Switches

For Marshall™, JCM series and others. 15/16" x 1 1/16" x 1" deep. DPST On-Off switch,

Includes: 3 pole, 4 position rotary switch (3P4T), 1/4" output jack and black chicken head knob. Hammond 1600 series transformers all provide secondary impedances of 4, 8, or 16 ohms but due to the unique wiring of the secondary, the impedance cannot be changed without rewiring... Until now. We now offer a selector switch, pre-wired and complete with 1/4" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and 1/4" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary.

Includes: 3 pole, 3 position rotary switch (3P3T), 1/4" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with 1/4" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and 1/4" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G)
(See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)

.3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.

High quality three position rotary switch commonly used as an impedance selector switch on tube amps. This rugged switch is rated for 6A at 125VAC and 3A at 250VAC. The flatted 6mm shaft can be used with the shaft adapter found in the accessories below to easily fit standard ¼” knobs. Mounting hardware included. SP3T.

.3A 125VAC. 2 pole, 6 position, solid 1/4" shaft. DP6T rotary switch.

Rotary Switch, 3 Poles, 3 Positions (12 solder terminals), Make Before Break. 1/4 solid shaft Bushing width: 11/32" Bushing height: 5/16" Includes nut & washer 0.3A 125VAC. 3P3T rotary switch.

3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft. 3P4T rotary switch.

Cable-mounted inline switch (On-Off) most often used for lamps and other applications. This switch pairs with SPT-1 type power cords and features a thumbwheel actuator.

Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.

Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.

• Ratings:
  
  • IEC: 6.3 A / 250 VAC; 50 Hz
  • UL: 10 A / 250 VAC; 60 Hz
  • CSA: 8 A / 250 VAC; 60 Hz
• Mounting: Panel Mount from front side
• Fastening: Screw-on mounting
• Terminal: Solder
• Number of Stages: 3
• Type: SP3T
• Lifetime: 300 operating cycles (without load)
• Degree of Protection: IP 40
• Allowable Operation Temp.: -40 °C to 85 °C
• Climatic Category: 25/85/21 acc. to IEC 60068-1
• Material of Socket: Thermoplastic, black, UL 94V-0
• Weight: 16.5 g
• Solderability: 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2
• Resistance to Soldering Heat: 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2
• Insulation Resistance: > 10,000MΩ (500VDC; 1min)
• Contact Resistance: < 10 mΩ at 20 mV
• Dielectric Strength:
  
  • > 2.5kVAC between L-N (1min; 50Hz)
  • > 4kVAC between L/N-PE (1min; 50Hz)
• Clearance and Creepage Distance:
  
  • > 5mm
  • > 8mm between L/N-PE
• Resistance to Vibration: acc. to IEC 60068-2-6, test Fc

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
• Nickel Finish

Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.

• Tip not included. See W-SC-W0X
• Black finish

Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.

Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.

Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.

• Recommended .75 control cavity depth
• 1.406” center-to-center mounting hole spacing
• #4-40 screws recommended for mounting
• Screws not included

One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.

Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Also used for bright switches in Fender black and silverface amplifiers. Upgrade cheap or malfunctioning switches with these high quality replacements.

• Recommended .75 control cavity depth
• 1.125” center-to-center mounting hole spacing
• Latching
• Screws not included
• See S-HS440-12 for compatible screws

3 position (on-off-on) heavy duty bat handle toggle switch with screw terminals. Made in USA.

• Rating: 20A 125VAC, 10A 250VAC, 3/4" HP 125 - 250VAC
• DPDT
• Mounting Hole: .50in.

Heavy duty bat handle, DPDT. Rating: 20A 125V AC, 10A 277V AC Mounts in 1/2" hole, screw connections. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.

Toggle switch for Marshall amps, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. Mounting nuts (1 hex and 1 knurled) included. Main features:

• Construction : Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.
• Rating : These switches are suitable for motor loads and power applications up to 15A 250VAC
• UL, CSA and NF-VDE (EN 61058-1) approved

Note: On-Off switches may sometimes be referred to as On-None-Off.

SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.