Switches

S-M560 Insulation - GC Electronics, fibroid, "fish paper"
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required. Its qualities of toughness, flexibility, and edge-tearing resistance combined with high dielectric strength and ready absorption of insulating varnish have led to its predominant use as an improved motor slot call insulation. Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
$6.25
S-HLW-CARLING Locking Washer - Carling, for switches
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$3.95
package of 5
S-HSW-M12 Washer - Flat, M12, Stainless Steel, Thick
Extra thick M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These thick steel washers are a great way to add a classy look to projects.
$3.85
package of 10
P-H52-NUT-KNURL Knurled Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
Genuine Carling knurled nut commonly used on full size toggle switches and footswitches. This nickel plated knurled nut has a 15/32 threading and offers a clean look on builds using these switches.
$3.50
package of 5
S-HNFW-M12-X Washer - Flat, M12, Nylon, for Foot Switches
Colors Available:
Nylon flat washers for use with foot switches. These washers are M12 size and fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches.
$2.95
package of 10
P-H52-WASHER-LOCK Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
$2.95
package of 5
P-H52-NUT-HEX Hex Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
Genuine Carling hex nut commonly used on full size toggle switches and footswitches. This nickel plated hex nut has a 15/32 threading.
$2.25
package of 5
W-SC-W056 Nut - replacement for Switchcraft, Deep Thread, Knurled
Colors Available:
Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the body enough. Switchcraft toggles come stock with a flat washer and thicker bodied guitars with carved tops or Les Paul guitars with a selector ring require a nut with longer reach. These nuts will attach your switch to the nut through the body with no issues.
  • Fits genuine Switchcraft switches
  • Available in gold or nickel finish
  • Sold individually
Starting at $2.15
P-H54-NUT-HEX Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
$1.95
package of 5
P-H54-WASHER-TAB Washer - Keyed Flat, For Mini Toggle Switches
Keyed washer for use with mini toggle switches. These nickel plated washers work on any 1/4-40 UNS threaded bushing with a vertical key slot. A small anti-rotation tab is on the outer edge of this flat washer. These are the same as the stock washers included with Carling mini toggle switches.
$1.95
package of 5
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
$1.79
S-HM300N Nut - Marshall style, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    P-H52-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
    Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
    $1.75
    P-H52-WASHER-GND Washer - Chassis Ground, For 15/32” Bushings
    Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.
    $1.49
    P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
    Colors Available:
    Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
    $1.29
    P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.25
    P-H54-WASHER-LOCK Washer - Internal Tooth Lock, ¼”, For Mini Toggle Switches
    Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.
    $1.25
    package of 5
    P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.15
    S-HSDW-M12-X Washer - Flat, M12, Stainless Steel, Oversized
    Colors Available:
    Oversized M12 flat washers. These washers fit both metric (M12) and imperial (15/32) bushings for compatibility with the vast majority of foot switches and full-sized toggle switches. These oversized washers are a great way to add a distinctive look to projects.
    Starting at $0.95
    P-H52-INDICATORX Switch Indicator Plate - Washer, Carling, On-Off
    High quality switch indicator plates from Carling. These are made from nickel plated steel and feature deeply engraved text. These indicator plates fit full sized Carling toggle switches.
    $0.85
    P-H54-DRESS-X Nut - Dress Nut, For Mini Toggle Switches
    Colors Available:
    Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    Starting at $0.75
    P-H52-NUT-PLX Nut - Large Dress Nut, Carling, 15/32-32UNS, Plastic
    Colors Available:
    Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These nuts are made of a strong durable plastic and feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is not capped so they can thread past the top of the bushing. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
    Starting at $0.75
    W-SC-S1029 Washer - Switchcraft, S1029, shoulder for insulating panels
    Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
    $0.75
    P-H54-CAP-X Switch Accessory - Mini Toggle Caps
    Colors Available:
    Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.
    Starting at $0.59
    Don't see what you're looking for? Send us your product suggestions!