Switches

S-HM100-A Switch - Rotary, Voltage Selector, Modern, for Marshall
  • Ratings:
    • IEC: 6.3 A / 250 VAC; 50 Hz
    • UL: 10 A / 250 VAC; 60 Hz
    • CSA: 8 A / 250 VAC; 60 Hz
  • Mounting: Panel Mount from front side
  • Fastening: Screw-on mounting
  • Terminal: Solder
  • Number of Stages: 3
  • Type: SP3T
  • Lifetime: 300 operating cycles (without load)
  • Degree of Protection: IP 40
  • Allowable Operation Temp.: -40 °C to 85 °C
  • Climatic Category: 25/85/21 acc. to IEC 60068-1
  • Material of Socket: Thermoplastic, black, UL 94V-0
  • Weight: 16.5 g
  • Solderability: 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2
  • Resistance to Soldering Heat: 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2
  • Insulation Resistance: > 10,000MΩ (500VDC; 1min)
  • Contact Resistance: < 10 mΩ at 20 mV
  • Dielectric Strength:
    • > 2.5kVAC between L-N (1min; 50Hz)
    • > 4kVAC between L/N-PE (1min; 50Hz)
  • Clearance and Creepage Distance:
    • > 5mm
    • > 8mm between L/N-PE
  • Resistance to Vibration: acc. to IEC 60068-2-6, test Fc
$35.45
P-H1700 Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
$34.95
On Backorder
W-SC-W16 Switch - Switchcraft, Pickup Selector Toggle, SPST, right angle
Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.
  • Tip not included. See W-SC-W0X
  • Black finish
$29.95
W-SC-W15 Switch - Switchcraft, Pickup Selector Toggle, DPDT, Right Angle
Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
  • Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
  • Nickel Finish
$28.29
W-SC-W14 Switch - Switchcraft, Pickup Selector Toggle, 3-Way, right angle
Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish
$21.95
W-SC-W01 Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$20.95
W-SC-W12 Switch - Switchcraft, Toggle, 3-way, for Les Paul
One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.
$20.95
W-SC-W0213 Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $18.95
P-H1701 Switch - Rotary, Impedance Selector, 3 Position
Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.
$16.95
P-H600-A Switch - Rotary, 1 Pole, 3 Position
High quality three position rotary switch commonly used as an impedance selector switch on tube amps. This rugged switch is rated for 6A at 125VAC and 3A at 250VAC. The flatted 6mm shaft can be used with the shaft adapter found in the accessories below to easily fit standard ¼” knobs. Mounting hardware included. SP3T.
$12.95
P-H1600-A Switch - Rotary Impedance Selector, for Hammond 1600A series
Includes: 3 pole, 3 position rotary switch (3P3T), 1/4" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with 1/4" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and 1/4" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G)
(See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)
$11.95
P-SW50 Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
$11.50
P-SW64 Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-H35-148 Switch - Toggle, DPDT, 3 Position, On-Off-On
3 position (on-off-on) heavy duty bat handle toggle switch with screw terminals. Made in USA.
  • Rating: 20A 125VAC, 10A 250VAC, 3/4" HP 125 - 250VAC
  • DPDT
  • Mounting Hole: .50in.
$9.85
P-H521X Switch - Carling, Toggle, DPDT, 3 Position, On-Off-On
Carling, 3 position DPDT toggle switch (on-off-on). Rated for 12A at 250VAC and 17A at 125VAC.
$8.95
P-SW62-B Switch - Les Paul 3 Position, US Retro-Fit, black base
3 Position Les Paul/PRS style switch. US Retro-fit, black.
$8.95
P-SW66X Switch - Les Paul 3 Position, US Retro-Fit, silver base
Cap Colors Available:
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
Starting at $7.95
P-H520 Switch - Carling, Toggle, DPST, 3 Position, Play-Stdby-Off
Carling, DPST 3 position toggle switch (play-stby-off). Length: 1.32" Width: 0.75" Body Depth: 0.78" Chassis Hole Diam: 0.50"
$7.45
P-H5420X Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
  • 0.354" bushing length
  • 3-Position
  • ¼" chassis hole diameter
  • DPDT ( Double Pole/ Double Throw) switch
  • Solder Lugs
Starting at $6.45
P-H496 Switch - Carling, Toggle, SPDT, 3 Position, Center Off, Ground
Carling SPDT 3 position center off toggle (On-Off-On). Great Fender ground switch replacement, 3A, 250VAC; 6A, 125VAC.
$5.65
P-H549 Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
$5.45
W-SC-W11 Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.406” center-to-center mounting hole spacing
  • #4-40 screws recommended for mounting
  • Screws not included
$5.35
P-SW65 Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
$5.35
On Backorder
P-H5415X Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
  • 0.354" bushing length
  • 3-Position
  • ¼" mounting hole diameter
  • Double pole/Double throw (DPDT)
  • Solder lugs
Starting at $5.25
Don't see what you're looking for? Send us your product suggestions!