Speakers & Components
Speakers. The last opportunity to modify your tone. Unlike hi-fi speakers which attempt to create sounds that are true to the musical source fed them, guitar speakers impart their own tone. Your amp/cabinet pretty much determines three things about what speaker to select; speaker size, impedance and power rating. (See our tech corner article on Speaker Impedance, Power Handling and Wiring). But the tone is up to you! Speaker replacement is probably the easiest mod you can perform.
Speaker - Jensen® Vintage Ceramic, 10", C10Q, 35W
Adopted primarily in the Vibrolux® and Vibroverb® amps of the Brownface and Blackface era, the C10Q is a very easy to drive speaker that breaks up nicely with straightforward biting character. It was also very common in many Silvertone® and Valco® amps. It loves the 2x10 configuration and the floating baffles.
Speaker - Jensen® Vintage Ceramic, 10", C10R, 25W, 8Ω
Developed as the ceramic version of the P10R, for low-powered studio amps, the C10R is revered for having been the speaker of the Blackface Princeton®, the Princeton Reverb® and many others. The combination of the warm sounding circuit of the Princeton and the bright, colorful tone of the C10R delivers magical tones in any recording session.
Speaker - Jensen® Jets, 10", Falcon, 40W, Ferrite
A very successful and versatile 10”, the Falcon 10 adds a new dimension of openness to the classic, fat and warm tone of its 12” version. The seamed cone membrane delivers an unexpected bass response for its 10” size and it is balanced perfectly with its sweet, yet cutting and present high end.
Speaker - Jensen® MOD®, 10", MOD10-50, 50W
The Mod 10-50 is a 10" ferrite speaker with 50 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it exhibits a colorful fuzz edge.
Speaker - Jensen® MOD®, 10", MOD10-35, 35W
The Mod 10-35 is a 10" ferrite speaker with 35 watts of power. Warm, straightforward tone and tight bass frequencies. When presented with overdrive distortion, it takes on a gritty edge.
Speaker - Eminence® Bass, 10", Legend BP102, 200W
Bass guitar 10" speaker, 4 ohm. Recommended for professional bass guitar applications in a sealed or vented enclosure. Works well in single or multi driver designs.
Speaker - Celestion, 10", G10M Greenback, 30W
The 10" that thinks it's a 12". This speaker was developed to recapture the legendary sound of Celestion's 1970s 10s - a 10" speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12", the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end. Presented with overdrive distortion, it displays a well balanced crunch.
Speaker - Jensen® Jets, 10", Electric Lightning, 50W
The Electric Lightning 10 shines and shimmers with clean tones, because of its exceptional response on the upper frequencies. The midrange and bass may seem slightly subdued, yet the tonal balance is remarkably even. Capable of cutting through any mix, the Electric Lightning 10 delivers warmth, boldness and articulation.
Speaker - Jensen® MOD®, 10", MOD10-70, 70W, 8Ω
The Mod 10-70 is a 10" ferrite speaker with 70 watts of power. Thick, straightforward tone and fat bass frequencies. It exhibits a bass heavy, dirty grit when presented with overdrive distortion.
Speaker - Celestion, 10", G10 Creamback, 45W
The beloved Creamback is finally in a 10 inch package. The G10 Creamback is hand-built in the U.K. using the same materials and construction techniques as its 12” counterparts. The Creamback series offers increased power handling with a vintage British voicing.
Speaker - Eminence®, 10", Legend 1058, 75W, 8 Ω
Lead/rhythm guitar 10" speaker. Vintage American tone with punchy lows and warm, smooth, bluesy mids and highs. Fatter Legend 1028K tone with more depth.
Speaker - Eminence® Patriot, 10", Ragin Cajun, 75W
Lead/rhythm guitar 10" American speaker, 8 ohm. Very loud, touch sensitive and responsive with nice bell sounding top end and a little bite.
Speaker - Jensen Punch Bass, 10", BP10/150, 150W, 8Ω
The Punch BP 10/150 is a 10" ferrite speaker with 150 watts of power. Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound. Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required. The 10'' bass speaker provides good projection with minimal effort especially in a two or four 10'' cabinet. The sound is powerful in either a single or multi speaker combination.
Speaker - Celestion, 10", G10R Ten 30, 30W
The Ten 30, from the Celestion "Originals" line of guitar speakers, is rich and expressive, combining warm lows with a vocal mid-range and an articulate top end. The clean sound is open and revealing; push hard and you're rewarded with full-blooded Celestion grind.
Speaker - Eminence® Bass, 10", Legend B810, 150W, 32Ω
A 32 ohm, 10" bass guitar speaker offering classic sound with modern features.
Speaker - Celestion, 10", Vintage G10, 60W
A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.
Speaker - Celestion, 10", T.F. Series 1020, 150W 8Ω
The 1020 is a bass and mid range driver with a high sensitivity. It is ideally suited to compact enclosures and high pass systems.
Speaker - Eminence® Redcoat, 10", Ramrod, 75W, 8Ω
Lead/rhythm guitar 10" British speaker. Very loud, gutsy, and meaty tone with singing highs and nice, clear overtones
Speaker - Celestion, 10", Pulse 10, 200W, 8Ω
With its robust steel-chassis, the PULSE10 provides a rock-solid bass performance whether alone in a single speaker combo, in a 4x10 or even an 8x10 cab. Expect a tight, punchy low end with a warm mid-range that's full of presence, bringing focus and articulation to your playing. This heavy-duty driver truly delivers bass you can feel as well as hear.
Speaker - Eminence® Patriot, 10", Lil' Buddy, 50W, 8Ω
Lead/rhythm guitar 10" speaker with hemp cone. A clean and full tone, slow to break-up, but crunchy when driven. Smoother and less defined than many 10" guitar speakers.
Speaker - Eminence®, 10", GA10-SC64, 20W, 8Ω, Ferrite
Tones of 1964 still ring true in this vintage voiced 10 inch speaker by amp guru George Alessandro. Very balanced with dynamic character, this ceramic 10 inch speaker offers tight, punchy tone with nice warmth, richness, and sparkling highs.
Speaker - Eminence American, 10", Delta 10, 350W, 8Ω
Recommended for professional audio and bass guitar applications as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures.
Speaker - Celestion, 10", BL10-100X, 100W, 8Ω
Special Order ItemBuilt for bass without compromise, the 100-watt BL10-100X is a 10 inch bass guitar speaker that delivers heavy duty presence with drive, clarity and a full-bodied tone.
Out of Stock
Speaker - Eminence®, 10", Legend CA10, 200W, Ferrite, 8 Ω
Special Order ItemMade famous as an OEM model in many popular bass guitar cabinet brands, this highly sought after design features a truncated cast frame chassis for tight fitting in your 2x, 4x and 8x10 cabinet. Loud and clear bass guitar tone with legendary growl.
Out of Stock