Switches

P-H495 Switch - Carling, Toggle, SPST, Replacement for Fender®
Fender® style power and/or standby switch (Single Pole, Single Throw). This latching On-Off switch is a great replacement for older Fender® amps where the shorter toggle length (1/2”) is desired.
$5.95
P-H54-DRESS-X Nut - Dress Nut, For Mini Toggle Switches
Colors Available:
Dress nuts for use with mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
Starting at $0.75
P-H540 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$3.69
P-H530 Switch - Carling, Toggle, SPST, On-Off, Side Solder Lugs
Carling, 2 position, On-Off, SPST with solder lugs, 1/2" mounting hole. Note: On-Off switches may sometimes be referred to as On-None-Off.
$5.15
P-H600-A Switch - Rotary, 1 Pole, 3 Position
High quality three position rotary switch commonly used as an impedance selector switch on tube amps. This rugged switch is rated for 6A at 125VAC and 3A at 250VAC. The flatted 6mm shaft can be used with the shaft adapter found in the accessories below to easily fit standard ¼” knobs. Mounting hardware included. SP3T.
$12.95
P-H548 Switch - Carling, Mini Toggle, SPDT, 2-Position, PC Pins
Carling mini-toggle switch, SPDT, PC Pins. 2-Position.
  • 0.354" bushing length
  • 2-Position On/On
  • ¼" mounting hole diameter
  • Single pole/Double throw (SPDT)
  • PC mount pins
$3.25
P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT, 2 Position, On-On. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.64
W-SC-W10 Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position On-On slide switch for use on Jazzmaster and Jaguar style guitars. Also used for bright switches in Fender black and silverface amplifiers. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Latching
  • Screws not included
  • See S-HS440-12 for compatible screws
$4.45
P-H5410 Switch - Carling, Mini Toggle, DPDT, 2 Position, Solder Lugs, Short Bat
Carling mini-toggle switch, DPDT, 2 position, ¼" mounting hole diameter, 0.354" bushing length.
$3.85
P-H542X Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $4.15
S-HM300N Nut - Marshall style, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    P-H5411 Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs, Short Bat
    Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
    $3.85
    W-SC-W11 Switch - Switchcraft, Slide, DPTT, 3-Position
    Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
    • Recommended .75 control cavity depth
    • 1.406” center-to-center mounting hole spacing
    • #4-40 screws recommended for mounting
    • Screws not included
    $5.35
    P-H544 Switch - Carling, Mini Toggle, SPDT, On-On, PC Mount, right angle
    Genuine Carling 2 Position Mini Toggle, On-On, Short Round Bat, Right Angle, PC Mount Features:
    • SPDT ( Single Pole/ Double Throw) On-On switch
    • 0.275" bushing length
    • 0.270” bat length
    • ¼" chassis hole diameter
    • Right angle, PC Mount terminals

    Note: On-On switches may sometimes be referred to as On-None-On.
    $3.85
    P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.25
    P-H1700 Switch - Rotary, Impedance Selector, Replacement for Marshall
    Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.
    $34.95
    On Backorder
    P-H491 Switch - Rocker, Lighted Power, Used in JCM Series & Others
    Lighted DPST On-Off power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
    $12.50
    P-H1701 Switch - Rotary, Impedance Selector, 3 Position
    Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.
    $16.95
    P-H5412 Switch - Carling, Mini Toggle, SPDT, 3 Position, Solder Lug
    Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On
    $4.95
    P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
    Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
    $1.15
    P-H494 Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
    1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.
    $6.45
    P-H546X Switch - Carling, Mini Toggle, DPDT, 3-Position, PC Pins
    Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
    Starting at $3.85
    P-H713-11B Switch - Black Bat, Toggle, SPST, On-Off, Vintage Marshall Style, Solder Lugs
    Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
    $3.75
    P-H502 Switch - Selector, Vintage Style, for Marshall, Male
    Vintage style selector switch male part, replacement for Marshall.
    $12.95
    Don't see what you're looking for? Send us your product suggestions!