Switches

P-ECB-035 Switch - Dunlop, Footswitch, GCB-95
GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$9.95
P-ECB-555 Switch - Dunlop, Footswitch, DPDT, Solder Lugs, for MXR
Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.
$14.95
P-H-LEHLE-BTN-X Footswitch - Lehle, SPST, Momentary, Soft Click, Long Life
The LEHLE SWITCH BTN is a momentary foot switch. It is housed in an M12 threaded enclosure made of stainless steel. Thanks to the gold plated contact material its life span is at least one million switching cycles electrically and mechanically. Hardware included.
Starting at $14.95
P-H-LEHLE-SW-X Relay Module - Lehle, Relay True Bypass Switching Unit
The LEHLE MODULE SW is a true bypass switching unit with relay and an active pop suppression function controlled by an intelligent microcontroller circuit, thereby allowing the LEHLE MODULE SW to switch even faster than mechanical switches, noise-free and without wear.
Starting at $22.95
P-H1700 Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side.
$26.95
P-H1701 Switch - Rotary, Impedance Selector, 3 Position
Rotary impedance selector, 4/8/16. Body screws onto chassis hole.
$12.95
P-H35-242 Switch - Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.35
P-H410-A Footswitch - 4PDT, Black, Solder Lugs
Quad Pole, Double Throw (4PDT), latching footswitch with 12 solder lugs.
$4.95
P-H489 Switch - Marshall, Rocker, Power for MG Amps, Black
Original Marshall™. Black rocker switch for MG amps. 0.51" x 0.76" Mounting Hole. DPST.
$3.95
P-H490 Switch - Rocker, Standby for JCM Series & Others, Black
For Marshall™, JCM series and others. 15/16" x 1 1/16" x 1" deep.
$5.15
P-H491 Switch - Rocker, Lighted Power, Used in JCM Series & Others
Lighted power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
$6.95
P-H492 Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H493 Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
P-H494 Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position toggle switch. Great Fender ground switch replacement.
$4.25
P-H495 Switch - Carling, Toggle, SPST, Replacement for Fender®
Fender® style power and/or standby switch (Single Pole, Single Throw). This switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired.
$3.90
P-H502 Switch - Selector, Vintage Style, for Marshall, Male
Vintage style selector switch male part, replacement for Marshall.
$7.45
P-H507 Switch - Peavey, Rocker, SPST, On-Off
Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
$1.85
P-H514 Switch - Fender®, Toggle, SPST, Standby, Solder Lugs
Original Fender®, Carling SPST power for Fender tube amps - 3A, 250VAC; 6A, 125VAC, ½" mounting hole.
$5.20
P-H530 Switch - Carling, Toggle, SPST, On-Off, Side Solder Lugs
Carling, 2 position, On-Off, SPST with solder lugs, 1/2" mounting hole.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$3.95
P-H534 Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • Three pole/double throw (3PDT)
$3.50
P-H54-NUT-DRESS Nut - Dress Nut, For Mini Toggle Switches
Genuine Carling Technologies dress nuts for use with Carling mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 15/32-32 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$0.49
On Backorder
P-H540 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.50
P-H5410 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$2.75
On Backorder
P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.79
On Backorder
Don't see what you're looking for? Send us your product suggestions!