Switches

P-H600 Switch - Rotary, 1 Pole, 3 Position
Solid 6mm Shaft, 6A 125VAC, 0.39" bushing diameter. 1 pole, 3 position. Break before make (non-shorting) Adjustable stop with slotted spring pin (3 position or 2 position).
$10.50
P-H392X Switch - Rotary, 2 Poles, 6 Positions, ¼" Shaft
.3A 125VAC. 2 pole, 6 position, solid ¼" shaft.
$1.75
P-H562X Switch - Carling, Mini Rocker, SPST, 16A, 125VAC
Carling miniature rocker switch, SPST with .25" tabs. 0.48" x 1.072" mounting hole diameter, 16A, 125 VAC. Since its introduction, the Curvette switch has become the barometer for versatility and performance in the switch market. Self cleaning contacts and international approvals make the Curvette the switch of choice for many markets. Two color visi rocker to indicate “on” function. Patented mounting wings accommodate a wide range of panel openings.
$1.10
W-SC-W10 Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Screws not included
  • See S-HS440-12 for compatible screws
$2.95
P-H491 Switch - Rocker, Lighted Power, Used in JCM Series & Others
Lighted power switch. Used in Marshall JCM series and others. 15/16" x 1-1/16" x 1" deep.
$6.95
On Backorder
P-H1700 Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side.
$26.95
W-SC-W11 Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.406” center-to-center mounting hole spacing
  • #4-40 screws recommended for mounting
  • Screws not included
$4.75
P-H390X Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
.3A 125 VAC. 1 pole, 12 position, solid ¼" shaft.
Starting at $1.75
P-H489 Switch - Marshall, Rocker, Power for MG Amps, Black
Original Marshall™. Black rocker switch for MG amps. 0.51" x 0.76" Mounting Hole. DPST.
$3.95
P-H1701 Switch - Rotary, Impedance Selector, 3 Position
Rotary impedance selector, 4/8/16. Body screws onto chassis hole.
$13.50
P-H502 Switch - Selector, Vintage Style, for Marshall, Male
Vintage style selector switch male part, replacement for Marshall.
$7.45
P-H561 Switch - Carling, Mini Rocker, DPST, On-Off
Carling miniature rocker switch, DPST with .187" tabs (Marshall style). On-Off. 4A 250VAC; 8A 125VAC; 6A 250V. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
$2.10
P-H396 Switch - Carling, Rotary, Off-On, Solder Lug
Single pole multi-position, general purpose rotary switch. This switch features a nylon actuator in a metal clad construction along with a self-cleaning silver plated contact design. Typically used in applications requiring multi-position controls.
$7.95
P-H490 Switch - Rocker, Standby for JCM Series & Others, Black
For Marshall™, JCM series and others. 15/16" x 1 1/16" x 1" deep.
$5.15
P-H560 Switch - Carling, Mini Rocker, SPST, On-Off
Carling miniature rocker switch, SPST with .187" tabs (Peavey Style). Matte Finish. Black base/actuator. This switch is ideal for applications with back panel size constraints. It fits in a standard rectangular cutout and is designed to provide ease of insertion along with superior panel retention qualities. A high profile rocker and butt-action contacts provide the user with a crisp positive-type feel.
$1.10
S-HM100-A Switch - Rotary, Voltage Selector, Modern, for Marshall
  • Ratings:
    • IEC: 6.3 A / 250 VAC; 50 Hz
    • UL: 10 A / 250 VAC; 60 Hz
    • CSA: 8 A / 250 VAC; 60 Hz
  • Mounting: Panel Mount from front side
  • Fastening: Screw-on mounting
  • Terminal: Solder
  • Number of Stages: 3
  • Lifetime: 300 operating cycles (without load)
  • Degree of Protection: IP 40
  • Allowable Operation Temp.: -40 °C to 85 °C
  • Climatic Category: 25/85/21 acc.
$29.95
P-H1600-A Switch - Rotary Impedance Selector, for Hammond 1600A series
Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G) (See P-H1600 for a selector switch to work with Hammond 1600 series transformers.)
$11.95
P-H517 Switch - Fender®, Rocker, DPST, Pseudo-IEC
Fender Switch Rocker DPST Pseudo-IEC. 1.07" x 1.18" mounting hole, .25" tabs, 20A, 125VAC.
$2.75
P-H507 Switch - Peavey, Rocker, SPST, On-Off
Peavey SPST rocker switch, On-Off, with molded dot to indicate 'on' position, can be used in Classic VTX. 5A 125VAC, 2A 250VAC
$1.85
P-H1600 Switch - Rotary Impedance Selector, for Hammond 1600 Series
Includes: 3 pole, 4 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600 series transformers all provide secondary impedances of 4, 8, or 16 ohms but due to the unique wiring of the secondary, the impedance cannot be changed without rewiring... Until now. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary.
$11.95
P-H35-242 Switch - Alpha, Slide, DPDT, Replacement for Fender®
Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.
$1.35
P-H394 Switch - Rotary, 3 Poles, 4 Position
3 pole, 4 position (make before break) rotary switch with a ¼" solid shaft.
$2.25
P-H395 Switch - Rotary, 3 Poles, 3 Position
Rotary Switch, 3 Poles, 3 Positions (12 solder terminals), Make Before Break. 1/4 solid shaft Bushing width: 11/32" Bushing height: 5/16" Includes nut & washer 0.3A 125VAC
$2.50
Don't see what you're looking for? Send us your product suggestions!