Switches

P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.59
W-SC-W01 Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$16.95
P-SW66X Switch - Les Paul 3 Position, US Retro-Fit
Cap Colors Available:
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
$7.49
P-H395 Switch - Rotary, 3 Poles, 3 Position
Rotary Switch, 3 Poles, 3 Positions (12 solder terminals), Make Before Break. 1/4 solid shaft Bushing width: 11/32" Bushing height: 5/16" Includes nut & washer 0.3A 125VAC
$2.50
P-SW64 Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
W-SC-W10 Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Screws not included
  • See S-HS440-12 for compatible screws
$3.25
P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.79
P-H511 Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary, push switch. Mounts in square hole approximately. 55" x.55" x 1.08" overall length including terminals.
$2.50
P-H394 Switch - Rotary, 3 Poles, 4 Position
3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft.
$1.95
P-SW51 Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
$9.50
W-SC-S1028 Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
$0.45
P-H526 Switch - Carling, Toggle, SPST, On-Off, Solder Lugs
Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$3.50
P-H544 Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
  • SPDT ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

Note: On-On switches may sometimes be referred to as On-None-On.
$2.50
P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
Colors Available:
Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with M12 bushings.
Starting at $0.90
P-H494 Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position toggle switch. Great Fender ground switch replacement.
$4.95
P-H562X Switch - Carling, Mini Rocker, SPST, 16A, 125VAC
Carling miniature rocker switch, SPST with .25" tabs. 0.48" x 1.072" mounting hole diameter, 16A, 125 VAC. Since its introduction, the Curvette switch has become the barometer for versatility and performance in the switch market. Self cleaning contacts and international approvals make the Curvette the switch of choice for many markets. Two color visi rocker to indicate “on” function. Patented mounting wings accommodate a wide range of panel openings.
$1.10
P-H524 Switch - Carling, Toggle, DPST, On-Off, Tabs, 6A
Carling, DPST 2 position toggle switch, On-Off with .25" tabs (6A, 125VAC). Note: On-Off switches may sometimes be referred to as On-None-Off.
$4.65
W-SC-W0213 Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $15.95
P-SW50 Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
$11.50
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$1.75
P-H495-T Switch - Toggle, SPST, for Fender®
SPST. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.
$2.45
R-VTL5C1 Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$7.95
P-H552X Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$7.95
P-H501-PC Footswitch - 3PDT, Blue, PC Mount, latching-type
3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.
$7.95
Don't see what you're looking for? Send us your product suggestions!