Switches

P-H530 Switch - Carling, Toggle, SPST, On-Off, Side Solder Lugs
Carling, 2 position, On-Off, SPST with solder lugs, 1/2" mounting hole.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$3.95
P-H600 Switch - Rotary, 1 Pole, 3 Position
Solid ¼" Shaft, 6A 125VAC, 0.39" bushing diameter. 1 pole, 3 position. Break before make (non-shorting) Adjustable stop with slotted spring pin (3 position or 2 position).
$10.50
W-SC-W12 Switch - Switchcraft, Toggle, 3-way, for Les Paul
One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.
$18.95
P-H392X Switch - Rotary, 2 Poles, 6 Positions, ¼" Shaft
.3A 125VAC. 2 pole, 6 position, solid ¼" shaft.
$1.75
P-H542X Switch - Carling, Mini Toggle, DPDT, 3 Position
Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs
  • DPDT ( Double Pole/ Double Throw) switch
  • 0.354" bushing length
  • 0.409” bat length
  • ¼" chassis hole diameter
  • Solder terminals
Starting at $3.10
P-SW66X Switch - Les Paul 3 Position, US Retro-Fit
Cap Colors Available:
LP/PRS style 3 position pickup selector switch. M3.5 x 0.60 switch cap threading.
Starting at $7.12
P-H493 Footswitch - Carling, SPST, for Fender® Switching Pedals
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
$5.95
P-SW51 Selector Switch - Fender®, Pickups, American Strat 5-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality 5-position pickup selector switch. Includes mounting screws, one white and one black switch tip.
$8.95
W-SC-W10 Switch - Switchcraft®, Slide, DPDT, Jazzmaster / Jaguar
Genuine Switchcraft® DPDT 2-position slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Screws not included
  • See S-HS440-12 for compatible screws
$2.95
P-H1700 Switch - Rotary, Impedance Selector, Replacement for Marshall
Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side.
$26.95
P-H492 Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
$6.95
P-H526 Switch - Carling, Toggle, SPST, On-Off, Solder Lugs
Carling, SPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico.
Note: On-Off switches may sometimes be referred to as On-None-Off.
$3.50
P-H604 Footswitch - SPST, Momentary, Solder Lugs, Soft Switch
SPST(single pole,single throw) normally open, Off-(On) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.
  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

Note: Off-(On) switches may sometimes be referred to as Off-None-(On).
$2.85
P-H494 Switch - Carling, Toggle, SPDT, 2 Position, for Fender®
1A, 250V; 3A, 125V. Carling SPDT 2 position toggle switch. Great Fender ground switch replacement.
$4.25
W-SC-W11 Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.406” center-to-center mounting hole spacing
  • #4-40 screws recommended for mounting
  • Screws not included
$4.75
P-H590-X Footswitch - 3PDT, LED Ring
Colors Available:
3PDT. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.
Starting at $7.95
P-SW50 Switch - Fender®, Pickup Selector, Strat & Tele 3-Way
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 3 position switch with knob and mounting hardware.
$10.95
P-H533 Switch - Carling, Toggle, DPDT, On-On, Short Bat
Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$7.50
P-H495-T Switch - Toggle, SPST, for Fender®
SPST. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.
$1.95
P-H534 Switch - Carling, Mini Toggle, 3PDT
Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.
  • 0.354" bushing length
  • 1/4" mounting hole diameter
  • Three pole/double throw (3PDT)
$3.50
P-H552X Footswitch - Carling, SPST, Momentary, Solder Lugs
Carling, SPST footswitch, momentary with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$7.95
P-H390X Switch - Rotary, 1 Pole, 12 Positions, ¼" Shaft
.3A 125 VAC. 1 pole, 12 position, solid ¼" shaft.
Starting at $1.75
P-H550 Footswitch - DPDT, Bottom Solder Lugs
Carling, DPDT footswitch, On-On, with solder lugs. Provides a compact yet rugged solution to general purpose switch needs. Alternate action, metal construction and stiff (6-8 lb) actuation force have combined to make this switch a pillar in a variety of markets.
$10.95
P-H527 Switch - Carling, Toggle, DPDT, On-On, Solder Lugs
Carling, DPDT 2 position toggle with solder lugs (6A, 125V). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.
$8.50
Don't see what you're looking for? Send us your product suggestions!