Switches

P-H512 Switch - Fender®, DPST, Power, for '94 Twin & Others
Original Fender®, Carling DPST standby/power for '94 Twin amp and other amp models - 3A, 250VAC; 6A, 125VAC.
$9.25
W-SC-W15 Switch - Switchcraft, Pickup Selector Toggle, DPDT, Right Angle
Switchcraft Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
  • Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
  • Nickel Finish
$21.95
P-H396 Switch - Carling, Rotary, Off-On, Solder Lug
Single pole multi-position, general purpose rotary switch. This switch features a nylon actuator in a metal clad construction along with a self-cleaning silver plated contact design. Typically used in applications requiring multi-position controls.
$7.95
P-H545-SUB Switch - Carling, Submini Toggle, DPDT, 2 Position, PC Pins
Carling submini toggle switch, DPDT, 2 position, .195" mounting hole diameter, 0.236" bushing length.
$3.95
P-H549 Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
$3.89
P-H603 Switch - for Run Circuit in Hammond Organ
Switch for run circuit in Hammond Organ. Electrical Rating: 16 A - 125 V 8 A - 250 V Dimensions: Mounting Diameter: ½" Bushing Length: 0.425" Length: 1.89" Width: 0.82" Depth: 0.69"
$29.95
P-ECB-233 Switch - Dunlop, PCB mount, boost / distortion kick switch
ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.
$4.65
P-SW57 Switch - Fender®, Push SLFLK Short
Package of 2
Genuine Fender replacement switch. Push SLFLK Short Stroke. 6 pin PCB mount
$4.25
R-VGORVA-BX-SL Potentiometer - GØRVA, Linear, 16mm, Solder Lug, Solid Shaft
High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
S-HM301 Switch - Marshall, Toggle, DPST, On-Off, Chrome Tip
Marshall toggle switch, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. See Marshall nut S-HM300N if necessary. Nut sold separately. Note: On-Off switches may sometimes be referred to as On-None-Off.
$15.95
P-H515 Switch - Fender®, Toggle, SPST, Standby, Tabs
Original Fender®, Carling SPST standby for Fender tube amps - 3A, 250VAC; 6A, 125VAC.
$4.75
P-H551 Switch - Carling, Footswitch, SPST, Off-(On), Screw Terminals
Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$6.95
P-MSTACT Switch - Korg, Momentary Tactile Switch, Under Knob P8012S
Korg Tact switch under knob P8012S. SPST momentary, 0.25in. width.
$4.25
P-H507 Switch - Peavey, Rocker, SPST, On-Off
Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
$1.85
P-ECB-555 Switch - Dunlop, Footswitch, DPDT, Solder Lugs, for MXR
Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.
$15.25
P-H35-148 Switch - Toggle, DPDT, 3 Position, On-Off-On
3 position (on-off-on) heavy duty bat handle toggle switch with screw terminals. Made in USA.
  • Rating: 20A 125VAC, 10A 250VAC, 3/4" HP 125 - 250VAC
  • DPDT
  • Mounting Hole: .50in.
$7.25
W-SC-W0213 Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $15.95
R-VGORVA-AX-SL Potentiometer - GØRVA, Audio, 16mm, Solder Lug, Solid Shaft
High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Audio taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
P-SW-MACT Switch - Korg, Momentary Tactile Switch, Medium Length Actuator
Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.
$5.95
P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.59
P-H394 Switch - Rotary, 3 Poles, 4 Position
3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft.
$2.25
P-H395 Switch - Rotary, 3 Poles, 3 Position
Rotary Switch, 3 Poles, 3 Positions (12 solder terminals), Make Before Break. 1/4 solid shaft Bushing width: 11/32" Bushing height: 5/16" Includes nut & washer 0.3A 125VAC
$2.50
P-H495 Switch - Carling, Toggle, SPST, Replacement for Fender®
Fender® style power and/or standby switch (Single Pole, Single Throw). This switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired.
$3.90
P-H497 Footswitch - Carling, DPDT, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
Don't see what you're looking for? Send us your product suggestions!