertical mount, 20kΩ Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

Knurled, slotted nut for W-QP-PJ3410 3.5mm jacks.
See W-QP-NUT-PJ-H for the hex version of this nut.
See S-TND-2X for nut driver tool

TI377 PNP germanium transistors from Texas Instruments. The TI377 is a great PNP for fuzz pedals and other effects. This transistor is in a metal SO-2 package with long leads commonly found on germanium transistors. This package with the gold leads visually matches the 2G308, 2G309, and 2G381 transistors found in Zonk and Tonebender MKI fuzz pedals.

Premium three position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details

• 5.59mm non-threaded bushing
• 3-Position On/On/On
• 4.95mm panel hole diameter
• Double pole/Double throw (DPDT)
• PC Pins

Features

• Power Rating: DC9V, 1A
• Contact Resistance: <20mΩ
• Insulation Resistance: 1000MΩ Minimum
• Dielectric Strength: 1000V RMS @ Sea Level
• Operating Temperature: -40°C ~ +85°C
• Electrical Life: 30,000 Cycles
• RoHS & Lead-free

TL084 quad op amp in a 14-pin DIP package. These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage ( BI-FET II™ technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth.

16mm solid shaft audio potentiometers. These pots are great for any project. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Audio (Log)

CD4030B types consist of four independent Exclusive-OR gates. THe CD4030B provides the system designer with a means for direct implementation of the Exclusive-OR function. Features:

• Medium-speed operation—tPHL, tPLH = 65 ns (typ.) at VDD = 10 V, CL = 50 pF
• 100% tested for quiescent current at 20 V
• Standardized, symmetrical output characteristics
• 5-V, 10-V, and 15-V parametric ratings
• Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C
• Noise margin (over full package-temperature range) =
  
  • 1 V at VDD = 5 V
  • 2 V at VDD = 10 V
  • 2.5 V at VDD = 15 V
• Meets all requirements of JEDEC Tentative Standard No.

The AS194DE is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.

High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.68 in.
• Diameter: 0.50 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.

Prototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190) Features:

• Single-sided high-quality FR4 glass-epoxy circuit board.
• Convenient 2-hole pattern provides an easy way to connect parts.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
• 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
• PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)

10kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and a linear taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)