Switches

Optocouplers

Optocouplers transfer electrical signals between isolated circuits through light, allowing isolation of high voltages from lower voltages.
P-H-LEHLE-BTN-X Footswitch - Lehle, SPST, Momentary, Soft Click, Long Life
The LEHLE SWITCH BTN is a momentary foot switch. It is housed in an M12 threaded enclosure made of stainless steel. Thanks to the gold plated contact material its life span is at least one million switching cycles electrically and mechanically. Hardware included.
Starting at $13.95
R-VTL5C1-P Optocoupler - Vactec, VTL5C1, Vactrol, New Old Stock
New old stock Vactec VTL5C1 vactrols from Perkin Elmer Optoelectronics. These premium vactrols are a great choice for use in phasers, compressors, tremolos, and synth modules such as low-pass gates. They are also used in switching circuits in amplifiers. Limited quantities are available.
$10.95
P-H590-X Footswitch - 3PDT, LED Ring
Colors Available:
3PDT. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
P-H410 Switch - Footswitch, 4PDT, Blue, 12 Pins
4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.
$7.95
R-VOP1020 Switch - Vibrato LDR, for Fender® Amps
Optocoupler. Vibrato LDR for Fender Amps. Fix the dead LDR-style tremolo on your vintage Fender amps as well as others.
  • Non-polarized optical side is indicated by silver dot and slightly longer leads
  • Resistive side is indicated only by slightly shorter leads
$8.95
R-VTL5C1 Optocoupler - VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$7.95
P-H492 Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H493 Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
P-H497 Footswitch - Carling, DPDT, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
P-H498 Footswitch - DPDT, Solder Lugs
Great replacement for stomp-box effects requiring a DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
$3.95
P-H498-PC Footswitch - DPDT, PC Mount
DPDT footswitch, PC mount, same switch as P-H497 but made in Taiwan and PC mount.
$3.95
P-H501 Footswitch - 3PDT, Blue, Taiwan
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in Taiwan.
$6.95
P-H501-PC Footswitch - 3PDT, Blue, PC Mount
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$7.95
P-H503 Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A
$3.95
P-H503-PC Footswitch - DPDT, Momentary, PC Terminals
DPDT momentary footswitch with PC terminals. Black with 6 terminals. AC125V 4A, AC250V 2A.
$4.50
P-H505 Switch - Peavey, Footswitch, SPST, On-Off, Solder Lugs
SPST latching footswitch with solder lugs. On-Off. 3A 250V, 6A 125V. Made in Mexico.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$6.85
Out of Stock
P-H550 Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
P-H551 Switch - Carling, Footswitch, SPST, Off-(On), Screw Terminals
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$4.06
Save 42%
Originally: $6.95
P-H552X Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$7.95
P-ECB-035 Switch - Dunlop, Footswitch, GCB-95
GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$9.95
P-ECB-555 Switch - Dunlop, Footswitch, DPDT, Solder Lugs, for MXR
Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.
$14.95
P-SW57 Switch - Fender®, Push SLFLK Short
Package of 2
Genuine Fender replacement switch. Push SLFLK Short Stroke. 6 pin PCB mount
$3.95
P-ECB-554 Switch - Dunlop, MXR, DPDT, PC mount
This is a small double pole double throw (DPDT) effect / bypass switch for MXR pedals. Genuine Dunlop replacement part. Six pin through hole PCB mount.
$5.95
P-H501-A Footswitch - 3PDT, Blue, China
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in China.
$2.95
Don't see what you're looking for? Send us your product suggestions!