Switches
Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT latching footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
Switch - Rocker, Lighted Power, Used in JCM Series & Others
Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
$12.50
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 3-Position
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Starting at $5.25
Switch - Carling, Toggle, DPST, On-Off, Tabs, 15A
Carling, DPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
$7.45
Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
.3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.
Starting at $1.80
Footswitch - SPST, Momentary, Solder Lugs, Soft Switch, Black
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch with solder lugs and soft switching. These high quality switches feature a black actuator, bushing and mounting hardware. Depressing the switch shorts the lugs together and when the switch is released it returns to its non connected state with no click.
- SPST momentary switch
- Black finish and hardware
- Soft, silent switching with no click
- Normally open operation
- Solder lugs
- Nuts and washer included
- Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$3.50
Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
$36.39
Switch - Carling, Toggle, DPST, On-Off, Tabs, 6A
Carling, DPST 2 position toggle switch, On-Off with .25" tabs (6A, 125VAC). Note: On-Off switches may sometimes be referred to as On-None-Off.
$6.55
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 3-Position On/Off/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder lugs
$4.95
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
- 0.354" bushing length
- 1/4" mounting hole diameter
- On-On Three pole/double throw (3PDT)
$4.95
Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
$5.35
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$4.95
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
- 0.354" bushing length
- 2 Position On-On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
$6.55
Footswitch - 3PDT, with built-in LED Ring
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Colors Available:
Starting at $7.95
Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.
$6.45
Switch - Rotary, Impedance Selector, 3 Position
Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.
$16.95
Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
- 0.354" bushing length
- 3-Position
- ¼" chassis hole diameter
- DPDT ( Double Pole/ Double Throw) switch
- Solder Lugs
Starting at $6.45
Toggle Switch - Carling, DPDT, 2 Position, On-On, Terminals
Carling, 2 position DPDT toggle switch with screw terminals. On-On. Note: On-On switches may sometimes be referred to as On-None-On.
$9.85
Switch - Fender®, Pickup Selector, 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 5 position super switch with knob and mounting hardware.
$18.95
Switch - Carling, Toggle, DPDT, On-On, Short Bat
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$10.95
Switch - DIP, Slide, 0.1" Spacing
DIP slide switches with standard 0.1” (2.54mm) lead spacing. These small PCB mounted switches are used in many circuits such as mode settings in effects pedals. Specifications:
- Contact Rating: 100mA 50VDC
- Terminal: Brass with gold plating
- Dielectric strength: 500VAC 1 minute
- Insulation Resistance: 100mΩ min (500VDC)
- Electrical Life: 2,000 cycles per position
- Contact Resistance: 500mΩ max
- Mechanical Life :≥100,000 Cycles
- Operating Temperature :-25°C to +85°C
$0.59
Switch - Black Bat, Toggle, SPST, On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
$3.75
Switch - Carling, Mini Toggle, DPDT, 3-Position, PC Pins
Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
Starting at $3.85
Switch - Toggle, SPST, for Fender®
SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.
$2.50