Switches
Switch - GØRVA, Mini Toggle, SPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.69
Footswitch - 4PDT, Black, Solder Lugs
Quad Pole, Double Throw (4PDT), latching footswitch with 12 solder lugs.
$4.99
Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
Features
- 5.59mm non-threaded bushing
- 2-Position On/On
- 4.95mm panel hole diameter
- Single pole/Double throw (SPDT)
- PC Pins
Features
- Power Rating: DC9V, 1A
- Contact Resistance: <20mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 30,000 Cycles
- RoHS & Lead-free
$1.35
Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
Note: On-On switches may sometimes be referred to as On-None-On.
- SPDT ( Single Pole/ Double Throw) On-On switch
- 0.275" bushing length
- 0.270” bat length
- ¼" chassis hole diameter
- Right angle, PC Mount terminals
Note: On-On switches may sometimes be referred to as On-None-On.
$3.85
Tactile Switch - Tube Screamer Replacement, PCB Mount
PCB mounted tactile switch most commonly used as a replacement for faulty Tube Screamer footswitches. This Off-(On) SPST tactile switch is rated for 12VDC at 50mA.
$0.89
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
- 0.354" bushing length
- 1/4" mounting hole diameter
- On-On Three pole/double throw (3PDT)
$4.95
Switch - Tactile, Pushbutton, 5mm Height, 2 Pin, PCB Mount
PCB snap-in tactile switch with a 5mm height when mounted. This momentary Off-(On) SPST tactile switch has a two pin 4.5mm footprint.
$0.24
Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- PC mount pins
$3.25
Switch - Tactile, Pushbutton, 9.5mm Height, PCB Snap-in
PCB snap-in tactile switch with a 9.5mm height when mounted. This momentary Off-(On) SPST tactile switch has a standard 6.5mm x 4.5mm footprint.
$0.24
Switch - Carling, Submini Toggle, SPDT, 2 Position, PC Pins
Carling submini toggle switch, SPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$4.95
Switch - Dunlop, Footswitch, GCB-95
GCB-95 latching switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$12.43
Footswitch - 3PDT, Alpha, Solder Lugs, Long Bushing
High quality Alpha 3PDT footswitch with solder lugs and a long bushing. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.
- Bushing Length: 15.25mm
- Threading: M12 x 0.75
- Solder Lugs
$4.50
Switch - Carling, Mini Toggle, DPDT, 2-Position, PC Pins
0.354" bushing length. 2-Position On/On. ¼" mounting hole diameter. Double pole/Double throw (DPDT). PC mount pins.
$3.59
Footswitch - Carling, 112-P, SPDT
Carling SPDT latching footswitch used in footswitch boxes and effects pedals (112-P). This style of On-On footswitch can be found in many vintage stomp boxes and channel/effect footswitches. The two identical lugs are the two throws and the lug with a unique shape is the common pole.
$9.95
Footswitch - ST Professional, DPST, Latching, Solder Lugs
Heavy duty DPST latching switch made in Italy by ST Professional. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling switches and provides tactile and audible feedback so the switching action is apparent to the user. This version features standard solder lugs. This style of footswitch is similar to the vintage footswitches found in the Gary Hurst Fuzz King, the Hornby Skewes Shatterbox, the Jen Fuzz III, the Selmer Buzz Tone, and others.
$9.95
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Flattened
Carling mini-toggle switch, SPDT. This switch features a flattened actuator.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder Lugs
$5.45
Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary Off-(On), push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.99
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch, Black
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
- SPST momentary switch
- Black finish and hardware
- Soft, silent switching with no click
- Normally open operation
- Solder lugs
- Nuts and washer included
- Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$3.50
Switch - Carling, Mini Toggle, DPDT, 2 Position, PC Pins, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 2-Position On/On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- PC mount pins
$4.95
Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT latching footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
Switch - GØRVA, Mini Toggle, DPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 2-Position On/On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.95
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
- SPST momentary switch
- Soft, silent switching with no click
- Normally open operation
- Solder lugs
- Nuts and washer included
Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$3.20
Switch - GØRVA, Submini Toggle, DPDT, 2 Position, PC Pins, Medium Bat
Premium two position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
Features
- 5.59mm non-threaded bushing
- 2-Position On/On
- 4.95mm panel hole diameter
- Double pole/Double throw (DPDT)
- PC Pins
Features
- Power Rating: DC9V, 1A
- Contact Resistance: <20mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 30,000 Cycles
- RoHS & Lead-free
$1.45
Footswitch - 3PDT, with built-in LED Ring
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Colors Available:
Starting at $7.95