Switches

P-HTOG-GORVA-S1 Switch - GØRVA, Submini Toggle, SPDT, 2 Position, PC Pins, Medium Bat
Premium two position SPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Single pole/Double throw (SPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
$1.35
R-VGORVA-BX-SL Potentiometer - GØRVA, Linear, 16mm, Solder Lug, Solid Shaft
High-quality solder lug linear taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Linear taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For audio taper solder lug pots see R-VGORVA-AX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
R-VGORVA-AX-SL Potentiometer - GØRVA, Audio, 16mm, Solder Lug, Solid Shaft
High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Audio taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
P-H560 Switch - Carling, Mini Rocker, SPST, On-Off
Carling miniature rocker switch, SPST with .187" tabs (Peavey Style). Matte Finish. Black base/actuator. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
$1.45
P-HTOG-GORVA-S2 Switch - GØRVA, Submini Toggle, DPDT, 2 Position, PC Pins, Medium Bat
Premium two position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
  • 5.59mm non-threaded bushing
  • 2-Position On/On
  • 4.95mm panel hole diameter
  • Double pole/Double throw (DPDT)
  • PC Pins

Features
  • Power Rating: DC9V, 1A
  • Contact Resistance: <20mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 30,000 Cycles
  • RoHS & Lead-free
$1.45
P-H52-WASHER-GND Washer - Chassis Ground, For 15/32” Bushings
Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.
$1.49
P-PC-INV-SWITCH PCB - Charge Pump, -9V from +9V, 3PDT Switch Mount
3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
$1.60
P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.64
P-HTOG-GORVA-M1 Switch - GØRVA, Mini Toggle, SPDT, 2 Position, Solder Lugs, Medium Bat
Premium two position SPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
  • 8.89 mm bushing length
  • Medium bat
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • Solder lugs

Features:
  • Power Rating: DC9V, 1A
  • Contact Resistance: <10mΩ
  • Insulation Resistance: 1000MΩ Minimum
  • Dielectric Strength: 1000V RMS @ Sea Level
  • Operating Temperature: -40°C ~ +85°C
  • Electrical Life: 40,000 Cycles
  • RoHS & Lead-free
$1.69
P-H52-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
$1.75
S-HM300N Nut - Marshall style, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
    Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
    $1.79
    P-H390X Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
    .3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.
    Starting at $1.80
    P-H507 Switch - Peavey, Rocker, SPST, On-Off
    Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
    $1.90
    P-HTOG-GORVA-M2 Switch - GØRVA, Mini Toggle, DPDT, 2 Position, Solder Lugs, Medium Bat
    Premium two position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
    • 8.89 mm bushing length
    • Medium bat
    • 2-Position On/On
    • ¼" mounting hole diameter
    • Double pole/Double throw (DPDT)
    • Solder lugs

    Features:
    • Power Rating: DC9V, 1A
    • Contact Resistance: <10mΩ
    • Insulation Resistance: 1000MΩ Minimum
    • Dielectric Strength: 1000V RMS @ Sea Level
    • Operating Temperature: -40°C ~ +85°C
    • Electrical Life: 40,000 Cycles
    • RoHS & Lead-free
    $1.95
    P-H54-NUT-HEX Nut - Hex Nut, For Mini Toggle Switches
    Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
    $1.95
    package of 5
    P-HTOG-GORVA-S3 Switch - GØRVA, Submini Toggle, DPDT, 3 Position, PC Pins, Medium Bat
    Premium three position DPDT submini toggle switches from Gorva Design. The Bascular Sub Mini switches have a medium 7.37mm actuator length. These switches feature silver plated copper alloy contacts. The bushing is smooth and the switch is secured with the mounting bracket on the PCB. RoHS compliant & lead-free. Details
    • 5.59mm non-threaded bushing
    • 3-Position On/On/On
    • 4.95mm panel hole diameter
    • Double pole/Double throw (DPDT)
    • PC Pins

    Features
    • Power Rating: DC9V, 1A
    • Contact Resistance: <20mΩ
    • Insulation Resistance: 1000MΩ Minimum
    • Dielectric Strength: 1000V RMS @ Sea Level
    • Operating Temperature: -40°C ~ +85°C
    • Electrical Life: 30,000 Cycles
    • RoHS & Lead-free
    $1.95
    P-HTOG-GORVA-M3 Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
    Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
    • 8.89 mm bushing length
    • Medium bat
    • 3-Position On/On/On
    • ¼" mounting hole diameter
    • Double pole/Double throw (DPDT)
    • Solder lugs

    Features:
    • Power Rating: DC9V, 1A
    • Contact Resistance: <10mΩ
    • Insulation Resistance: 1000MΩ Minimum
    • Dielectric Strength: 1000V RMS @ Sea Level
    • Operating Temperature: -40°C ~ +85°C
    • Electrical Life: 40,000 Cycles
    • RoHS & Lead-free
    $1.95
    P-H54-WASHER-TAB Washer - Keyed Flat, For Mini Toggle Switches
    Keyed washer for use with mini toggle switches. These nickel plated washers work on any 1/4-40 UNS threaded bushing with a vertical key slot. A small anti-rotation tab is on the outer edge of this flat washer. These are the same as the stock washers included with Carling mini toggle switches.
    $1.95
    package of 5
    P-H518 Switch - Rocker, Round Mounting Hole, SPST, 6A, 125VAC
    Rectangular rocker switch that uses a round mounting hole. This black nylon rocker switch has a small panel footprint and is easy to add to projects due to the round mounting hole. Mounting nut and lock washer included.
    • SPST
    • On-Off
    • 6A, 125VAC / 3A, 250VAC
    • 12.2mm Mounting Hole
    $1.99
    P-H394 Switch - Rotary, 3 Poles, 4 Position
    3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft. 3P4T rotary switch.
    $1.99
    W-SC-W056 Nut - replacement for Switchcraft, Deep Thread, Knurled
    Colors Available:
    Deep thread nut for use with Switchcraft switches. Used on some models of Gibson® guitars and other brands where the threading of the switch isn’t able to protrude through the body enough. Switchcraft toggles come stock with a flat washer and thicker bodied guitars with carved tops or Les Paul guitars with a selector ring require a nut with longer reach. These nuts will attach your switch to the nut through the body with no issues.
    • Fits genuine Switchcraft switches
    • Available in gold or nickel finish
    • Sold individually
    Starting at $2.15
    P-H392X Switch - Rotary, 2 Poles, 6 Positions, ¼" Shaft
    .3A 125VAC. 2 pole, 6 position, solid 1/4" shaft. DP6T rotary switch.
    Starting at $2.20
    P-H52-NUT-HEX Hex Nut - Carling, 15/32-32UNS, for Toggle and Foot Switches
    Genuine Carling hex nut commonly used on full size toggle switches and footswitches. This nickel plated hex nut has a 15/32 threading.
    $2.25
    package of 5
    Don't see what you're looking for? Send us your product suggestions!