Switches
Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$11.35
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$20.95
Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Colors Available:
Starting at $18.95
Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
- DPDT ( Double Pole/ Double Throw) switch
- 0.354" bushing length
- 0.409” bat length
- ¼" chassis hole diameter
- Solder terminals
Starting at $4.15
Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST latching On-Off footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$7.95
Footswitch - Carling, DPDT, Side Solder Lugs
Good latching stomp-box effects switch (Double Pole, Double Throw), On-On. Solder Lugs. 1A 250V, 3A 125V Note: On-On switches may sometimes be referred to as On-None-On.
$11.95
Switch - Carling, Toggle, SPST, On-Off, Solder Lugs
Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.
$4.59
Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
- Recommended .75 control cavity depth
- 1.406” center-to-center mounting hole spacing
- #4-40 screws recommended for mounting
- Screws not included
$5.35
Switch - GØRVA, Mini Toggle, DPDT, 3 Position, Solder Lugs, Medium Bat
Premium three position DPDT mini toggle switches from Gorva Design. The Bascular Mini switches have a medium 7.5mm actuator length. These switches feature silver plated copper contacts. RoHS compliant & lead-free. Mounting hardware included. Details
Features:
- 8.89 mm bushing length
- Medium bat
- 3-Position On/On/On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Features:
- Power Rating: DC9V, 1A
- Contact Resistance: <10mΩ
- Insulation Resistance: 1000MΩ Minimum
- Dielectric Strength: 1000V RMS @ Sea Level
- Operating Temperature: -40°C ~ +85°C
- Electrical Life: 40,000 Cycles
- RoHS & Lead-free
$1.95
Switch - Rotary, 3 Poles, 4 Position
3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft. 3P4T rotary switch.
$1.99
Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
$11.50
Switch - Carling, Toggle, DPST, On-Off, Solder Lugs, Short Bat
Carling, DPST toggle, 2-position, On-Off with solder lugs (3A, 125V), .500"" toggle length, 0.465" bushing length.
Note: On-Off switches may sometimes be referred to as On-None-Off.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$9.95
Switch - Carling, Toggle, DPDT, On-On, Solder Lugs
Carling, DPDT 2 position toggle with solder lugs (6A, 125V). 0.687" toggle length. On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$9.65
Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT latching footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
Switch - Carling, Mini Toggle, DPDT, 3 Position, Lugs, Short Bat
Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 3-Position
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
- Solder lugs
Starting at $5.25
Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
.3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.
Starting at $1.80
Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
$36.39
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.
- 0.354" bushing length
- 3-Position On/Off/On
- ¼" mounting hole diameter
- Single pole/Double throw (SPDT)
- Solder lugs
$4.95
Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
- 0.354" bushing length
- 1/4" mounting hole diameter
- On-On Three pole/double throw (3PDT)
$4.95
Switch - Pickup Selector, Telecaster, 3-Way
Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.
$5.35
Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
$4.95
Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Flatted
Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.
- 0.354" bushing length
- 2 Position On-On
- ¼" mounting hole diameter
- Double pole/Double throw (DPDT)
$6.55
Footswitch - 3PDT, with built-in LED Ring
3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Colors Available:
Starting at $7.95
Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.
$6.45