Switches

R-VOP1020 Switch - Vibrato LDR, for Fender® Amps
Optocoupler. Vibrato LDR for Fender Amps.
Fix the dead LDR style tremolo on your vintage Fender amps as well as others.
  • Non- polarized optical side is indicated by silver dot and slightly longer leads
  • Resistive side is indicated only by slightly shorter leads

This information can also be found within the diagram located in the Specifications, Files, and Documents section on this page.
$8.95
P-K338 Switch Tip - Fender®, Telecaster "Top Hat", Black
Tele "Top Hat" tip, black. Fender part: 099-4937-000
$8.70
P-H527 Switch - Carling, Toggle, DPDT, On-On, Solder Lugs
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .69" toggle length. On-On. Dimensions:
  • Body Length (less solder lugs) = 0.984"
  • Body Depth (height) = 0.580"
  • Body Width = 0.528"
  • Toggle Length =.69"

Note: On-On switches may sometimes be referred to as On-None-On.
$8.50
P-H512 Switch - Fender®, DPST, Power, for '94 Twin & Others
Original Fender®, Carling DPST standby/power for '94 Twin amp and other amp models - 3A, 250VAC; 6A, 125VAC.
$8.49
P-H497 Switch - Carling, Footswitch, DPDT, On-On, Side Solder Lugs
Good stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V
Note: On-On switches may sometimes be referred to as On-None-On.
$7.95
P-H501-PC Switch - Footswitch, 3PDT, Blue, PC Mount
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$7.95
P-H552 Footswitch - Carling, SPST, Off-(On), Solder Lugs
Carling, SPST footswitch, momentary Off-(On), normally open with solder lugs.
Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$7.95
P-H553 Switch - Carling, Footswitch, SPST, On-(Off), Solder Lugs
Carling footswitch, SPST, momentary On-(Off) normally closed with solder lugs.
Note: On-(Off) switches may sometimes be referred to as On-None-(Off).
$7.95
R-VTL5C1 Optocoupler - Vactec, for Channel Switching
VacTec Vactrol. Opto-isolator with 4 leads. Used in Crate and others.
$7.95
P-H410 Switch - Footswitch, 4PDT, Blue, 12 Pins
4PDT latching footswitch with solder lugs. Blue with 12 solder lugs. Made in Taiwan.
$7.95
P-SW64 Switch - 3-Way for Tele
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth.
Mounting screws included.
$7.95
P-H590-X Switch - Footswitch, 3PDT, LED Ring
Colors Available:
3PDT. LED ring requires a 3/4" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
P-H529 Switch - Carling, Toggle, DPST, On-Off, Solder Lugs, Short Bat
Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$7.85
P-ECB-233 Switch - Dunlop, PCM
ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.
$7.75
P-H523 Toggle Switch - Carling, DPDT, 2 Position, On-On, Terminals
Carling, 2 position DPDT toggle switch with screw terminals. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$7.65
P-SW63 Switch - 5-Way for Strat
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth.
Mounting screws included.
$7.50
P-H533 Switch - Carling, Toggle, DPDT, On-On, Short Bat
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On. Dimensions:
  • Body Length (less solder lugs) = 0.984"
  • Body Depth (height) = 0.580"
  • Body Width = 0.528"
  • Toggle Length =.500"
  • Bushing Length = .465”

Note: On-On switches may sometimes be referred to as On-None-On.
$7.50
P-H502 Switch - Selector, Vintage Style, for Marshall, Male
Vintage style selector switch male part, replacement for Marshall.
$7.45
P-H35-148 Switch - Toggle, DPDT, 3 Position, On-Off-On
3 position (on-off-on) heavy duty bat handle toggle switch with screw terminals. Made in USA.
  • Rating: 20A 125VAC, 10A 250VAC, 3/4" HP 125 - 250VAC
  • DPDT
  • Mounting Hole: .50in.
$7.25
P-H35-146 Switch - Toggle, DPDT, On-On, Screw Terminals
Heavy duty bat handle, DPDT. Rating: 20A 125V AC, 10A 277V AC Mounts in 1/2" hole, screw connections. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$6.95
P-H491 Switch - Rocker, Lighted Power, Used in JCM Series & Others
Lighted power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
$6.95
P-H492 Switch - Carling, Footswitch, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H501 Switch - Footswitch, 3PDT, Blue, Taiwan
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. Made in Taiwan.
$6.95
P-H521 Switch - Carling, Toggle, DPDT, 3 Position, On-Off-On, Terminals
Carling, 3 position DPDT toggle switch (on-off-on) with screw terminals.
$6.95
Save 9%
Originally: $7.65
Don't see what you're looking for? Send us your product suggestions!