Speakers & Components

Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.

Celestion

Founded in 1924, Celestion has grown to become one of the world's largest manufacturers of loudspeakers.
P-A-T5806 Speaker - Celestion, 18", CF18VJD, 1600 watts
Special Order Item
Speaker, Celestion, CF18VJD, 18 in., 8 ohm Features:
  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1600Wrms (AES Standard) power handling and 97dB sensitivity
  • 5" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented front plate increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion
$444.22
Note: special order items require additional lead time. See our page on special order items.
P-A-T5683X Speaker - Celestion, 2", CDX20-3000, 75W
Special Order Item
Speaker, Celestion, CDX20-3000, 2 in. Features:
  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
$439.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5640 Speaker - Celestion, 1.4". CDX14-3050, 75W ,8Ω
Special Order Item
Neodymium magnet compression driver
$330.76
Note: special order items require additional lead time. See our page on special order items.
P-A-T5863 Speaker - Celestion, 18", CF1840JD, 1000 watts
Special Order Item
Speaker, Celestion, CF1840JD, 18 in., 8 ohm Features:
  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 1000Wrms (AES Standard) power handling and 98dB sensitivity
  • 4" high temperature, dual layer, Inside/Outside voice coil for higher efficiency, preventing sensitivity loss through thermal compression
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Vented magnet assembly increases airflow to provide enhanced cooling
  • Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion
  • Double suspension and "multi-roll" surround provide exceptional linearity at extremes of cone excursion
$304.58
Note: special order items require additional lead time. See our page on special order items.
P-A-T5602 Speaker - Celestion, 18", FTR18-4080HDX, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$278.40
Note: special order items require additional lead time. See our page on special order items.
P-A-T5460 Speaker - Celestion, 18", FTR18-4080FD, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$234.76
Note: special order items require additional lead time. See our page on special order items.
P-A-T5838 Speaker - Celestion, 2", CDX20-3075, 75 watts
Special Order Item
Speaker, Celestion, CDX20-3075, 2 in., 8 ohm Features:
  • 2" exit, neodymium magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 107dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
$229.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5779 Speaker - Celestion, 1.4", CDX14-2420, 70W, 8Ω
Special Order Item
Neodymium magnet compression driver
$226.04
Note: special order items require additional lead time. See our page on special order items.
P-A-T5607 Speaker - Celestion, 12", FTR12-4080HDX, 1000W 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$199.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5611 Speaker - Celestion, 15", FTR15-4080HDX, 1000W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$191.13
Note: special order items require additional lead time. See our page on special order items.
P-A-T5828 Speaker - Celestion, 18", CF1830E, 700 watts
Special Order Item
Speaker, Celestion, CF1830E, 18 in., 8 ohm Features:
  • 18" ferrite magnet, cast aluminium chassis LF driver delivering 700Wrms (AES Standard) power handling and 94dB sensitivity
  • 3" high temperature, multi-layer voice coil for greater motor force
  • FEA optimized magnet assembly and suspension deliver highly symmetrical cone movement, leading to exceptionally low harmonic distortion
  • Balanced Airflow Venting (BAV) on the front-plate increases airflow to provide enhanced cooling
  • Dual Magnet Motor (DMM) incorporates a secondary magnet used to increase overall motor force (Bl) without the need for any additional increase in magnet size
  • “Multi-roll” surround provides exceptional linearity at extremes of cone excursion
$189.00
Note: special order items require additional lead time. See our page on special order items.
P-A-T5458 Speaker - Celestion, 15", FTR15-4080F, 600W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-4080F, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 600Wrms power handling (AES Standard) and 97dB sensitivity
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Low frequency response, down to 35Hz
  • Smart chassis design minimises acoustic distortion
  • Specially treated weather-resistant cone
$170.18
Note: special order items require additional lead time. See our page on special order items.
P-A-T5499 Speaker - Celestion, 15", FTR15-3070E, 400W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$169.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5827 Speaker - Celestion, 1.4", CDX14-3060, 75 watts
Special Order Item
Speaker, Celestion, CDX14-3060, 1.4 in., 8 ohm Features:
  • 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading
$164.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5896 Speaker - Celestion, 1.4", CDX14-3030, 75 watts
Special Order Item
Speaker, Celestion, CDX14-3030, 1.4 in, 8 ohm Features:
  • 1.4" exit, ferrite magnet, 3" voice coil compression driver provides 75Wrms (AES standard) power handling and 106.5dB sensitivity
  • Next generation Sound Castle™ soft clamping assembly reduces diaphragm stress for decreased distortion and even greater reliability of performance
  • One piece titanium diaphragm and surround
  • Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design
$164.95
Note: special order items require additional lead time. See our page on special order items.
P-A-T5387 Speaker - Celestion, 15", FTR15-3070C, 400W, 8Ω
Special Order Item
Speaker, Celestion, FTR15-3070C, 15 in., 8 ohm Features:
  • 15" ferrite woofer provides 400Wrms power handling (AES Standard) and 99dB sensitivity
  • 3" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Flexirol TM surround for greater excursion control
  • Saturated gap technology for lower harmonic distortion
  • Low frequency response, down to 40Hz
  • Smart chassis design minimises acoustic distortion
$156.22
Note: special order items require additional lead time. See our page on special order items.
P-A-T5713 Speaker - Celestion, 1", CDX1-1720, 50W, 8Ω
Special Order Item
Neodymium magnet compression driver
  • 1" exit, lightweight and compact compression driver featuring neodymium magnet and 1.75" diameter titanium diaphragm
  • 50Wrms (AES standard) power handling and 107dB sensitivity
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Lower resonance enabling lower crossover frequency
  • Patented phase plug design method suppresses cavity resonances at frequencies higher than that of convential designs
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Curved coherent wavefront, optimised for horn loading
$152.73
Note: special order items require additional lead time. See our page on special order items.
P-A-T5486 Speaker - Celestion, 1", CDX1-1731, 40W, 8Ω, screw
Special Order Item
Neodymium magnet compression driver, screw version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
$130.04
Note: special order items require additional lead time. See our page on special order items.
P-A-T5485 Speaker - Celestion, 1", CDX1-1730, 40W, 8Ω, flange
Special Order Item
Neodymium magnet compression driver, flange version
  • 1" exit, neodymium magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
  • 40Wrms (AES standard) power handling and 110dB sensitivity
  • Designed with Sound CastleTM clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
  • One piece PETP film diaphragm and surround
  • Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
$130.04
Note: special order items require additional lead time. See our page on special order items.
P-A-T5644 Speaker - Celestion, 12", FTR12-3070C, 350W, 8Ω
Special Order Item
Ferrite magnet cast aluminium chassis driver
$121.31
Note: special order items require additional lead time. See our page on special order items.
P-A-T5367 Speaker - Celestion, 1", CDX1-1430, 50W, 8Ω
Special Order Item
Neodymium magnet compression driver
$112.58
Note: special order items require additional lead time. See our page on special order items.
P-A-T5343 Speaker - Celestion, 1", CDX1-1415, 20W, 8Ω
Special Order Item
Neodymium magnet compression driver
$109.99
Note: special order items require additional lead time. See our page on special order items.
P-A-T5344 Speaker - Celestion, 1", CDX1-1425, 25W, 8Ω
Special Order Item
Neodymium magnet compression driver
$100.36
Note: special order items require additional lead time. See our page on special order items.
P-A-T5848 Speaker - Celestion, 1", CDX1-1747, 60W, 8Ω
Special Order Item
Ferrite magnet compression driver
$86.40
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!