Switches

Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
$32.85

Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.
$16.79

Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.59

Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
$10.95

Carling SPST latching On-Off footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$7.25

1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.
$6.45

Fender® style power and/or standby switch (Single Pole, Single Throw). This latching On-Off switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired.
$4.75

SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.
$2.45

Vintage style selector switch male part, replacement for Marshall.
$10.25

Carling miniature rocker switch, SPST with .187" tabs (Peavey Style). Matte Finish. Black base/actuator. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
$1.25

Carling miniature rocker switch, DPST with .187" tabs (Marshall style). On-Off. 4A 250VAC; 8A 125VAC; 6A 250V. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
$2.59

5-way pickup selector switch for Stratocasters. Black switch tip.
$6.75

3 Position Les Paul/PRS style switch. US Retro-fit, black.
$8.95

Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50

Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50

Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
$5.35

Cap Colors Available:
Starting at $7.95

Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.
- Non-polarized optical side is indicated by silver dot and slightly longer leads
- Resistive side is indicated only by slightly shorter leads
- This neon lamp optocoupler is commonly referred to as a roach
$8.95

- Ratings:
- IEC: 6.3 A / 250 VAC; 50 Hz
- UL: 10 A / 250 VAC; 60 Hz
- CSA: 8 A / 250 VAC; 60 Hz
- Mounting: Panel Mount from front side
- Fastening: Screw-on mounting
- Terminal: Solder
- Number of Stages: 3
- Type: SP3T
- Lifetime: 300 operating cycles (without load)
- Degree of Protection: IP 40
- Allowable Operation Temp.: -40 °C to 85 °C
- Climatic Category: 25/85/21 acc. to IEC 60068-1
- Material of Socket: Thermoplastic, black, UL 94V-0
- Weight: 16.5 g
- Solderability: 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2
- Resistance to Soldering Heat: 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2
- Insulation Resistance: > 10,000MΩ (500VDC; 1min)
- Contact Resistance: < 10 mΩ at 20 mV
- Dielectric Strength:
- > 2.5kVAC between L-N (1min; 50Hz)
- > 4kVAC between L/N-PE (1min; 50Hz)
- Clearance and Creepage Distance:
- > 5mm
- > 8mm between L/N-PE
- Resistance to Vibration: acc. to IEC 60068-2-6, test Fc
$33.98

Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$19.95

Colors Available:
Starting at $18.95

Colors Available:
$2.70