Switches
Switch - Black Bat, Toggle, DPST, On-Off/Off-On, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.
$4.35
Switch - Black Bat, Toggle, 4PST, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This 4PST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
$5.50
Switch - Black Bat, Toggle, SPST, On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
$3.75
Switch - Black Bat, Toggle, DPST, On-Off/On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.
$4.95
Footswitch - 3PDT, black body, Solder Lugs, Low Profile
Low profile switches with a smaller footprint than the standard 3PDT sizes. These footswitches are perfect for cramped layouts but are also great for general use. The small solder lugs are great for wiring by hand that also work well with PCB layouts. Mounting hardware included. Features
- Latching Footswitch
- 3PDT
- Low Profile
- Small Solder Lugs
- Hardware Included
$3.40
Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
Starting at $9.50
Switch - Toggle, SPST, for Fender®
SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.
$2.50
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch, Black
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
- SPST momentary switch
- Black finish and hardware
- Soft, silent switching with no click
- Normally open operation
- Solder lugs
- Nuts and washer included
- Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$3.50
Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Also used for bright switches in Fender black and silverface amplifiers. Upgrade cheap or malfunctioning switches with these high quality replacements.
- Recommended .75 control cavity depth
- 1.125” center-to-center mounting hole spacing
- Latching
- Screws not included
- See S-HS440-12 for compatible screws
$4.45
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder Lugs
$5.45
Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
$9.50
Footswitch - DPDT, Solder Lugs
Great replacement for stomp-box effects requiring a latching DPDT (Double Pole, Double Throw) switch. AC125V/4A AC250V/2A.
$3.99
Switch - Carling, Toggle, DPDT, On-On, Short Bat
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$10.95
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 3-Position
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Starting at $5.25
Switch - Fender®, Pickup Selector, 4-Way Telecaster Mod
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output.
$18.95
Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A. Rated for 50,000 make-and-break cycles at full load.
$4.55
Switch - Switchcraft, Pickup Selector Toggle, 3-Way, right angle
Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X
Nickel Finish
Tip not included, see W-SC-W0X
Nickel Finish
$21.95
Switch - Dunlop, Footswitch, GCB-95
GCB-95 latching switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$12.43
Switch - GØRVA, Mini Toggle, SPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.69
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$20.95
Switch - Carling, Toggle, SPST, On-Off, Solder Lugs
Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
$4.59
Switch - Switchcraft, Pickup Selector Toggle, SPST, right angle
Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.
- Tip not included. See W-SC-W0X
- Black finish
$29.95
Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
$36.39
Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 3-Position On/On/On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.95